Pusat pemesinan dengan pita tepi

Biesse Rover A Edge 1632

Numerical control BH 660 with BIESSE BSolid software
bEdge module for edge management
bSolid surface design
Sophia – IoT connectivity
Office control
Working area X-axis: 3,228 mm
Working area Y-axis: 1,580 mm
Working area Z-axis: 200 mm with suction cups H74 mm
Working area Z-axis: 245 mm with suction cups H29 mm
No. 8 adjustable ATS panel support rails
Pneumatic clamping installation, divided into two Y zones
No. 6 pneumatic Bakelite bars for panel lifting
No. 3 adjustable suction cups for rails
Suction cup setup assistant
No. 1 electrospindle (pantograph) with 4 axes, automatic tool changer, 13 kW motor (17.4 HP), liquid cooling, HSK cone connection, 20,000 rpm
Automatic tool changer with 16 positions on the X-axis carriage
Independent Tesa drilling spindles BH17 are arranged as follows:
No. 5 independent spindles for vertical drilling in the X direction
No. 5 independent spindles for vertical drilling in the Y direction
Ndsdpfjugpwnox An Usc
No. 4 spindles for horizontal drilling in the X direction
No. 2 spindles for horizontal drilling in the Y direction
No. 1 blade integrated into the drilling head, 120 mm diameter (usable cut 25 mm)
GU60L gluing unit for EVA adhesive with premelter – edge pressure system with double rubberized roller for spokes, max. inner diameter 30 mm and sensor for edge joint – 500 ml glue pot mounted on glue roller – edge preheating lamp – edge feed system – edge trimming system – option for manual edge insertion
Plastic edge thickness: 0.4 to 3 mm
Wood edge thickness: 0.4 to 2 mm
Laminate edge thickness: 0.4 to 1.2 mm
Maximum edge width: 65 mm
Workpiece thickness: 10 to 60 mm
Minimum machinable internal radius with edging: 30 mm
Maximum external radius for edges (proportional to edge thickness and stiffness):
* 10 mm with up to 1 mm edge thickness
* 20 mm with 2 mm edge thickness
* 30 mm with 3 mm edge thickness
Minimum size of edged panel: 300 x 300 mm
Minimum internal diameter for edges: 350 mm with plastic edges less than 1 mm thick and panel max. thickness 18 mm
Edge magazine with 2 positions in the safety enclosure for edges up to max. thickness 65 mm
Finish additive cleaning station with automatic dispensing of special cleaning fluids and cleaning cycle
No. 1 unit for rounding/contouring edges
No. 1 EF60A combination unit trimmer/scraper
Perimeter safety fence
Chip extraction system with motorized conveyor
Liquid cooling system
Automatic lubrication system
No. 1 vacuum pump, 250 m³/h
TECHNICAL DATA TO BE CONFIRMED

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.