Band Saw horisontal - otomatis-
BERG & SCHMID GBS 255 VA-I MPS

Name: BERG & SCHMID GBS 255 VA-I MPS
Brand: BERG & SCHMID
Availability: InStock

Kondisi

Baru

Lokasi

Jerman

Band Saw horisontal - otomatis- BERG & SCHMID GBS 255 VA-I MPS

Data mesin

Nama mesin:: Band Saw horisontal - otomatis-

Pabrikan:: BERG & SCHMID

Model:: GBS 255 VA-I MPS

Kondisi:: baru

Harga & Lokasi

Lokasi:: Deutschland

Hubungi

Rincian penawaran

ID iklan:: A4005270

Nomor referensi:: 1108-66217

Pembaruan:: terakhir pada 10.04.2026

Deskripsi

Cutting capacity at 90°: round 255 mm
Cutting capacity at 90°: square 240 mm
Cutting capacity at 90°: rectangle 300 x 180 mm
Saw blade length 2,765 x 27 x 0.9 mm
Table height 870 mm
Blade speed 18 - 110 m/min
Total power requirement 1.5/1.8 kW
Machine weight approx. 0.63 t
Space requirement approx. 1.8 x 1.85 x 1.85 m
Mitre band saw, fully automatic, GBS 250 Super VA-I MPS
Bdedped Iip Ajfx Afpog
• Mitre left 45°, automatic operation
• Mitre left 60°, semi-automatic operation
(Cuts without programming)
• Impact-resistant and ergonomic control panel
with oil-resistant EPDM cover
• Material height sensor
(Automatic cut start detection)
• Frame and gearbox cast in one piece,
very quiet operation and very low vibration
• Removable chip tray (for cleaning/disinfection)
• Top access to saw, material, and feed unit
• Foldable safety cover
• Fine adjustment of feed
• Semi-automatic cut!

Automatic sawing with microprocessor control
Configurable for 2 program levels
Semi-automatic operation
Fully automatic operation
Start after entering the desired quantity and length: material positioning,
cut execution and piece counting until the program is complete
• MPS control for entering the required feed quantity
• The LED display shows all essential machine data during
cutting operation (current consumption, cutting time, quantity)
• Entered data are stored in RAM memory
• The self-diagnostic circuit automatically displays any
irregularities as an error message and monitors the complete process
• Feed unit mounted on floating bearings
• Length adjustment via handwheel and vernier scale with mechanical position indicator
Adjustable for cut lengths from 2.5 mm to 420 mm, or via
reversing automation repeatable 1 – 29 times, remnant length 210 mm

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2003

790 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 2863 ... iklan

Faks:

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Alat pemotong plasma Hypertherm Powermax800

Wymysłów

10.472 km

Alat pemotong plasma
HyperthermPowermax800

€1.127

Harga tetap ditambah PPN

Hubungi

Kondisi: sangat baik (bekas), For sale: Hypertherm Powermax 800 plasma cutter in very good condition. /////Price listed per unit///// Hypertherm Powermax 800 Plasma Cutter Bjdpfx Afsulc Ixepsdg Plasma Cutter Description: The Powermax800 plasma cutting system utilizes an inverter power supply to provide smooth DC output voltage, ensuring excellent cutting and gouging quality on mild steel, stainless steel, aluminum, and other metals. The Powermax800 power supply delivers a variable, constant output current from 20 to 50 amps, offering optimal performance across all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and sever metals up to 1 inch (25 mm) thick.

Lihat detail

Iklan kecil

Otomatis circular saw KASTO GKS 400 AU/1200 CNC

Wiesbaden

11.201 km

Otomatis circular saw
KASTOGKS 400 AU/1200 CNC

Hubungi

Tahun pembuatan: 1988, Kondisi: bekas, nomor mesin/kendaraan: 103.071.3156.78192, Saw blade diameter: 400 and 425 mm Cutting capacity at 90° round: 130 mm Cutting capacity at 90° square: 120 x 120 mm Mitre cutting capacity at 45° round: 130 mm Mitre cutting capacity at 45° square: 110 x 110 mm Cutting speeds: 11 and 22 m/min Feed rates: 670 mm/min Cut length: with automatic feed up to 1200 mm Electrical connection: 380 V, approx. 4 kVA Saw drive: 1.6/2.5 kW Space requirement: 1800 x 3800 x 2000 mm Bdsdpfx Afoz N Amopjg Weight: approx. 1800 kg

