Pusat permesinan 5-sumbu

BIESSE ROVER C 9.50 CONF. 3

Kondisi: baru, Tahun pembuatan: 2023, gaya penekanan: 120 t, panjang total: 3.000 mm, lebar total: 1.300 mm, suhu operasional: 120 °C, diameter silinder: 85 mm, lebar bukaan: 400 mm,

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, NC-controlled drilling and dowel insertion machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Hedpfx Alsxdl Raj Iol Workpiece dimensions Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: Max. length 600 mm Configuration: - Horizontal drilling unit with 3 individually selectable spindles, spindle spacing 32 mm - 1 dowel insertion unit (spaced 32 mm from the first drill spindle) - Glue nozzle with adjustable glue dosage - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel dimensions: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel supply 1. BASE MACHINE - Robust steel frame construction - Axis movement in X, Y, and Z directions - Ball screw drive (Y and Z axes) and rack-and-pinion drive (X axis) - Digital AC servo motor - Support table with left and right side fences as well as rear fence rail - Pneumatically lowerable center stop, manually controlled via selector switch - 6 top hold-down cylinders, manually adjustable - Central lubrication Power control PC85T Modern control system based on Windows PC

Kondisi: bekas, nomor mesin/kendaraan: 007716, Working area X-axis: 3250 mm Working area Y-axis: 1220 mm Working surface: With vacuum console supports Main spindle power: 12 kW Hsdpfx Alowuz N Ne Iol Number of controlled axes: 4 axes Number of drilling spindles: 18 Number of tool stations: 16

Kondisi: bekas, Tahun pembuatan: 2011, Base machine M800 X5 TV 1 WORKING FIELD X: 5,020mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm pod height) MACHINE STRUCTURE The base structure is a monolithic design made of thick-walled steel. It is reinforced over the entire machine bed with welded-in parts, providing exceptional stability. The table design, featuring a large base, is the key to ensuring lasting precision and stability. The machine layout allows the operator to achieve optimal workflow despite minimal space requirements. The mobile gantry is built from a solid monoblock. It is positioned in the X direction on prismatic, ground guides using ball recirculation carriages. Mounted on this mobile unit carrier, the working unit is also installed on prismatic, ground guides and ball recirculation carriages. AXIS MOVEMENT All axis movements are performed on large cross-section prism linear guides with ball recirculation shoes offering extensive contact area, ensuring optimal sliding even at the highest speeds and accelerations. Precise and swift positioning of the moving gantry (X-axis) is achieved via helical rack and pinion drive. Large cross-section ball screws guarantee accurate positioning of the working unit along the mobile gantry (Y- and Z-axes). Perfect mechanical dynamics and maximum positioning accuracy are governed by premium quality drives and brushless motors. Maximum axis speeds: - X-axis = 90 m/min - Y-axis = 90 m/min - Z-axis = 30 m/min SAFETY DEVICE WITH BUMPER AND LIGHT CURTAIN 1 Bumpers with sensors are fitted around the mobile stand, and a light curtain system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower rate of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions associated with safety mat systems. This prevents undesired interruptions of the machining cycle and allows greater freedom of movement around the work table. CE Certificate for the safety system 1 Safety enclosure 1 Safety enclosure lateral and rear Automatic centralized lubrication controlled via CNC 1 Lubrication of X, Y, and Z axes governed at regular intervals by CNC control, eliminating manual intervention at the machine. Hedpfx Aloxy Tmne Iel Central extraction nozzle 1 All individual extraction ports of the machining units are merged into one central port. Inside the port, various slide valves are controlled by the NC system, reducing the required extraction air volume. Chip conveyor 1 Maxi – 5 axis electrospindle 11 kW HSK-63 “Prisma K” 1 5-axis electrospindle with 11 kW power at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left / right Liquid cooling Tool interface: HSK-63F 18 kW inverter for stepless, uniform power delivery Max. rotation B-axis = 200° (+/-100°) C-axis = 650° Thanks to non-orthogonal axes, complex horizontal positioning can be performed in compact working spaces. This allows machining of complex geometries without the risk of collision.

Kondisi: bekas, Tahun pembuatan: 2005, Ukuran pemrosesan: 3000 x 1600 x 180 mm Pompa tekanan tinggi 60 HP / 45 kW Model E-60 Tekanan kerja 4.130 BAR Konsumsi air 4,69 liter/menit Perangkat lunak: Watercad-CAM Optimalisasi pemotongan otomatis Lokasi penyimpanan: pelanggan Hedpfxsxgfbqe Al Isl

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Hsdpfx Alegwbbqs Ijl Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tested equipment, functional, used BIESSE Polymac LATO 38 edge bander - Glue pot - Guillotine Hjdpfxjuhm Ado Al Iel - Pre-cutting / end trimming - 1 tiltable top/bottom trimming unit - 2 tiltable top/bottom trimming units - Outfeed brushes. Possibility to test on site Machine available for inspection in our Cosne workshop Price includes loading onto truck

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, panjang meja: 810 mm, lebar meja: 975 mm, MESIN GERGJI PITA REFENDERE MEBER MOD. SR900 Hedpfjx Rt Aasx Al Iel - Ukuran meja 975x810 mm - Motor 11 kW - Tahun 2000 (CE) - LENGKAP DENGAN MANUAL

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 1.670 mm, jarak gerak sumbu Z: 500 mm, jumlah sumbu: 4, This 4-axis CNC machining center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1,000–24,000 rpm and a C-axis rotation of 0–360°. The machine is equipped with a 12-position linear tool changer and a comprehensive drilling head with 16 spindles. Additionally, it offers a robust safety system with a light barrier. Take advantage of this opportunity and purchase this Felder Format 4 Profit H 200 CNC machining center. Contact us for further details on this machine. • Automatic central lubrication • Working area: X 3,300 mm / Y 1,280 mm / Z 250 mm (clearance height from console level depends on clamping system) • Operator terminal on the left side of the machine • Hand-held terminal with axis speed control and emergency stop • Software: Woodflash (CNC panel, tool database, program editor) Hjdpfxox D D Hmj Al Iel • Position display for workpiece support and vacuum suction cups • Vacuum connection for template milling (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction capacity 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1,000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-position linear on the left side of the machine frame, including holder for aggregates; max. tool diameter 250 mm; max. tool length 240 mm • Drilling head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); advance stroke 70 mm; drilling depth 70 mm; shank Ø 10 mm • Grooving saws: 2 (one X, one Y); max. blade Ø 120 mm; max. thickness 5 mm; infinitely variable speed up to 7,500 rpm • Safety: Front-side light curtain system

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, daya: 5 kW (6,80 hp), ketinggian potong (maks.): 200 mm, lebar pemotongan (maks.): 1.300 mm, diameter mata gergaji: 550 mm, panjang pemotongan (maks.): 3.200 mm, lebar potong di pagar rip: 1.300 mm, panjang meja geser: 3.200 mm, Exhibition machine F 45 Elmo Drive - Tilting +/- 45° - Cutting height 200 mm - Scoring unit preparation No. M24038 - Double roller carriage with 3200 mm - Mitre angle stop 3200 mm Digit L - CNC rip fence 1300 mm Hsdpjuh R R Esfx Al Isl - Duplex mitre fence 1350 mm manual - Template holder - On/off switch on the double roller carriage - Front support roller