Pusat permesinan CNC

SCM morbidelli M 800

Base machine M800 X5 TV 1 WORKING FIELD X: 5,020mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm pod height)

MACHINE STRUCTURE
The base structure is a monolithic design made of thick-walled steel. It is reinforced over the entire machine bed with welded-in parts, providing exceptional stability. The table design, featuring a large base, is the key to ensuring lasting precision and stability. The machine layout allows the operator to achieve optimal workflow despite minimal space requirements. The mobile gantry is built from a solid monoblock. It is positioned in the X direction on prismatic, ground guides using ball recirculation carriages. Mounted on this mobile unit carrier, the working unit is also installed on prismatic, ground guides and ball recirculation carriages.

AXIS MOVEMENT
Codpfx Asxy Tmnocioha
All axis movements are performed on large cross-section prism linear guides with ball recirculation shoes offering extensive contact area, ensuring optimal sliding even at the highest speeds and accelerations. Precise and swift positioning of the moving gantry (X-axis) is achieved via helical rack and pinion drive. Large cross-section ball screws guarantee accurate positioning of the working unit along the mobile gantry (Y- and Z-axes). Perfect mechanical dynamics and maximum positioning accuracy are governed by premium quality drives and brushless motors.

Maximum axis speeds:
- X-axis = 90 m/min
- Y-axis = 90 m/min
- Z-axis = 30 m/min

SAFETY DEVICE WITH BUMPER AND LIGHT CURTAIN 1
Bumpers with sensors are fitted around the mobile stand, and a light curtain system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower rate of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions associated with safety mat systems. This prevents undesired interruptions of the machining cycle and allows greater freedom of movement around the work table.

CE Certificate for the safety system 1
Safety enclosure 1
Safety enclosure lateral and rear

Automatic centralized lubrication controlled via CNC 1
Lubrication of X, Y, and Z axes governed at regular intervals by CNC control, eliminating manual intervention at the machine.

Central extraction nozzle 1
All individual extraction ports of the machining units are merged into one central port. Inside the port, various slide valves are controlled by the NC system, reducing the required extraction air volume.

Chip conveyor 1

Maxi – 5 axis electrospindle 11 kW HSK-63 “Prisma K” 1
5-axis electrospindle with 11 kW power at 20,000 rpm in S1 (100% duty cycle)
Speed: max. 20,000 rpm
Rotation direction: left / right
Liquid cooling
Tool interface: HSK-63F
18 kW inverter for stepless, uniform power delivery
Max. rotation B-axis = 200° (+/-100°)
C-axis = 650°
Thanks to non-orthogonal axes, complex horizontal positioning can be performed in compact working spaces. This allows machining of complex geometries without the risk of collision.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.