Lihat detail

Iklan kecil

Alat Rem Tekan untuk Trumpf Cnstamp 86 degree H256mm Trumpf Punch

Nanjing

3.648 km

Alat Rem Tekan untuk Trumpf
Cnstamp86 degree H256mm Trumpf Punch

Hubungi

Iklan kecil

DMG MORI CTX Beta 800 4a DMG MORI CTX Beta 800 4a

Jerman

11.248 km

DMG MORI CTX Beta 800 4a
DMG MORICTX Beta 800 4a

Hubungi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 48.973 h, produsen pengendali: SIEMENS, model controller: 840 D, jumlah sumbu: 3, DMG MORI CTX Beta 800 4a ini diproduksi pada tahun 2014. Mesin ini dilengkapi dengan kontrol Siemens 840 D, spindel ganda, dan paket pemesinan batang untuk fleksibilitas yang lebih besar. Mesin ini dilengkapi dengan sistem pendingin 980 liter dan konveyor lipat untuk pengoperasian yang efisien. Jika Anda mencari fungsi pembubutan dan pemesinan berkualitas tinggi, Anda harus mempertimbangkan mesin DMG MORI CTX Beta 800 4a yang kami tawarkan untuk dijual. Mesin ini berada di Jerman. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. • 2 × 16 posisi Sauter-Stern VID 30 • Siemens 840 D • Pembubutan dan pemesinan eksentrik • TC dengan kecepatan putar yang dapat diubah • Spindel ganda • Skala kaca Y1, Z1, Z2, Z3, X1, X2, X3 Peralatan tambahan Bdsdpfx Aox D Nd Defpsg • 980 liter cairan pendingin dengan 8 bar/20 l dan 20 bar/40 l, diprogram melalui fungsi M • Filter pita Pater • Perangkat pembilasan chuck untuk sisi luar utama • Perangkat pembilasan chuck untuk sisi ganda • Pistol semprot cairan pendingin • Konveyor engsel • Sistem pemesinan batang • Pembersihan jendela dengan udara bertekanan • Paket SK untuk pemesinan aluminium • Detektor patah pahat Artis CTM

Lihat detail

Iklan kecil

Mesin tekuk tabung, mesin tekuk mandrel Jutec Biegesysteme GmbH & Co. KG Biegesystem KBV

Limburg an der Lahn

11.204 km

Mesin tekuk tabung, mesin tekuk mandrel
Jutec Biegesysteme GmbH & Co. KGBiegesystem KBV

Hubungi

Kondisi: baru, Tahun pembuatan: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vise. Operation is carried out via a screw-in handle. A lockable setting ring ensures repeatable bending accuracy. Tool exchange is exceptionally simple due to the plug-in system. The principle of “stationary pipe and rotating tool” allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, enabling the production of bends with minimal deformation, e.g. for stainless steel and copper pipes. The optional model with hexagonal drive facilitates not only use in a vise, but also allows the bending device to be powered by the 3000 and 6000 systems. For this, the KBV is simply mounted onto the machine’s bending shaft. POSSIBLE APPLICATION AREAS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limitation • Maximum bending angle of 180º OPTIONAL ACCESSORIES: • KBV with hex drive for bending on model 3000 or 6000 • Machine case • Length stop OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our demo room Bdjdpfxjng Amks Afpeg • Consultation and information meeting at your premises • Consulting and processing of leasing/financing purchases via JUTEC • Trade-in of your current machine • Service contracts, maintenance on-site at your location

