Mesin pengikat tepi

Biesse Stream A 5.0

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Numerical Control Smart Touch with Sintra HD Software Panel height: 10 – 60 mm Solid wood: 22 mm PVC/ABS: 3 mm Feed speed up to 25 m/min Working height adjustable electronically via CNC Motorized panel feed guide, electronically adjustable via CNC Lodjwlbxlepfx Aahsta Anti-adhesive unit Pre-milling unit with 2 motors, electronically adjustable via CNC Coil holder plate for 1 position Gluing unit for EVA hot-melt glue with glue pot End trimming unit with 2 motors, equipped with dynamic extraction system following the blade movement Flush trimming/chamfering unit with staggered 2 motors, electronically adjustable via CNC Non-stick unit Corner rounding unit with 2 multifunction motors (chamfering + corner rounding) Electronic edge scraper unit, electronically adjustable via CNC Glue scraper unit Brush unit "SP-501" Automatic return system with bridge discharge Winner 4A

Kondisi: bekas, Diameter rol: 800 mm Maks. tinggi potong: 440 mm Maks. lebar potong: 785 mm Tinggi meja: 970 mm Ukuran meja: 1170 x 800 mm Lebar mata pisau: 40 x 7/10 mm Panjang mata pisau: 5630 mm Diameter hisap: 120 mm Dimensi: 1625 x 940 x 2516 mm Berat: 770 kg Lokasi stok: Nattheim Ledpfxjwayzbs Aahota

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control Ljdovvkfdjpfx Aahsta - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, MESIN GERGAJI PANEL HOLZMA HPP250 320x320 Panjang potong: 3200 mm Lebar potong: 3200 mm Ledpfxoxugdve Aahjta 3 meja udara Kontrol daya Tahun produksi: 2007

Kondisi: bekas, Tahun pembuatan: 2012, Base machine Olimpic K 800 "T-ERL" (47), 1 pc STANDARD EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal support of work units - Swiveling control console - Support roller conveyor with ball-bushing guides along entire machine length - Protective and noise-reduction hood with separate doors between gluing and finishing units - Extraction ports arranged on the noise reduction hood - Electrical system with lockable main switch - Emergency stop buttons at infeed and outfeed - Inverter for electric spindles PANEL FEED SYSTEM: - Feed chain with rubber sliding pads, featuring a high coefficient of friction, mounted on 1¼” industrial chain - The chain runs on 2 guides made of hardened and ground steel, one round and one flat, to ensure straight feed and prevent lateral deviation - Automatic central lubrication for the feed chain Ljdsxq Apgepfx Aahsta - The upper pressure beam is a thick-walled steel structure fitted with double rows of roller bearings and protective device for pressure rollers - Manual lifting of the pressure unit with automatic positioning of the working units when changing panel thickness - Mechanical digital display for monitoring selected panel thickness CONTROL “ORION 100” Control system with PLC, allowing fast, simple, and error-free execution of individual processing programs (max. 60 programs). Manages pneumatic positioning of units, if equipped on the machine. (The control system does not include pneumatic positioning.) - Alphanumeric keypad and display - Function keys for quick access to processing units - Operating temperature range from 0 to +45°C MAIN FUNCTIONS: - Control of work units and automatic activation of motors - Monitoring and adjustment of glue pot temperature - Selection between longitudinal and cross processing without program change - Simple, guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: quantity, edge tape consumption, total chain feed distance - Measurement unit selectable in mm or inches Technical data OLIMPIC K800 T-ER L: Edge thickness: 0.4 to 8 mm Max edgebanding thickness, roll material: 3 mm Feed speed: 12/18 m/min Working height: 8 to 60 mm Max. dimensions of edge strip: 135 mm² Rotary table diameter: 780 mm Max. excess relative to panel thickness: 4 (2+2) mm Min. panel width (with minimal 210 mm length): 55 mm Min. panel length (with minimal 100 mm width): - with strip or roll edge max 3 mm: 140 mm - with solid wood edge: 200 mm Min. distance between consecutive panels at m/min 11 (16): 750 (850) Standard equipment: - Pre-milling unit at infeed RT-E - Edgebanding station VC-800 - End trimming unit KSEL - Flush trimming unit, tiltable RI/800 - Corner rounding unit ROUND K - Scraper unit RAS-V - ½ free space for flat scraper - 1 S free space for flat scraper, universal mill, or buffing unit - 1 F free space for blowing nozzle unit European safety regulations (CE marking) 1 pc Voltage 400 V EU 1 pc Frequency 50 Hz 1 pc "Autoset" for versions ER2, T-ERS, and T-ERL Enables all necessary adjustments during every job change, directly from the control console. Includes: - Time-controlled pressure unit - Pneumatic and independent swiveling of the end saw blades (front/rear) - Pneumatic remote adjustment for the flush trimming unit RI/800

