Mesin pengikat tepi satu sisi

BIESSE STREAM B1 9.0

Kondisi: baik (bekas), Tahun pembuatan: 2002, Edge banding machine with jointing milling, otherwise fully equipped, PU adhesive can be used. Dksdpjgmn H Aofx Acvsi

Kondisi: baru, de_Bester Preis 4499 EUR (EXW Jonava, Litauen) Abmessung des Schiebetisches: 2200 x 375 mm Max. Schnittkapazität: 1500 mm Schnittbreite zwischen Sägeblatt und Parallelanschlag: 1140 mm Sägeblattdurchmesser: 400 mm Schnitthöhe (90°): 115 mm Schnitthöhe (45°): 105 mm Drehzahl der Hauptsäge: 4500/6000 U/min Durchmesser der Hauptspindel: 30 mm Sägeblatt schwenkbar: 0-45° Dkjdsdnxydspfx Acvoi Elektrisch gesteuerte Sägeblatthebung/-senkung Hauptmotor: 5,5 kW Vorritzsägeblatt-Durchmesser: 120 mm Drehzahl der Vorritzsäge: 7000-8000 U/min Vorritzsägendurchmesser (Achse): 20 mm Vorritzmotor: 1,1 kW Gewicht: 700 kg * Bei Verwendung des 400-mm-Sägeblatts muss das kleinere entfernt werden. Ein reduziertes Sägeblatt darf nur mit einer maximalen Hauptschutzabdeckung von 350 mm verwendet werden.

Kondisi: sangat baik (bekas), Four-sided planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm Dkodpfx Ajrigxyjcvji 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor: 4 kW Fully adjustable heads Electrically adjustable planing height and width Spindle diameter: 40 mm Feed via cardan shaft rollers, stepless adjustment Robust planer by WEINIG Machine length: 415 cm The machine has been inspected and is in original condition

Kondisi: bekas, Tahun pembuatan: 2015, NC 1000 numerical control, Biesse Works Advanced software Working area in X-axis: 4300 mm – X-axis travel: 5365 mm Working area in Y-axis: 2205 mm – Y-axis travel: 2749 mm Z-axis working stroke: 160 mm – Z-axis travel: 385 mm FT nesting full-plane worktable Automatic loading system with side lift table Automatic labeling unit for barcode printing Automatic print-and-apply system for adhesive labels No. 1 vertical electrospindle preset for 4-axis machining (C-axis vector), with automatic tool change, HSK F63, 12 kW, including flange for aggregate use Knife unit integrated in the drilling head on X-axis – diameter 120 mm Automatic tool changer with 8 positions – mounted on the machine operating head Automatic tool changer with 21 positions – positioned at the rear of the machine with chain Drilling unit BH 40 L with independent spindles arranged as follows: - No. 17 vertical in X-axis - No. 12 vertical in Y-axis - No. 6 horizontal in X-axis - No. 4 horizontal in Y-axis Automatic unloading system with motorized belt Dksdpjwt Snyefx Acvsi Front safety and protection system with mats and safety nets Automatic lubrication system Air conditioning unit for the electrical cabinet No. 2 vacuum pumps, each 250 m³/h

Kondisi: baru, Tahun pembuatan: 2022, New machine Dedjw I Uxcjpfx Acvski Year of manufacture: 2022 Standard equipment: - Electrically adjustable height and tilt (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length: 3,000 mm - Manual parallel fence adjustable via measuring scale, including manual fine adjustment, cutting width 1,000 mm - Angle fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Maximum saw blade projection: 150 mm - Maximum saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) with 4,000 rpm - AKE tool clamping system for the main saw blade - Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Infinitely variable speed adjustment from 2,000–6,000 rpm - Precise speed adaptation to the material increases both cutting quality and saw blade life Extended cutting height for single-sided tilt This option is designed for single-sided tilt with a large extraction hood for a maximum saw blade diameter of 550 mm and a maximum blade projection of 204 mm. In combination with a scoring unit, the maximum saw blade diameter is 500 mm and cutting height is 179 mm. Available only with at least 5.5 kW (7.5 HP) drive power. 2-axis scoring unit, single-sided tilt - With electric height and lateral adjustment, scoring blade height programmable with quick lowering and raising, drive motor 0.75 kW (1 HP), 8,200 rpm. Retrofitting possible only on machines prepared for a scoring unit. LED lighting - Particularly energy-efficient LED technology clearly marks the hazardous area of the scorer. The Altendorf double roller carriage is renowned for its smooth operation and precision running. It is infinitely lockable in any position. The large double rollers, precisely manufactured from hardened steel, keep the upper carriage absolutely aligned with the lower carriage via the hard-chromed guide bars. This running quality is maintained even after decades of use and contamination. The carriage design is an extremely torsion- and shape-resistant multi-chamber system. The table surface is precisely planed and anodized. A hard-chromed round bar, precisely fitted into the upper carriage, serves as a mount for the cross slide and as a connection point for various accessories. The entire unit is low-maintenance and requires no lubrication. On/off switch on the double roller carriage - The on/off switch on the double roller carriage is always within easy reach. The four buttons control the main saw blade and the scorer. This saves steps and increases safety. Mitre fence, crosscutting up to 3,500 mm - This patented ALTENDORF fence with integrated length compensation enables precise cutting of angles and mitres in one operation. In both positions, the swivel angle is infinitely adjustable by up to 49° and shown on a measuring scale. The play-free and robust flip stops can be easily moved and set as single stops over the complete range up to max. 3,500 mm.

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), I am selling a complete window manufacturing set: - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profiling and overlay centre Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI - Available immediately - Total price: 17,000 EUR Dodsfzzhyepfx Acvoki - Condition: very good

Kondisi: baru, Dimensions (LxWxH): 2480 x 1230 x 65 to 105 Width: 1230 mm Length: 2480 mm Weight approx.: 675 kg Welding and assembly tables of the SMT flex series are robust, height-adjustable, and practical workstations designed for handling heavy workpieces, using power tools, or working with chemical or oily substances. Thanks to transport bars integrated into the footrests, the tables can be easily moved with a pallet truck and quickly adjusted in height to match other work levels. The height adjustment range is from 650 mm to 1,050 mm (lower working heights available upon request). The solid steel worktop, up to 20 mm thick, can easily withstand heavy impacts or blows, such as those encountered when working with heavy hand tools or handling very large metal workpieces or tools, without causing permanent deformation or indentations. The metallic work surface allows unrestricted use of magnetic clamps for securing components. Due to its substantial weight, this universally applicable table also provides excellent stability and tipping resistance even at its maximum height, when supporting heavy objects or tools. Dsdofk Ah Nopfx Acvjki For accessories and further information, please follow this link:

Kondisi: bekas, