Pusat pemrosesan dengan pita tepi

BIESSE ROVER B EDGE 1950

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Processing center Rover 20 Working area: 2,893 x 950 mm, milling spindle with ISO30 tool holder, 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills as well as grooving saw, 6-position tool changer. The NC410 control featured a floppy disk drive and a color monitor, as well as basic, graphically assisted programming options. Additionally, the Rover 20 already enabled pendulum (dual-zone) machining. Dimensions: approx. 3,800 x 2,000 mm, height 1,600 mm Control cabinet: 950 x 700 x 1,300 mm Fodslc Dwnspfx Aagjpd Ex site

Kondisi: sangat baik (bekas), Three-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Movable horizontal table (workpiece), stationary working head Control (BiesseWorks software), with separate electrical and control panel Working head safety enclosure, safety tread mats Entry support table (workpiece support) No. 2 workpiece clamping vices within the working area Exit table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm 90 x 70 x 8 (approx.) Maximum workpiece dimensions (X-Y-Z) mm 3000 x 1300 x 60 (approx.) Total connected load (kW) 24 WORKING UNITS (TOP): Independent vertical drilling spindles No. 29 Fpjdpfx Aaowb Allogjd Independent horizontal drilling spindles No. 10 (8 X + 2 Y) Grooving saw unit (for processing along X-axis), diameter 160 mm (No. 1 x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW) WORKING UNITS (BOTTOM): Independent vertical drilling spindles No. 29 Independent horizontal drilling spindles No. 10 (8 X + 2 Y) Grooving saw unit (for processing along X-axis), diameter 160 mm (No. 1 x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW)

Kondisi: bekas, Tahun pembuatan: 2016, Vitap Eclipse Kantenanleimmaschine für runde und gebogene Werkstücke Halbautomatische Kantenanleimmaschine zur Bearbeitung großer runder oder gebogener Werkstücke mit einer Plattenstärke von 10 bis 60 mm und einer Banddicke zwischen 1 und 3 mm. Die maximale Plattenhöhe von 60 mm ist nur bei einer Kantenstärke von 1 mm möglich. Bei größerer Bandstärke ist dies abhängig von der Bandqualität und sollte im Zusammenspiel mit der Schneideinheit vorab getestet werden. Ausstattung: - Zwei Kopierrollen zum Abtasten der Werkstückkontur - Leimstation - Leimbecken mit einem Fassungsvermögen von 1 kg - Zwei 800-W-Heizelemente mit elektronischer Temperaturanzeige über die SPS-Steuerung - Leimauftragung über Leimwalze - Leimbecken aus Aluminium für eine optimale Wärmeverteilung - Leimzulauf regulierbar per Knopfdruck - Automatische Schneideeinheit für Kantenmaterial von der Rolle von 3 bis 45 mm - Aggregat wird entweder durch Sensor für geschlossene Kantenumleimer mit perfektem Anschluss oder durch Encoder bei einseitiger Anleimung aktiviert - Lasersystem zur Längenermittlung – kein Vormessen erforderlich - Durchlauffunktion ein- und ausschaltbar - Höhenverstellbarer Tisch für schmale Platten - Fräsaggregat ein- und ausschaltbar Fsdpfx Aaewgb Hxjgjpd - Zwei Kopierrollen zum Abtasten der Werkstückkontur - Fräsaggregat ausgestattet mit 2 x 0,5 kW (15.000 U/min, Hochfrequenz) mit Ober-, Unter- und Front-Kopierrollen - Fräsaggregat mit Messern R=2, Phase 15°, D=69, Z=6 - Große Plattendreheinrichtung mit Vakuum zur Produktfixierung (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Die besten Holzbearbeitungsmaschinen aus den Niederlanden De beste gebruikte machines uit Nederland

Kondisi: bekas, nomor mesin/kendaraan: 007289, Area kerja sumbu X: 3200 mm Area kerja sumbu Y: 900 mm Daya spindle utama: 4,5 KW Fpodowukyqjpfx Aagod Jumlah sumbu terkontrol: 3 sumbu Jumlah spindle bor: 16

Kondisi: bekas, Tahun pembuatan: 2015, NC 1000 numerical control, Biesse Works Advanced software Working area in X-axis: 4300 mm – X-axis travel: 5365 mm Working area in Y-axis: 2205 mm – Y-axis travel: 2749 mm Z-axis working stroke: 160 mm – Z-axis travel: 385 mm FT nesting full-plane worktable Automatic loading system with side lift table Automatic labeling unit for barcode printing Automatic print-and-apply system for adhesive labels No. 1 vertical electrospindle preset for 4-axis machining (C-axis vector), with automatic tool change, HSK F63, 12 kW, including flange for aggregate use Knife unit integrated in the drilling head on X-axis – diameter 120 mm Automatic tool changer with 8 positions – mounted on the machine operating head Automatic tool changer with 21 positions – positioned at the rear of the machine with chain Drilling unit BH 40 L with independent spindles arranged as follows: - No. 17 vertical in X-axis - No. 12 vertical in Y-axis - No. 6 horizontal in X-axis - No. 4 horizontal in Y-axis Automatic unloading system with motorized belt Fpsdpfx Aaswt Snyjged Front safety and protection system with mats and safety nets Automatic lubrication system Air conditioning unit for the electrical cabinet No. 2 vacuum pumps, each 250 m³/h

Kondisi: bekas, Tahun pembuatan: 2014, cnc-bearbeitungszentrum-biesse-skill-12-24-g-ft Fpjdpfxewnhano Aaged

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 4.600 mm, jarak lintasan sumbu Y: 1.935 mm, jarak gerak sumbu Z: 275 mm, jumlah sumbu: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip removal, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have available for sale. Contact us for further information. Work Table and Clamping • 8 ATS panel supports (L = 1525 mm) and 24 guide rails • Automatic positioning of panel supports and guide rails (EPS X-Y) • Pneumatic locking system, divided into 2 working zones in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), with pneumatic system • 4 removable center stops, stroke 140 mm (2 left + 2 right), with pneumatic system Fpedpfx Ajx D H Hcjagsd • Sensor for detecting lowered stops • Pneumatic system for support bar holders • 6 support bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 configuration: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a machining unit with 5 interpolating axes (units can be used only when the electric spindle is vertical) • C3-P2 configuration: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • BH 42 L boring head • Chain tool changer with 22 positions (180 mm pitch) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires mounting device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Conveyor belt for removal of chips and scrap parts (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled boring head) Note: The technical data and descriptions are taken from the original order confirmation and are for information purposes only; they are not binding.

Kondisi: baik (bekas), BIESSE ARROW ATS 5-AXIS CNC MACHINING CENTRE NC1000 Fpedpfxoukcy Ej Aaged Machining head with revolver-type automatic tool changer BH39 drilling unit, 250m³/h vacuum pump (This machine was in operation for 10 years in a woodworking school)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Baujahr: 2003 Spannung: 400 V Frequenz: 50 Hz Fjdjtr A Evepfx Aagepd Gewicht: 3.200 kg Achszahl: 3

Kondisi: bekas, Tahun pembuatan: 2006, Numerical control XP 600 Fsdpsv Aacfjfx Aagjpd Working area X-axis: 3,060 mm Working area Y-axis: 1,140 mm Working area Z-axis: 160 mm Number of work zones: 2 Bar worktable 6 adjustable bars for suction cup support Number of pneumatic Bakelite bars for panel lifting: (?) 2 adjustable suction cups per bar with vacuum seal for securing the panel during machining 1 vertical electrospindle with C-axis, 12 kW motor Tool change system with 10 positions – located on the machine drill head, cone type ISO 30 Drill head BH19L with 18 spindles, arranged as follows: - 7 vertical spindles on the X-axis - 6 vertical spindles on the Y-axis - 4 horizontal spindles on the X-axis - 2 horizontal spindles on the Y-axis - 1 independent saw blade unit for grooving in the X-axis Front photocell guard and safety system Automatic lubrication system (?) Air conditioning system for cooling and cleaning the machine control panel Vacuum pump: 250 m³/h TECHNICAL DATA TO BE VERIFIED