Pemulangan

Barbaric RTS Compact

Tahun pembuatan: 2024, Kondisi: baru, returnsystem Ksdpfsw Nadmox Aahsfa

Tahun pembuatan: 2010, Kondisi: bekas, Panel return system for use with a single edge banding machine. The panel is transported to the operator via a motorized belt and a roller/belt table. Equipped with Moeller mini control unit. Maximum panel dimensions: 2500 x 1450 mm. Maximum panel thickness: 60 mm. Working speed: 8 - 25 m/min. Working height from floor: 835 - 960 mm. Ksdpfxorq Dmro Aahjfa

Kondisi: baru, Tahun pembuatan: 2025, Firebox output: 350 kW Rated output: 279 kW Flue diameter: 200 mm Hot air supply ducts: 3 x 300 mm Firebox length: 1200 mm Firebox width: 740 mm Firebox height: 1040 mm Air delivery rate: 17,800 m³/h Power consumption (hot air blower): 3 kW Power consumption (flue gas fan): 600 W Kedpfx Ask Utrtsahefa Designed for room volume: 5,000 m³ Heated area: 1,000 m² Oven height (without hot air supply ducts): 2,500 mm Oven width: 1,100 mm Oven length (without flue gas fan): 1,900 mm Weight: 850 kg

Kondisi: baru, Tahun pembuatan: 2024, High-quality housing made of galvanized steel Powerful, economical motors Standard configuration with selectable intake connection (top or bottom) Uniform filter bags for all variants Kedpfx Aaefc A Urehsfa Discharge into chip collection bins The modular AL-KO AAS series models are available in optimally matched performance categories, featuring energy-saving and quiet motors that drive the raw air side fan to generate particularly effective positive pressure filtration. Durable quality components and an all-metal housing made from galvanized steel sheet ensure long-term investment security, as do the wide range of retrofit options. The particularly attractive price and short assembly times also guarantee that the AL-KO AAS is certainly the right choice. Technical data AL-KO AAS 3013 Intake connection: 200 mm Nominal airflow: 2,500 m³/h Maximum airflow: 3,300 m³/h Maximum negative pressure: 2,700 Pa Filter area: 3 x 2.2 m² Chip collection volume: 3 x 175 liters Motor power: 3.0 kW / 400 V Dimensions (LxWxH): 2486 x 578 x 2115 mm Weight: 139 kg

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface Kedpfx Aaevvkfdehjfa - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: baru, Tahun pembuatan: 2023, Two tables are connected via tandem control for a combined load capacity of 5,000 kg. Technical Description with Key Data: Ksdpfxjk E Hmts Aahefa Load capacity: 3,000 kg static distributed load Useful stroke: 800 mm Installation height: 240 mm Total height: 1,040 mm Platform length: 1,300 mm Platform width: 1,000 mm Material: Smooth sheet metal Lifting time: approx. 18 sec. for full stroke Lowering time: load-dependent Electrical connection: 3 x 400 V / 50 Hz + protective earth, with 16 A CEE plug and 3 metre cable Motor: 2.2 kW, 1,400 rpm Valve voltage: 24 V DC Protection class: IP 54 overall, solenoid valve and switches IP 65 Paint finish: Steel blue RAL 5011 Power unit position: integrated in the lifting table Control box: dead man's control with 2 m cable Total weight: approx. 330 kg Tandem control for simultaneous operation. Note: 100% synchronized operation cannot be guaranteed. Any height differences that occur are compensated in the base and upper positions! The safety edge strips of both lift tables are NOT interconnected. Minimum distance between the lifting tables: 500 mm. Maximum distance: 3,000 mm. Self-supporting base frame with 4 flanged wheels in which the lift table is mounted. 4 ball-bearing mounted flanged wheels, wheel Ø150/175, heavy-duty version, machined from C45 steel. Installation height + approx. 50 mm.

Kondisi: hampir baru (bekas), Horizontale Stahltanks, 73.000 l Fassungsvermögen Kfjdsibh S Hjpfx Aahsa Abmessungen: 3 Stück je 11 m Zylinderdicke: 8 mm Bodendicke: 12 mm Ausgestattet mit Leiter.

Kondisi: baru, AGRE ALUP ALLEGRO 14+ 13 270 Speed-controlled. Space-saving. Cost-effective. Efficient 1:1 direct drive. Easy operation. Low energy consumption. High performance. Suitable for a wide range of applications. Impressive compressed air quality. Cyclone separator and refrigeration dryer integrated. Detailed equipment: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor, with 1:1 direct drive Control: Speed-regulated with frequency inverter Controller: Graphic controller C55DD Refrigeration dryer: Integrated, refrigerant R513A Filtration: Incl. cyclone separator Tank: Horizontal, painted Performance data: Free air delivery at operating pressure 7.0 bar = 0.26-2.26 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load: 16.2 kW Rated motor power: 15 kW Oil quantity: 5.2 l Kfjdpfx Ajixt I Hjahja Dimensions and Weight: L x W x H = 1655 x 655 x 1550 mm Weight: 400 kg Compressed air outlet: G 3/4'' Compressed air receiver capacity: 270 l

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 380 V, diameter sambungan ekstraksi: 120 mm, lubang pisau gergaji: 30 mm, kedalaman pemotongan: 110 mm, diameter utama gergaji: 400 mm, diameter nosel ekstraksi: 120 mm, hentian panjang: 3.200 mm, lebar kerja: 1.100 mm, Perlengkapan: rem mesin, Format 4 x motion in excellent condition, always operated by a single person Kjdpfxov Aywpj Aahsfa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 730 h, Edgebanding machine Hebrock AKV3005DK-F with jointing, corner rounding, and double scraper units. Very well-maintained machine from a small business, in excellent condition. Touch-screen interface with PLC control for simple operation, allowing storage of up to 12 programs. Edge thickness (roll): approx. 0.4 – 3 mm Workpiece height: approx. 8 – 53 mm Feed speed: approx. 10 m/min Noise reduction hood Extendable workpiece support, special version extendable up to 950 mm Extraction connection: 80 + 140 mm Units/Aggregates: Quick-change glue pot with glue outlet, two glue pots included (one has been used for EVA adhesive, one for PU adhesive; the PU glue pot is nearly new and was only purchased for a specific job). Manual pressure adjustment with SIKO counter Manual infeed fence adjustment with SIKO counter Manual edge thickness adjustment with SIKO counter Kfodpfx Astpn Etjahoa Joint milling unit with Leitz Whispercut DIA cutters, still sharp Gluing unit with automatic edge feeding for coil material up to 3 mm Pressure zone with 4 rollers End trimming saw Integrated edge scrap container Combination milling unit R2 with pneumatic switching for thin and thick edges Corner rounding unit R2, pneumatically adjustable for thin and thick edges The contour milling unit can also be used in shelf program mode, i.e., only the straight edge is rounded, not the corners. Radius scraper R2, pneumatically retractable Glue joint scraper, pneumatically retractable Hood interlock CE marking Operating manual A video of the running machine can be sent upon request. All turn plates for the milling and scraper units have been renewed or rotated; saws have been sharpened. The machine is ready for immediate use. Only the joint DIA cutters (Whispercut) have not been renewed but are still sharp. Paint damage has been touched up. The Hebrock AKV series is the predecessor of the current K series. The machine has only approx. 730 operating hours (glue pot on), and the frequency inverters have only been powered for approx. 455 hours. The machine is in very good condition; see original photos. Machine dimensions (LxWxH): approx. 5000 x 1400 x 1550 mm Weight: approx. 1550 kg The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse, see “more offers from this seller.”