Vakum pengangkat dengan pilar jib crane

Barbaric Uniwood B3 90 - 250 + SSK 250

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800 rpm. An on-site inspection is possible. Redpswu Ez Njfx Apcew

Kondisi: baru, Tahun pembuatan: 2026, Build size: 6 Nominal heat output: 170 kW -- Complies with 2nd BImSchV and CE -- Combustion chamber fully lined with fireclay For spaces up to: 4,800 m³ (according to DIN) Fuel types: Firewood, chipboard, wood chips, wood briquettes Fuel consumption: 40–50 kg/h Rodpjdlhdbefx Apcsw Fan air volume, free blowing: 14,000 m³/h Discharge opening: Ø 700 mm Flue gas outlet connection: Ø 220 mm Weight: 2,150 kg PLC control cabinet: 380 Volt

Kondisi: baru, BARBARIC B3 Vacuum Lifter, Pivotable, incl. Crane - Exhibition Unit - Includes: - BARBARIC uniWood UWL 3 Vacuum Lifter, 150 kg capacity Vertical and horizontal transport of flat, standard commercial panels (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - 90° tilting range with pneumatic tilting mechanism - Complete configuration with hoist and corresponding safety features (vacuum gauge and hand slide valve with mechanical lock) - uniWood traverse with 2 suction cups Ø 270 mm on an adjustable beam (Beam length: 1,500 mm) Includes: - Reinforced version option BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction cups 500 x 250 mm on an adjustable beam (Beam length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version enables lifting materials up to 250 kg. Includes: - Comfort operation option BARBARIC uniWood All controls for the hoisting gear and vacuum lifter are integrated into a single control unit – our special handling grip. This allows single-handed operating of the system and guiding of the load. The lifting process can be infinitely controlled by frequency inverter. In the comfort configuration, complete with hoist and corresponding safety systems (vacuum gauge and 2-button safety operation for load release). Includes: - BARBARIC Column-Mounted Pivot Crane Load capacity at lifting device: 250 kg The stated capacity refers to the working load at the lifting device. Barbaric pivot cranes are designed for handling tasks in all application areas and are extremely lightweight. The kit consists of column, console, and low-friction jib. Pivoting and trolley traverse are done manually. Prerequisite for installation is a suitably rated concrete floor (C20/R5, at least 20 cm thick). Rsdpfx Aou R Szaopcsw Structural verification of the floor is the responsibility of the customer and must be documented accordingly. For installation on cracked concrete or weak subsoil, we can provide larger base plates on request. Fixing: Supplied with adhesive anchor for concrete floor. If ordered without lifting device, please specify cable or hose feed requirements! Delivery includes: trolley, energy supply system, and compressed air connection. - New exhibition machine -

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, en-GB Redodqzcxopfx Apcsw

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Schiavo Hydro 3000.6 Rjdpfx Apswd N Urjcew Vertical glass washing machine with pre-wash zone, main wash zone, and drying zone. Wet section predominantly made of stainless steel and moisture-resistant materials. 150 mm one-piece washing brushes with stainless steel core. Including water tanks for water treatment. Including fans for glass drying. Discharge section with inspection lamps. Processing dimensions: Max. glass height: 3000 mm Glass thickness: 3–22 mm Brushes: 6 pieces Connected load: 22 kW

Kondisi: bekas, LOSER chamfering machine / dowel trimmer model AA220 - USED - Capacity: 7500/1500 dowels per hour - Dowel diameter capacity: 6-18 mm. Rsdpfx Apeqpdkcecew

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: MBHF-KBK1, DEMAG KBK crane system, crane runway approx. 12m x 3.5m Other dimensions available on request! Load capacity / lifting capacity: 125 kg (0.125 t) Technical details of the system: - Crane runway made from Demag KBK1 sections - System is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, power supply, brackets/hangers, etc. - Includes 1 bridge with Demag DC-COM chain hoist (125 kg capacity) The crane is disassembled and available immediately. Very good used condition, see pictures. Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only. Demag KBK1, KBK2, and KBK3 rails in stock! Rodpfspiarnox Apcow Other KBK systems available. Load capacities from 125 kg up to 1600 kg. Please inquire about your crane runway requirements, including jib load and dimensions.

