Gergaji bundar untuk logam ringan & aluminium

ProfiFeed Technologies A700 Semi-Automatic Aluminium Saw

Kondisi: sangat baik (bekas), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roll feed unit Planer moulder equipped with reinforced KASCHWIG three-sided sound insulation cabin • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed speed control (frequency regulated): 8 – 80 m/min • Feed motor: 18.5 KW • 1st bottom spindle: 11.0 KW • 2nd right spindle: 11.0 KW • 3rd left spindle: 11.0 KW • 4th right spindle: 11.0 KW • 5th left spindle: 11.0 KW • 6th top spindle: 15.0 KW • 7th bottom spindle: 11.0 KW • 8th top spindle: 15.0 KW • 9th bottom spindle: 15.0 KW • 10th universal spindle: 11.0 KW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindles equipped with NEW motor start/ brake combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven table rollers • Spindles 1 + 6 + 7 + 8 + 9 with counter bearing • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chrome plated table plates • Hard-chrome plated fences • Pneumatically assisted side pressure rollers • Automatic table lubrication • Centralised lubrication points • Freestanding control panel • Total connected load approx. 145 KW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list and circuit diagram • Machine supplied without planing heads Machine dimensions approx.: Redpswvqkljfx Apcjw • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 KG Factory-new WEINIG components installed: NEW horizontal / vertical spindles NEW counter bearings All spindles with HL bearing arrangement All motors newly fitted with bearings NEW electronic motor soft-start / brake units NEW hard-chrome plated table plates NEW hard-chrome plated fences Numerous additional NEW PARTS installed in the machine Condition: Refer to attached photos. Technically in excellent condition. Infeed mechanisation unrefurbished – complete parts – functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by prior arrangement Subject to prior sale and errors excepted.

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800 rpm. An on-site inspection is possible. Rjdpfx Aewu Ez Njpcew

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, We offer a Cabinplant snack packaging line manufactured in 2018, comprising the following equipment: - Single-lane elevator - Three-lane elevator - 24-head combination weigher with 1L hoppers - 32-head combination weigher with 1L hoppers - KEN Hygiene System EWD 50 (washing station for auxiliary weigher components) - Platform with stairs - Distribution tool – 2 units - Multivac R245 Type ASE 500, gas, vacuum (without vacuum pump) Rjdpfxspxm Uge Apcow The set has only been used for equipment testing and has approximately 100 operating hours. The line has been professionally disassembled by authorized Cabinplant and Multivac service teams.

Kondisi: baru, Bandsawing machine Manufacturer: METALLKRAFT Model: BMBS 300 x 320 HA-DG Article No.: 3690041 Condition: New machine Cutting range (round): 300 mm Blade speed: 20–100 m/min, steplessly adjustable Standard features: - Fully hydraulic, semi-automatic design: Redpfsilg Hdox Apcew Upon start, the machine clamps automatically; after cutting, it returns to the home position, stops the saw blade, and opens the vice. - Cut sensor for automatic material height detection - Horizontal vice, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Swarf removal brush - Measuring stop with 1,000 mm scale - Coolant system - Operating manual

Kondisi: baru, Tahun pembuatan: 2025, diameter mata gergaji: 550 mm, tegangan masuk: 400 V, sambungan udara terkompresi: 7 batang, Perlengkapan: dokumentasi / manual, - Saw blade 550 mm - Double mitre - 4 pneumatic clamps - Hydrocheck system - Misting lubrication system - 1 roller conveyor 300 cm Rjdpfx Aehzuu Nspcsw - 1 roller conveyor 300 cm with length stop - Blow gun - Protective cover - Documentation - 400V

Kondisi: baru, Tahun pembuatan: 2026, CNC drilling and milling machine Kudu with CNC control and tool changer (3-axis) Drilling and milling machine with movable processing unit – the table remains stationary, and the drilling head moves. The drilling unit can operate both manually and fully automatically. After each drilling cycle, the processing unit automatically moves to the next drilling position along the X and Y axes. Operation is designed for ease of use. Data transfer to the machine control is possible via DXF/DWG file formats using a programming station. Alternatively, programming can also be performed directly at the machine control unit. The system is highly robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base frame • Drill head speed: up to 2,500 rpm (standard version), supplied with the appropriate speed for your application • Tool holder: SK 40 • X, Y and Z axis driven by servomotors • Rapid traverse in X axis: 20 m/min • Rapid traverse in Y axis: 5 m/min • Distance from table top to bottom edge of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St 50 (tool-dependent) • Tapping: M4 – M30 (with compensation chuck) • Y-axis travel: 300 mm • Positioning tolerance X axis: ±0.1 mm • Positioning tolerance Y axis: 0.06 mm • Positioning tolerance Z axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2,300 kg • Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Compressed air connection: 8 bar • Front safety via light barrier • Rear access protection via safety fence • Control: 21.5" touch screen panel, reinforced front glass • Simple programming directly at the machine • Milling of elongated holes and circles • Lubrication via minimal quantity spray system • Without material clamping devices • Remote maintenance via Teamviewer possible (LAN interface) • Tool magazine for drilling tools, with dimensions, rotational speed • Simulation of work processes • Digital handwheel Your benefits: • Workpiece surfaces are protected • Clear, graphical user interface • Machining directly at the workpiece end is no problem • 50% space savings compared to moving-table systems • Chips are collected in a chip tray • Easiest programming & operation Rodefu Ivzjpfx Apcew • Minimal quantity spray system (standard) • Programming errors eliminated by CAD/CAM You are welcome to view the desired system at any time in our production/showroom. Please feel free to contact us about this. We look forward to your inquiry! Plantec Maschinen GmbH

