Beli Mesin lipat tepi otomatis bekas (11)

Kondisi: bekas, Number of spindles: 3 pcs. Number of tool sets: 1.3/4.1 pcs. Spindle diameter: 50, 40 mm Spindle length: 120, 320, 125 mm Weight: 2,500 kg Loading dimensions (L x W x H): 3,800 x 1,400 x 2,000 mm Table length: 3,470 mm Weinig Univar 6 P For sale on behalf of client ----- Operating voltage: 380 Volts, 50 Hz. For re-profiling windows, doors and similar objects with profiles that are not symmetrical all around. Arrangement of units: 1. Climb-cutting spindle, right, pneumatically actuated. 2. Profiling spindle, right 3. Fitting spindle The profiling spindle is suitable for accommodating several tools stacked above each other. Spindle movement is pneumatic. For tear-free re-profiling, the first spindle operates in climb-cut mode. The last 100 mm of each frame end is machined by dipping this spindle with the appropriate tool into the wood to avoid tear-out at the frame corners. Machine frame, tables, fences: Machine body constructed from heavy, torsion-free and vibration-damping elements. Right-hand stops in the profiling area are made of Pertinax. In front of the profiling spindle, a split stop with sliding bar for short parts. Additional support rail for large-format frames. Feed system: Continuous, chainless feed system equipped with rubber rollers. Air-blast device for feed rollers and table. Spindles, hood: Spindles feature high concentricity and are dynamically balanced. Extraction hoods are designed for optimal chip evacuation. Quick tool change due to easy-to-open hood covers. Machine operation, setup aids: Machine operated from the front. Adjustment of the stops to the tool diameter is via mechanical digital readout. Machine electrics, motors, control: Electrical configuration according to DIN VDE 0113 – Electrical Equipment of Industrial Machines EN 60204 IEC 204-1. Other electrical standards are not considered. Motors are dynamically balanced. Podpfoxpi Elsx Ab Ierd Tool position selected via rotary switch on the control panel. Tools: The machine is supplied with operating tools but without machining tools. SPINDLE 1 Climb-cutting spindle Number of tools: 1 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 120 mm Max. tool diameter (re-profiling): 232 mm Tool base circle: 112–140 mm Basic position below table: 10 mm Motor power: 4 kW (5.5 kW) SPINDLE 2 Number of tools: 4 Vertical spindle stroke: 3 x 80 mm = 4 tools optionally switchable to 2 x 95 mm = 3 tools Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Feed profiling unit: 8 m/min Feed roller width: 50 mm / 35 mm Feed roller diameter: 95 mm Fence height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100 mm Workpiece length without tenons: min. 245 mm Max. tool diameter: With base circle 112 mm: 210 mm With base circle 140 mm: 232 mm Max. tool diameter (re-profiling): 232 mm Tool base circle: 112–140 mm Basic position below table: 10/5 mm Motor power: spindle: 11 kW; feed: 1.1 kW Feed of profiling unit: stepless 6–12 m/min Feed roller width: 50 mm Feed roller diameter: 95 mm Fence height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100 mm Workpiece length without tenons: min. 245 mm Special equipment: 3 mechanical spindle br...

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), I am selling a complete window manufacturing set: - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profiling and overlay centre Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI - Available immediately - Total price: 17,000 EUR Prodefzzhyspfx Ab Iod - Condition: very good

Kondisi: baik (bekas), Tahun pembuatan: 1995, Corner system for window production, consisting of: Slotting unit for 8 tools with a hydraulic stroke of 75 mm (clamping height 600 mm) Milling unit for 4 tools with a hydraulic stroke of 80 mm (clamping height 320 mm) with return feed with IV 68 tooling Psdpfxstqft Is Ab Iord

Kondisi: bekas, For profiling and contour milling of windows, doors, individual parts, and similar items with continuous profiles. Units (Aggregates): 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic, with synchronizing device Pedpfx Abjvnab Ss Ierd 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic 3. Profile milling unit, vertically positioned on the right, with two radial and three axial indexing positions, motor: 3 kW 4. Profile milling unit, horizontally positioned below, with two radial and two axial indexing positions, motor: 3 kW Contouring carriage for narrow and short sashes, PC control system Nexus.

Tahun pembuatan: 1987, Kondisi: sangat baik (bekas), Automatic turning machine Pjdpfsf Upzhex Ab Ijrd WEINIG UNIVAR 10

