Pers eksentrik

BBT Pressen E 15

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Itjdjuz If Nepfx Apask Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: bekas, rollensaetze-herkuleswetzlar Iodpfx Ajglaq Ijpastk

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut: 300 kg, Rotary Welding Table KT 300 Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilt range: stepless adjustment via hand-crank gear motor, 0 - 90° Iedpfx Aoc Ug Tlepaotk Rotation speed: 0.3 to 2.5 rpm Including foot remote control Surcharge: Quick-release chuck Diameter: 300 mm, €450

Kondisi: bekas, Tahun pembuatan: 1988, en-technical-details Technical Details: Pressure: 10 t Workpiece diameter - max.: 40 mm Thread length: 70-80 mm Workpiece diameter min./max.: 3 / 40 mm Spindle speeds: 47-94 rpm Feed rate: 0.5 - 6 mm/s Stroke: max. 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions: 1.4 x 1.4 x 1.7 (W x D x H) m Hydraulic unit dimensions: 0.8 x 1.2 m Hydraulic drive manual and automatic cycle Itsdpjw D Aq Tsfx Apaok adjustable roller speed max. thread diameter 40 mm, min. thread diameter 3 mm up to 3.5 mm pitch, max. pitch 1.75 mm Roll width min. 80 mm, max. 120 mm Shaft speed 47-94 rpm Roller shaft diameter 40 mm various rollers as accessories

Tahun pembuatan: 1990, Kondisi: bekas, Press force: 80 t Throat depth: 250 mm Stroke: 5–95 mm Table area: 805 x 510 mm Distance table/ram (stroke bottom): 400 mm Ram bore: 45 mm Ram adjustment: 100 mm Ram area: 360 x 300 mm Strokes per minute: 55 Total power requirement: 5.5 kW Machine weight approx.: 4 t Space requirement approx.: 0.83 x 1.7 x 2.6 m Iedpfx Apsfn Aqnsaetk - Ram weight compensation Machine will be partially overhauled in our facility next year (dismantling, inspection, new painting, new wiring, new control cabinet)

Kondisi: siap digunakan (bekas), An automated tube bending system with two Wafios bending heads and a Kuka Twister robot is available. 1) Wafios RB20 bending head, bending direction: left and right, maximum total tool height: 78 mm, bending force: 360 Nm, bending speed: 560°/s, bending radius: 57 mm, repeat accuracy for bending, rotation, and feed: +/-0.05 mm. 2) Kuka KR 16-2 KRC 2 robot, axes: 6, payload: 16 kg, maximum reach: 1611 mm, repeat accuracy: +/-0.05 mm, weight: approx. 235 kg. Includes overhead magazine, Kuka control cabinet, discharge conveyor, safety fence, mobile operator panel, docking station, and work table. Documentation available. On-site inspection is possible. Itjdpfxjwwlkis Apaok

Tahun pembuatan: 1980, Kondisi: baik (bekas), nomor mesin/kendaraan: 3253-80, Offer 22045 Technical data (approx.): - Pressing force: 10 t - Throat depth: 150 mm - Table size: 520 x 320 mm Itsdpfxjktg Dhj Apajk - Table height adjustment: 160 mm - Table through hole: 165 x 125 mm - Max. daylight (installation height): 220 mm - Ram area: 240 x 150 mm - Ram bore (taper hole): 30 mm - Ram adjustability: 40 mm - Stroke adjustment: 4 - 60 mm - Strokes per minute: 130 1/min - Hydraulically actuated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive: 380 V / 1.1 kW - Required floor space (approx.): W 1000 x H 1800 x D 1100 mm - Weight (approx.): 1300 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Max. bar diameter 65 mm Itedpfxjin Hkmo Apaok Max. bar length 3000 mm

Kondisi: bekas, Tahun pembuatan: 1961, Pressure 25 t Outreach 200 mm Stroke 4 - 80 mm Table clamping surface 595 x 410 mm Itedpfetqqxbox Apaok Ram adjustment 70 mm Strokes per minute 150 Table height adjustment 240 mm Total power requirement 1.1 kW Machine weight approx. 1.45 t Machine dimensions (L x W x H) 1.30 x 0.80 x 2.0 m

Kondisi: baik (bekas), Tahun pembuatan: 1986, Single-column eccentric press, single-column press, automatic punching press, single-column eccentric press, eccentric press, single-column press - Manufacturer: Heilbronn, Single-column eccentric press type NEPD 50 - Pressing force: 50 t - Clutch: pneumatic - Stroke: adjustable 8 – 100 mm - Table size: 500 x 650 mm - Table cut-out: Ø 240/100 mm Itsdoi Agynspfx Apaok - Throat depth: 255 mm - Punch holder: Ø 40 mm - Insertion height: 355 mm - Dimensions: 1800/1080/H2260 mm - Weight: 3050 kg