Tahun pembuatan: 2001, Kondisi: hampir baru (bekas), Dual-aggregate sander, two lower aggregates, each with 2 x 7.5 kW main power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished; the conveyor belt is in very good condition. Fitted with a new graphite pad. The machine features two bottom-mounted aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width: 630 mm. Two feed speeds: slow and fast. Sanding belt length: 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt feed speed: 9/20 m/min. Number of sanding pads: 1. CE conformity declaration. Rated total power: 21 kW. Max working height: 160 mm. The machine is equipped with two lower working rollers. Conveyor belt with upper feed system. Redpfxsfxpbmo Apcew

Kondisi: baru, Typ SK-1000-P6 Arbeitsbreite: 1000 mm Minimale Werkstücklänge: 500 mm Rsdpfx Apsdmi Nijcew Arbeitshöhe/-dicke: 2–150 mm Polierwalzendrehzahl: frequenzgeregelt Vorschubgeschwindigkeit: 3–12,5 m/min Gesamtanschlussleistung: 13,87 kW Scheibenmotor: 1,5 kW × 1 Queraggregatmotor: 1,5 kW × 1 Schraubenwalzenmotor: 2,2 kW × 2 Vorschubantrieb: 2,2 kW Motor für Auf-/Abbewegung: 0,37 kW × 4 Schwenkmotor: 0,37 kW × 2 Arbeitstisch höhenverstellbar: 0,55 kW Transportabmessungen: 3650 × 1850 × 2100 mm Gewicht: 4200 kg

Kondisi: belum diuji (bekas), Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Used Weinig Unicontrol 6 window manufacturing line ----- For sale on behalf of a customer Manufacturer's description: For the production of individual components, elements, and small batches. Spindle arrangement: One cross-cut saw, one single-sided tenoning and slot spindle, one right-hand profiling spindle, one tenoning-slot spindle, and one profiling spindle suitable for stacking multiple tools on top of each other, equipped with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer into the continuous, chainless rubber roller feed of the profiling unit, feed height adjustment is manual. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for frame or sash outer dimension. Position control of the tools (longitudinal and cross machining) via rotary selector switch from the control panel. Technical specifications ----- Cross-Cut Saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Maximum tool diameter: 350 mm Motor: 3 kW Tenoning and slot spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 - IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 - IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 232 mm Motor: 11 kW Special equipment: Co-rotating spindle ----- Pneumatically actuated for splinter-free rebating of window sashes, frames, and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, tool zero diameter: 112-140 mm, Maximum tool diameter: 232 mm, spindle speed: 6,000 rpm Motor upgrade for co-rotating spindle from 4 kW to 7.5 kW Monitor-based control for 99 window types, 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame mode, series mode, rebating. Data entry via keypad with integrated operator guidance and fault diagnosis. Rsdpfx Apox Tu N Hecew 1 grooving spindle from above ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with keyway 10 x 4 mm Clamping length: 13 mm Clamping length: 40 mm Axial positions: 2 Radial positions: 2 Max. tool diameter: 130 mm Motor upgrade for grooving spindle from 2.2 to 3 kW 1 hardware milling unit, right: ----- For routing the hardware groove during rebating or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on control panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool circle diameter: min. 140 mm, max. 180 mm Home position under table surface: 10 mm Hardware router in special design: Clamping length: 150 mm Axial stroke: 80 mm, 3 positions 3 tools Radial positions: 2 Motor upgrade for hardware milling spindle from 2.2 to 3 kW Hardware milling spindle for 230 mm tool diameter both in and above the table Electric height adjustment of the feed with selector switch on the control panel for 2 wood dimensions, including...