Beli Mesin softforming bekas (7)

Kondisi: bekas, Tahun pembuatan: 2012, Mesin pelapis tepi dengan pembentukan lembut dan dilengkapi dengan perangkat pemotong pelat Merek: Elwood Tahun Pembuatan: 2012 Data Teknis - Sistem pengaplikasian perekat dengan nosel celah - Kompatibel dengan perekat EVA dan PUR - Sistem pelebur dan pengaplikasian perekat Meler - Suhu dan waktu peleburan perekat yang dikontrol secara elektronik - Ketebalan pelat: 10-60 mm - 2 unit frais profil - Lampu pemanas IR untuk pemanasan awal material - Perangkat penyemprot untuk bahan pelepas - Zona tekanan dengan bantalan menara berpemanas (dapat diganti dengan rol tekanan) - Majalah pita tepi - Unit pemangkas tepi depan dan belakang Godpfxozuyi So Adqokc - Unit pemangkas tepi atas dan bawah untuk overhang tepi longitudinal (2 di atas + 2 di bawah) - Unit pemoles tepi atas dan bawah - Kontrol komputer untuk pengaturan yang cepat, mudah, dan presisi dari fungsi utama dan unit mesin Catatan: Data teknis dan deskripsi adalah salinan dari konfirmasi pesanan saat itu. Informasi ini hanya untuk tujuan informasi dan tidak mengikat.

Kondisi: sangat baik (bekas), FORMAT and EDGE-BANDING LINE for SINGLE-SIDED POSTFORMING OPERATIONS (FOR DIRECT PROCESS) Consisting of the following machines: A) Double-sided gantry feeding system “TREVISAN” with motorized roller conveyor B) HOMAG single-sided POSTFORMING MACHINE FOR DIRECT PROCESS Mod. Profi VFL79/3/P/A - Max. laminate thickness: 0.35 mm (for L and U profiles) - Workpiece thickness (min/max): 16 / 30 mm (optionally up to 50 mm) - Minimum workpiece width: 150 mm - Feed speed: 10 – 32 m/min - Control system: PC 22 / Software package woodCommander - 01° Standard milling unit, 2.2 kW (for top grooving) - 02° Hogging unit, 15 kW (for pre-milling from above) 0° - 15° - 03° Standard milling unit, 6.6 kW (for rebate milling from above), motor shaft for hydro clamping - 04° Standard milling unit, 6.6 kW (for rebate milling from below) 0° - 120° (with hydro clamping) - 05° Radius milling unit, 0.7 kW (for profiling corners) - 06° Milling unit for top layer at U-profiles, HSK25, 1.85 kW - 07° Universal milling unit UF 11, 4 kW (for grooving or rebating) - 08° Milling unit, 2.2 kW (for chamfer and laminate flap milling above) - 09° Milling unit, 2.2 kW (for bottom bending groove milling) - 10° RIGHT: Standard milling unit 6.6 kW (for grooving or rebating), working width 160 – 1050 mm Gkjdpfx Adsnzhxqeqsc - 11° RIGHT: Milling unit above and below, 2 x 1 kW, 0° – 25° - 12° Workpiece cleaning postforming, blower 0.55 kW - 13° Laminate overhang monitoring (for detecting laminate break-outs) - 14° Compact gluing unit PU34 + QA34, slot nozzle glue application - 15° Base unit pressure zone L-profile VF Direct for max. workpiece thickness 50 mm - 16° Base unit pressure zone for U-profile VF Direct for special profile R = 2.5 mm - 17° Roll cutter above - 18° Milling unit above, 1 x 0.55 kW, 0° – 30° - 19° Polishing unit above with oscillation, 1 x 0.25 kW C) Double-sided gantry stacking system “TREVISAN” with motorized roller conveyor

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING AND FORMATTING MACHINE (LEFT) "SOFTFORMING" Edge material (rolls) thickness (min/max) mm: 0.4 / 3 Panel thickness (min/max) mm: 8 / 60 Control / Software: PC 22 / WoodCommander Feed speed (adjustable) m/min: 10 - 40 Side adjustment, aggregate carrier manual mm: 30 - 80 FORMATTING UNITS: Spraying device (for liquid anti-adhesive) Gkodpfet N H Taex Adqsc Double jointing cutter unit KD 10 (2 x kW 6.6) Milling unit for softforming (2 x kW 1.85) 0°-20° Belt sanding unit for straight edge KS 10 (mm 120 x 2100) Free space (mm 700) EDGE BANDING SECTION: Gluing unit (hot melt glue + pre-melter) E34 softforming Pressure roller conveyor G (revolver with 4 positions) for straight and shaped (softforming) edges with over/under trimming knives (in-lay) Edge magazine for rolls E3 (compartment no. 6) End trimming unit HL 84 (2 x kW 0.8) 0°-30° (max 25 m/min) 1st milling unit (2 x kW 0.55) 0°-30° (pneumatic adjustment) 2nd milling unit (2 x kW 0.55) 0°-30° (pneumatic adjustment) Universal milling unit for grooving, rebating, and profiling UF11 (1 x kW 4) 0°-90° Profile scraping unit PN20 (pneumatic) Finishing unit (flat scraper + smoothing unit) FA11

