Potong melintang memotong melihat UTK 350

Beck Maschinenbau GmbH UTK 350

Kondisi: bekas, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – The Semi-automatic Under-table Cross-cut Saw ----- Maximum cutting area: 220x125 / 260x100 / 285x80 / 310x50 mm. When cutting stacked boards, maximum height: 100 mm. The structure is made entirely of thick-walled, fully reinforced and painted steel. Solid floor mounting system with flanged steel feet for the fixing hole. Two-handed safety cutting control in ergonomic position. Saw motor power: 5.5 kW. Adjustable cutting speed via a pneumatic regulator. Maximum system for weight balance and durability. Shock-absorbing system. Independent pneumatic adjustment options for adaptation to various processing types. Durable and easily replaceable saw blade adjustment bar. Carbide-tipped circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece hold-down with electro-pneumatic control. Press movement system via innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. CE models must, as standard, be equipped with at least 1 meter long feed tables/roller conveyors at both the infeed and outfeed sides. Technical Data: ----- Maximum saw cross-section, mm: 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Iajdpov Uq Tlsfx Afier Saw blade rotational speed: 2800 rpm Air consumption per cycle: 5 Nl Suction connections: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400V/50 Hz, 3-phase Working table height: 900 mm ± 20 mm Colour: RAL 7035 Machine additionally equipped with: ----- 2 m roller conveyor (right of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. The spaces between rollers are enclosed with painted steel. Including side guide. 2 m roller conveyor (left of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. The spaces between rollers are enclosed with painted steel. Including side guide, stop guide and millimeter scale. 2 heavy-duty pneumatic stops, width 200 mm ----- Total price ex-works: on request! ----- Image and video not original, show an identical model. Further options such as longer infeed/outfeed, stop systems available on request! (Technical data according to manufacturer, subject to change!)

Kondisi: baru, Tahun pembuatan: 2025, EN-001 Iaedpfspq If Djx Afisr

Kondisi: baru, Tahun pembuatan: 2025,

Kondisi: bekas, omga-t55-300-2009 Iodexvh E Rjpfx Afioar

Tahun pembuatan: 2024, Kondisi: baru, This CNC milling machine is an excellent tool to take your hobby to the next level. The 0404 mini is both practical and compact, making it suitable for any workshop. The Wattsan benchtop milling machine can process wood, plastics, acrylic glass, aluminium, brass, and more. Isdpfsiinkkex Afisar The cast iron frame of the Wattsan 0404 mini ensures precision and stability for all types of demanding tasks. It can perform 3D milling. Our CNC milling machine features a T-slot table, allowing you to secure workpieces using screws, clamps, or mechanical retention devices. You can contact our managers for further details! Wattsan 0404 mini highlights: - Working area: 400 x 400 mm - Spindle: 1.5 kW - Machine dimensions: 710 x 710 x 740 mm - Packaging size: 860 x 860 x 810 mm - Weight: 155 kg Virmer not only offers top-quality machines but also provides service and delivery. Our engineers and managers are ready to answer all your questions and, if needed, provide remote video support. Additionally, owners of Wattsan equipment receive lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official supplier of Wattsan. We supply not only laser engravers but also metal cutters, welding machines, marking and cleaning systems. Wattsan is a Chinese manufacturer producing laser equipment for nearly 15 years and continues to evolve with the help of its customers. Thanks to user feedback, Wattsan has implemented over 50 upgrades that have made the machines more reliable, accurate, and powerful, enabling you to take your business to a new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR REQUIREMENTS If you are looking for the right laser or CNC milling machine, we are happy to assist you. You will find a wide selection of laser machines and equipment with us: CO2 laser machines; metal laser cutters; fiber metal lasers; fiber laser engraving machines; CNC metal milling machines; wood milling machines; CNC milling machines; laser engraving machines; laser engravers; laser cutting machines for plywood; laser cutting machines for metal; CNC milling machines; laser markers; lenses; chillers; machine cooling systems; S&A chillers; IPG Laser, MAX Photonics, Raycus; compressors; rotary devices; mirrors for laser machines.