Kondisi: siap digunakan (bekas), Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control system: Yes Weight: 3300 kg Dimensions (L/W/H): 2600 x 920 x 1890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- Redpfx Apjvu Hgbscew 4-belt sanding machine with top/bottom disc unit Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, e.g. window scantlings etc. Robust premium design with innovative features. Suitable for high-duty cycles even with higher material removal rates. - Consecutively arranged sanding units for pre-sanding, fine sanding, and finish sanding, each from above and below 1st belt sanding unit with heavy-duty steel roller 2nd belt sanding unit with rubber-coated roller and shoe 3rd finishing unit with fiber brush (see special accessories below) - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free, wear-free CERMET-coated sanding shoes with excellent thermal conductivity and dimensional stability - External cooling of the sanding zones for cooler grinding and longer belt life - Forced pneumatic controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Dust extraction for airborne dust at tension rollers - Integrated brushing and finishing units with large dust extraction device - Motorized sanding thickness adjustment via precision ball screws and generously dimensioned linear ball bearings on hardened and ground precision shafts with dust and dirt protection - Material removal setting below via precision spindle with scale ring display (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure - Quick sanding belt change via pneumatic belt release in seconds - Adjustable sanding belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed protection via contact roller for over-thick workpieces - Workpiece transport via calibrated, non-slip and adhesive transport belts over heavy cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Universal joint drive shaft for smooth, even workpiece transport - Feed gear motor with stepless speed control, 4–20 m/min - All motors electrically protected - Ergonomically arranged control elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm, 0.37 kW each - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2,740 mm): 2,600 mm - Length with control panel (with soft disc 3,035 mm): 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air jet for 4-belt system via nozzles directly at the radii ...

Kondisi: baru, Tahun pembuatan: 2026, De volledig automatische machine is ontworpen voor het snijden van middelgrote tot grote aluminium profielen met gebruiksvriendelijke automatisering. Plaats eenvoudigweg een aluminium profiel op de machine; deze detecteert het profiel automatisch en voert de snijbewerkingen uit met uiterst nauwkeurige, door een servomotor aangestuurde materiaalpositionering. Met Excel-joblijsten via WIFI kunnen grote snijlijsten efficiënt worden ingevoerd. Bij elk aluminium profiel dat u plaatst, ongeacht de lengte, meet een lasersensor de exacte lengte. Een krachtige optimalisatie-algoritme berekent onmiddellijk de optimale snijvolgorde voor minimaal materiaalverlies. De machine verwerkt de berekende snijlijst volledig automatisch, zonder onderbrekingen. U hoeft niets in te voeren – blijf alleen nieuwe aluminium profielen invoeren. Dit systeem is een eenvoudig en snel alternatief voor dubbele verstekzagen. Voer simpelweg de gewenste lengtes en hoeken in (of importeer deze) en druk op START. De machine produceert continu nauwkeurige verstekonderdelen op hoge snelheid. • Volautomatische zaagmachine met automatische aanvoer en op lengte zagen. • Gebruiksvriendelijke bediening voor automatisch werken – werkstuk invoeren en binnen enkele seconden snijden. • Eenvoudig enkelstuks, batch- of grote Excel-lijsten verwerken. • Bundel-/meervoudige stangen snijden en tellen. • Externe WIFI-input van Excel-joblijsten met uitgebreide datamapping mogelijkheden. • Volledig instelbare zaag- en aanvoersnelheden voor maximale verwerkingssnelheid. • Automatische optimalisatiemodus met laser-meetfunctie en restmateriaal-minimalisatie (optioneel). • Automatische etikettenprinter voor onderdelen aansturing vanuit jobliste (handmatige etikettering, optioneel). • Inline, direct-op-materiaal printer zonder operator-inbreng vereist (optioneel). Rjdpfx Aef Ekn Ijpcsw • Barcodes of QR-codes printen of scannen voor job-invoer (optioneel). • Geautomatiseerde servo-positie-instelling van de zaagkop tot ±75° (optioneel). Uitermate geschikt voor: • Productie van ramen en deuren • Productie van aluminium verstekconstructies • Productie van gefabriceerde aluminiumconstructies • Composietproductie • Productie van jaloezieën, zonwering en meubelen • Verkoop van aluminium profielen Model: A550 Lengte: 3 m Lineaire eenheid: ProfiStop Alpha Materiaalinvoer: 1680 mm Duwcapaciteit: 20 – 40 kg Software: Optimiser HOOGWAARDIGE, IN AUSTRALIË GEFABRICEERDE MACHINES.

Kondisi: bekas, en-GB Rodpfx Aeywkc Rjpcsw

Kondisi: baru, Tahun pembuatan: 2026, Mini crane on crawler chassis TB5000 Mini crane on crawler chassis for indoor and outdoor applications. Maximum load capacity: 2,400 kg. * Radio remote control – driving, operation, outriggers * Dual power supply – diesel and 230 V electric Rjdpfx Apsibqraecew * Maximum load capacity – 2,400 kg * Standard overload protection system * Maximum horizontal outreach over 11 m * Four hydraulic extensions + 1 manual extension * Maximum vertical reach over 13 m * 4 hydraulically lowerable supports * Weight approx. 2,200 kg * Height approx. 195 cm * Width approx. 88 cm * Active boom angle 16 degrees Additional optional equipment: * Search hook * Hydraulic winch, 990 kg * Operation with lithium-ion battery * Pads for support legs * Hydraulic fly jib Available in the color of your choice.