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, de Gkedpfx Adexcwrmeqjc

Kondisi: sangat baik (bekas), Double-Sided FORMAT & EDGE BANDING MACHINE (First machine in a production line) Edge Material (Rolls) Thickness (min/max) mm: 0.3 - 3 Panel Thickness (min/max) mm: 10 - 60 Godpfx Adjt N Ix Reqjkc Working Width (min/max) mm: 270 - 1200 Control System / Software: SINITRA Feed Speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and Noise Protection: Enclosed cabin Side Adjustment of Aggregate Carrier: Manual FORMATTING UNIT (for each side): 2 x DT 10 Pre-milling Units (5.8 kW each) Free space for jointing unit FS Jointing Unit ES30 + ER30 (5 kW each) 0° - 90° Universal Milling Unit Softforming SF 10 (2 x 2.4 kW) 0° - 45° Spraying Unit (for liquid release agent) EDGE BANDING SECTION (for each side): Gluing Unit (Hot Melt Adhesive + Pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Preheating Unit RP 10 Edge Pressure Zone (CNC-controlled) Pressure Roller Track (revolver) for Straight Edges and Softforming (softforming) Soft PF40 (4 Pos.) mm 800 (Guillotine CI10+CS10+RL10) - Edge Magazine for Rolls (6 positions) Milling Unit RS 10 (2 x 1.3 kW) Milling Unit Softforming RF 10/SF (2 x 0.65 kW) Multi-profile Milling Unit RF 30 (2 x 0.65 kW) Universal Milling Unit for Grooving/Rebating and Profiling FB 30 (2 x 4.5 kW) 0° - 90° Multi-profile Scraper Unit RB 30 Flat Scraper Unit RC 05 / Soft Spraying Units (for polishing liquid) + Buffing Unit SZ 30 (2 x 0.37 kW)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE "SOFTFORMING" - Min/max edge thickness (roll material) mm 0.3 - 3 - Min/max edge thickness (strip material) mm 0.4 - 12 - Min/Max. workpiece thickness mm 12-60 - Control system: Power Control PC 22 - Feed speed (variable) m/min 12 - 24 - Top pressure with a motorized V-belt - Gluing unit (hot-melt adhesive and pre-melting unit): QE 34 / E12 - Pressure roller track (revolver system) for flat and shaped panels (softforming) - Single-roll magazine - End trimming unit HL 84 (2 x 0.84 kW – 12,000 rpm) Godpfjfd Ilyex Adqskc - Fine trimming unit (2 x 1.5 kW – 12,000 rpm) - Milling unit (2 x 0.4 kW – 12,000 rpm) OPTIONAL: Infeed system with extended entry and 3-wheel motorized rubber top

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a line) Edge thickness in rolls (min/max) mm: 0.3 – 3 Edge thickness in strips/bands (min/max) mm: 0.4 – 12 Panel thickness (min/max) mm: 8 – 100 Working width (min/max) mm: 240 – 3000 Control system: Power Control PC22 (Windows XP) Software: woodCommander Feed speed (adjustable) (m/min): 10 – 40 Safety and soundproof cabins Gjdpfx Adjtt Iudsqjkc Retractable positioning pins, distance (mm): 400 FORMATTING UNIT (per side): Jointing milling unit (2 x 6.6 kW) Spare station Left only: 2 x universal milling units (rotatable) (2 x 6.6 kW) EDGE BANDING SECTION (per side): Gluing unit (Hot Melt glue + pre-melter) E34 Pressure roller track (revolver style) for straight and shaped (softforming) edges, GL sextuple Edge magazine for rolls (No 1 compartment) End trimming unit WK14 (2 x 0.8 kW) 25 m/min (0°–30°) Milling unit (2 x 0.55 kW) 0°–30° Contour copying unit FF12 (4 motors) WD70 20 m/min Profile scraping unit PN20 Finishing unit (flat scraper + buffing unit) FA11