Kondisi: bekas, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control system: Yes Weight: 3300 kg Dimensions (L/W/H): 2600 x 920 x 1890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine with top/bottom disc unit Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, e.g. window scantlings etc. Robust premium design with innovative features. Suitable for high-duty cycles even with higher material removal rates. - Consecutively arranged sanding units for pre-sanding, fine sanding, and finish sanding, each from above and below 1st belt sanding unit with heavy-duty steel roller 2nd belt sanding unit with rubber-coated roller and shoe 3rd finishing unit with fiber brush (see special accessories below) - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free, wear-free CERMET-coated sanding shoes with excellent thermal conductivity and dimensional stability - External cooling of the sanding zones for cooler grinding and longer belt life - Forced pneumatic controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Dust extraction for airborne dust at tension rollers - Integrated brushing and finishing units with large dust extraction device - Motorized sanding thickness adjustment via precision ball screws and generously dimensioned linear ball bearings on hardened and ground precision shafts with dust and dirt protection - Material removal setting below via precision spindle with scale ring display (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure - Quick sanding belt change via pneumatic belt release in seconds - Adjustable sanding belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed protection via contact roller for over-thick workpieces - Workpiece transport via calibrated, non-slip and adhesive transport belts over heavy cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Universal joint drive shaft for smooth, even workpiece transport - Feed gear motor with stepless speed control, 4–20 m/min - All motors electrically protected - Ergonomically arranged control elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four braking motors for drive: 5.5 kW Iaodpevu Hgbofx Afior - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm, 0.37 kW each - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2,740 mm): 2,600 mm - Length with control panel (with soft disc 3,035 mm): 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air jet for 4-belt system via nozzles directly at the radii ...

Kondisi: bekas, Tahun pembuatan: 2023, Double Glazing Bead Saw TRF 527 VIS CE 1 unit DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned on top of each other. The right saw unit is fixed, the left unit is adjustable; the set cutting length can be read from a digital display. Both units are equipped with supports, enabling the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process, the pneumatic clamping cylinders automatically swivel out of the way to simplify loading and unloading of the machine. STANDARD EQUIPMENT - Fixed right-hand aggregate - Digital measurement display - Pressure switch - 2 carbide-tipped saw blades - Electrical system with motor brake, undervoltage release, motor protection switch - Pressure switch - Tool kit - Safety devices with horizontal, swiveling clamping system - Two-hand operation - Belt drive - Pneumatic aggregate lift - Central support TECHNICAL DATA - Motor power: 2 x 1.2 kW - Saw blade diameter: Ø 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90°: 55 mm - Max. cutting width at 45°: 40 mm - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm - Weight: 217 kg - Space requirements (standard configuration): 3,000 x 850 mm Iajdpfxoxnlgco Afior Extended cutting capacity: 1 unit Max. cutting length: 4,000 mm Star stop with four positions: 1 unit Set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 unit Adaptations for rebated profiles: 1 unit Adaptations for rebated profiles as per drawing: - Fitting on the clamping devices to compensate for the profile inclination - Inserts on the rear stops of the saw units and on the central support In the sketch below (in green), a beveled pressure piece is shown, following the inclined profile and pressing it against the (red) insert at the stop. Location: Garbsen

Kondisi: siap digunakan (bekas), Panel length: 3200 mm, panel width: 1000 mm, max. workpiece thickness: 38 mm, min. infeed length: 500 mm. Isdpfom Habdjx Afisar

Kondisi: baru, Tahun pembuatan: 2025, The SQUALO 515 single-shaft multi-blade or multi-rip circular saw, in the LM version, is distinguished by its advanced mobile blade system. The machine is equipped with motorized feed rollers on the worktable and top motorized pressure rollers, ensuring effective all-wheel drive for precise and consistent material transport. Iodpehpbxiefx Afijar In the LM (Mobile Blades) configuration, the cutting unit consists of one fixed blade and a variable number of one to three mobile blades. These mobile blades can be dynamically positioned to accommodate various trimming and multiple cutting requirements. A distinctive feature of this model is the possibility to expand its cutting capacity: by using special spacers, the number of blades used simultaneously can be increased up to six. It is important to note that the blades mounted on these special spacers operate at a predetermined fixed distance, allowing for the efficient production of components with standardized widths. This versatility enables the machine to seamlessly switch from operations requiring flexible blade positioning to serial production with fixed cutting intervals.

Tahun pembuatan: 2023, Kondisi: baru, Complete solution for transporting bulk materials such as wood chips, pellets, shredded material, granules, etc. Aluminum angle conveyor belt including support frame Horizontal section: 1,500 mm (customizable) Inclined section: 3,000 mm (customizable) Angle at bend infinitely adjustable Ijdek S Dw Ejpfx Afioar Loading height: horizontal area (customizable) Discharge height: individually adjustable Construction: height-adjustable (mobile) Conveyor belt width: 600 mm (customizable) We supply our conveyor belts in PVC, PU, felt, or rubber. We always have various systems of this type in stock. Delivery time for a custom system is currently about 3-4 weeks, depending on manufacturing requirements. Our core competency is delivering exactly what our customers truly need. We work together with our customers to develop tailored, application-specific solutions and supply the corresponding systems from our own production. Feel free to contact us by phone as well to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic tape separator