Lihat detail

Iklan kecil

Sodick SL400G (2015) mesin pemotong kawat (hanya 4.355 jam!) Sodick SL400G

Trenčianske Stankovce

10.519 km

Sodick SL400G (2015) mesin pemotong kawat (hanya 4.355 jam!)
SodickSL400G

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Machine model: ALC400G Max. workpiece dimensions (W×D×H): 600 × 470 × 240 mm (Flushing) Max. workpiece dimensions (W×D×H): 600 × 470 × 230 mm (Submerged) Max. workpiece weight: 500 kg (Flushing) Max. workpiece weight: 350 kg (Submerged) Working tank dimensions (W×D): 850 × 610 mm X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 250 mm U-axis travel: 150 mm V-axis travel: 150 mm Taper angle (on workpiece, thickness 130 mm): ±25° Wire diameter: Ø0.1 – Ø0.3 mm Maximum wire feed speed: 420 mm/s Wire tension: 3 – 23 N Machining method: Flushing / Immersion Distance from floor to table top: 995 mm Wire spool weight: 8 kg Machine dimensions (W×D×H): 2,115 × 2,500 × 2,230 mm Installation space (W×D): 3,350 × 3,850 mm Machine weight (incl. power supply): 3,400 kg Air pressure: 0.5 MPa Air consumption: 30 NL/min Total power consumption: 3-phase, 50/60 Hz, 13 kVA External dimensions of dielectric tank (W×D): 700 × 2,155 mm Bdodpoyu Nqmjfx Afpog Weight of dielectric tank (empty): 450 kg Dielectric tank capacity: 675 liters Dielectric fluid filtration method: 3 interchangeable paper filters (internal pressure type) Deioniser: Ion exchange resin (Type 18 L)

Lihat detail

Iklan kecil

Bühl

11.236 km

Mesin bor radial
MASVO 50

Hubungi

Kondisi: bekas, Tahun pembuatan: 1991, Drilling capacity in steel (diameter): 50 mm Throat depth: 1100 mm Workpiece height – max.: approx. 1000 mm Drilling capacity in cast iron: 60 mm Bjdpfx Afou Sblwopjdg Spindle taper: MT 5 Spindle speeds: 28 – 2500 rpm Feeds: 0.05 – 2 mm/rev Quill stroke: 300 mm Distance base plate – spindle nose: 630 – 1380 mm Column arm vertical adjustment: 750 mm Total power requirement: 6 kW Machine weight: approx. 4 t Machine dimensions (L x W x H): 2,740 x 1,140 x 2,590 mm - with threading unit - Accessories: cube table (L x W x H): 550 x 550 x 550 mm, machine vice, coolant system

Lihat detail

Iklan kecil

Mesin bubut tipe Swiss CNC TORNOS GAMMA 20/5

Contamine-sur-Arve

11.428 km

Mesin bubut tipe Swiss CNC
TORNOSGAMMA 20/5

Hubungi

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 210 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° - Number of tool holders: 2 TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 2 - Driven tool speed: 8,000 rpm FRONT TOOLPOST - Number of positions: 5 BACK WORKING STATION - Number of positions: 4 - Number of driven positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Spindle hours: 18,849 h ACCESSORIES - CNC control: Fanuc 31i-model A - Driven tool motorization at: S11, S21, S51 - Driven guide bushing - Parts catcher - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank * With high-pressure pump: 20 bar Bdsdpfx Afouha Nwepog - Bar feeder: TORNOS SBF320 - Electrical transformer - Number of driven tool holders: 5 - Double drilling/milling tool holder: 1

Lihat detail

Iklan kecil

Burbach

11.195 km

Pabrik kecil dengan robot Qirox
Cloos

Hubungi

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas), Cloos welding robot Qirox QRC 320 incl. V6 control unit, base pedestal for upright installation, Cloos welding machine Quinto II 603 (600 A), wire feeder, welding torch, torch hose package, mechanical cleaning, pressure booster 1 rotary-tilt table WPK 5000, load capacity 500 kg, 1 job selection panel, 1 control unit for customer-supplied sliding door Bsdpfxoizwv Ne Afpedg gas nozzle sensor, arc seam tracking, point editor The system will be completely overhauled and serviced before delivery. A second station with an additional, identical rotary-tilt table is possible.

Lihat detail

Iklan kecil

Pusat Pembubutan dan Penggilingan CNC Mori Seiki NLX2500SY

Thurmaston

11.744 km

Pusat Pembubutan dan Penggilingan CNC
Mori SeikiNLX2500SY

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Ayunan di atas dudukan melintang 360mm, Diameter pemotongan maksimum 366mm, Panjang pemotongan maksimum 705mm, Kapasitas batang 80mm, Kecepatan spindle 4.000 rpm, Kecepatan milling 10.000 rpm, Bdodsx Eituepfx Afpsg Daya spindle utama 18,5 kW, Sumbu C 0,001 derajat, Sumbu Y -/+ 50mm, Turret 12 posisi. Mori Control M730BM, dilengkapi dengan Toolsetter, konveyor serbuk, chuck rahang 3, penangkap benda kerja, unit barfeed.

Lihat detail

Beriklan di sini