Kondisi: bekas, Number of spindles: 4 pcs Number of tool sets: 11 pcs Spindle diameter: 50, 40 mm Spindle length: 285, 125 mm Length: 4000 mm Width: 2000 mm Height: 2200 mm Weinig Univar 10/3 Rebate Machining Center --- For rebating windows, doors, and similar workpieces with asymmetrical, continuous profiles. Machine suitable for timber thicknesses from 68 to 92 mm. Cycle time for rebating a frame of medium size 1.20 x 1.20 m: approx. 2 minutes. The available tool positions are selected via a selector switch on the operator panel. Machine equipped with 3 hydraulically operated right-hand precision lifting spindles for holding 3 tool sets, with spindle stroke: 2 x 95 mm per spindle. The spindle stroke is performed in a U-motion, keeping the opening in the fence as small as possible for short workpieces. Horizontal stroke adjustment is finely controllable for both tool positions from the operator side. Central lubrication system for the spindle units. For tear-free rebating of window sashes, frames, or doors, the first spindle can be switched to right or left rotation. For the last 100 mm of each frame end, this spindle with the corresponding tool in climb cut mode plunges into the passing timber. This prevents tear-out from the following profile spindle, which operates in counter-rotation. Lifting of the first 7 feed rollers via foot switch. This reduces throughput time. An additional support rail allows rebating of large-format frames as well. Continuous, chainless rubber roller feed with extremely short roller spacing. Height adjustment for the feed beam can be displayed electronically. Electrical design according to VDE standards. Machine supplied with operator tools, but without machining tools. Technical Data: Minimum working width: 40 mm Minimum/maximum working height: 30 mm / 100 mm 1st profiling spindle (climb and conventional cutting) --- Motor power, lifting spindle: 11.0 kW Spindle speed: 6000 RPM Spindle diameter: 50 mm Clamping length: 285 mm Tool zero circle: 112 – 140 mm Max. tool diameter: 232 mm Vertical spindle stroke: 2 x 95 mm for 3 tools Psdpfx Absvnv Uus Ijrd Base position below table: 10 mm (adjustable up to 20 mm) Horizontal spindle stroke: 80 mm with climb-in plunge automation 2nd profiling spindle --- Motor power, lifting spindle: 11.0 kW Spindle speed: 6000 RPM Spindle diameter: 50 mm Clamping length: 285 mm Tool zero circle: 112 – 140 mm Max. tool diameter: 232 mm Vertical spindle stroke: 2 x 95 mm for 3 tools Base position below table: 10 mm (adjustable up to 20 mm) Horizontal spindle stroke: 80 mm 3rd profiling spindle --- Motor power, lifting spindle: 11.0 kW Spindle speed: 6000 RPM Spindle diameter: 50 mm Clamping length: 285 mm Tool zero circle: 112 – 140 mm Max. tool diameter: 232 mm Vertical spindle stroke: 2 x 95 mm for 3 tools Base position below table: 10 mm (adjustable up to 20 mm) Horizontal spindle stroke: 80 mm 4th profiling spindle – hardware machining unit, right --- For grooving the hardware rebate during the rebating process or for longitudinal grooving in the profile. Pneumatic horizontal movement selectable via switch on the operator panel. Motor: 2.2 kW Speed: 6000 RPM Spindle diameter: 40 mm Clamping height: 125 mm, for 2 tools Tool flight circle: min. 140 mm, max. 180 mm Feed motor power: 1.1 kW Feed speed...

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), I am selling the window fabrication profile folding machine center Weinig Univar 10. Year of manufacture: 1998. Milling heads by OERTLI. Available immediately. Unit price: €8,500. 4 units available. Condition: very good! Prsdpfx Abofzzhrs Iod

Kondisi: bekas, WEINIG UNIVAR 10 frame turning device, offered as a spare parts donor from a UC-Matic window production line. - Year of manufacture: 1997 - Sütron BT20 control system - Machine incomplete - Further details upon request Pjdpfx Aolf H Sqjb Ierd - Image for illustration purposes only.

Tahun pembuatan: 1997, Kondisi: sangat baik (bekas), I am selling a complete window manufacturing profiling line: - 1 unit 5-spindle four-sided planer with saw Weinig Unimat 23EL (without HESS sanding machine – alternative replacement machine upon agreement) - 2 units tenoning and slotting machines Weinig Unitec 10 - 2 units profile rebate processing center Weinig Univar 10 - 1 unit CNC dowel inserting machine KOCH WinDoor - Complete set of automatic Weinig feed and conveyor systems Year of manufacture: 1997 Cutterheads: OERTLI Pedofzzidjpfx Ab Isrd Available immediately. Already dismantled and secured on original pallets. Condition: Very good!

Kondisi: bekas, For profiling and re-milling of windows, doors, individual parts, and similar components with circumferential profiles including return transport. Units: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic 2. Profile milling unit, horizontal top, radially indexed to 2 positions, axially indexed to 2 positions, motor: 3 kW Prodpjlf H Susfx Ab Iod 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic 4. Profile milling unit, vertical right, radially indexed to 2 positions, axially indexed to 3 positions, motor: 3 kW 5. Profile milling unit, horizontal top, radially indexed to 8 positions, axially indexed to 2 positions, motor: 3 kW.

Kondisi: bekas, for profiling and re-milling windows, doors, individual components and similar items with circumferential profiles, including mechanization for single-person operation. Psdelf H S Aopfx Ab Ijrd Units: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic, synchronized feed device 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80 hydraulic 3. Profile milling unit, vertical right, radially indexed in 2 positions, axially indexed in 3 positions, motor: 3 kW 4. Profile milling unit, horizontal bottom, radially indexed in 2 positions, axially indexed in 2 positions, motor: 3 kW Re-milling carriage for narrow and short sashes, PC control Nexus.