Kondisi: bekas, Tahun pembuatan: 2019, Edge control, numerical control. Panel height min-max: 6 - 60 mm. PVC/ABS up to 3 mm. Minimum panel length/width: 140/60 mm. Feed speed up to 10 / 25 m/min, continuous. Working height electronically adjustable by CNC. Side roller track with return rollers for panel support. Rectifying unit with 2 motors. Coil holder plate. Glue unit for EVA/PUR glue, suitable for cartridge or granulate system. Edge pressure group for straight profiles with electronically adjustable pressure rollers (CNC). End cutting unit with 2 motors. Trimming unit with 2 tilt motors, electronically adjustable by CNC. Corner rounding unit with 4 multifunction motors (corner trimming + rounding), numerically controlled, automatic. Scraper unit with electronic control, CNC. Glue scraper group. Brushing unit. Machine length approx. 6500 mm. Weight approx. 2750 kg. Lsdewwhn Depfx Aahjta

Kondisi: bekas, nomor mesin/kendaraan: 007816, Posisi 1: Gudang Otomatis BIESSE-SELCO SK 450 Ledpswuufqofx Aahjta Posisi 2: Gergaji Panel dengan Gudang Otomatis BIESSE-SELCO SK 450

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Leto izdelave: 2022 Serijska številka: 0-200-73-4868 Odlično stanje – uporabljan izključno za demonstracije in vzorčno proizvodnjo. Naprava je profesionalno vzdrževana in je takoj na voljo za ogled v Sloveniji. Tehnični podatki in oprema: • Neprekinjeno nastavljiva dovodna hitrost: 16–25 m/min • Debelina obdelovanca: 8–60 mm • Fiksni vodilni prislon na levi strani • Nastavljiva višina obdelave • Predpriprava za povratni sistem LOOPTEQ O-200/O-300 • Zaklepni sistem za podajanje • Poravnava obdelovanca na vstopu z valjčno podporo • Zgornja pritisna enota • Formatirni paket z DIA spojenim rezkalnim garnituro WD40 • Lepljivi paket s predgretjem do debeline 60 mm • Sistem za nanašanje lepila s funkcijo praznjenja • Magacin robnih trakov z dvema navpičnima držaloma za rolo • Cona pritiska • Paket PERFORMANCE2 • Enota za čelno rezanje PK25 • Enota za grobo rezanje BF10 (ravni rezkalni komplet I-HM) Ltedpfxsxwurye Aahoa • Enota za profilno rezanje FF32 zgoraj/spodaj WD60 s sistemom za hitro menjavo FLEXTRIM (2 radija) • Samodejni multi-strgalo MN21 z garnituro profilnih nožev • Enota za pršenje čistilnega sredstva • Strgalo za lepilni spoj FA20 BASIC • Polirna enota FP10 zgoraj in spodaj • Krmilni sistem PowerControl PC23 PowerTouch • TAPIO Ready • Ethernet omrežna povezava • Žični ročni upravljalnik za nastavitveno delovanje • Programska oprema WOODCOMMANDER s funkcijo zapisovanja MMR, ToolManager, nastavitvijo hitrosti za sledenje in popolnimi diagnostičnimi funkcijami • Dokumentacija v slovenščini (digitalno in tiskano) • Možnost oddaljenega servisa

Kondisi: bekas, Tahun pembuatan: 2011, panjang total: 4.000 mm, tinggi total: 1.600 mm, lebar total: 970 mm, Weight: 1,300 kg Price: On request - Year of manufacture: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH/115214 - Number of units: 6 - 1st unit type: Premilling unit - 2nd unit type: Glue application unit - 3rd unit type: End trimming unit - 4th unit type: Rough trimming unit - 5th unit type: Radius scraping unit - 6th unit type: Flat scraping unit - Max. edge band thickness [mm]: 6 - Max. panel thickness [mm]: 60 - Min. panel length [mm]: 140 - Max. feed speed [m/min]: 11 - Voltage [V]: 400 - Power consumption [A]: 23 - Transport dimensions: 4000mm x 975mm x 1600mm (L x W x H) - Transport weight [kg]: 1300kg - Number of transport packages: 1 Financial Information VAT: The stated price is excluding VAT Ltodpfx Aaswnickjhsa VAT / margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for any items from the industrial sector Yorick Diebels

Kondisi: bekas, Tahun pembuatan: 2014, Used machine Year of manufacture: 2014 Equipment and technical data: Control unit with 10.4" touch color display Extendable workpiece support Lsdpjw Nadtjfx Aahota Motor-driven, positioning-controlled pressure beam Chain feed with 12 m/min feed speed Ball bearing roller support disc, d = 770 mm Double-motor jointing milling unit / 2 x 1.1 kW Edge feed for coil and strip material 0.4 - 10 mm (edge detection via infrared sensor) Teflon-coated glue application unit Pre-melting unit for EVA adhesive Exchangeable glue application unit for EVA Exchangeable glue application unit for PU Motor-driven, positioning-controlled pressure unit Double-motor end trimming saw unit / 2 x 0.50 kW Double-motor multifunction unit for radius, flush, and chamfer milling / 2 x 0.75 kW Corner processing unit Radius scraper Flat scraper Double-motor polishing unit (buffing) Spraying unit for release agent at machine infeed side Spraying unit for cleaning agent before the polishing unit Availability: short notice Location: 65439 Flörsheim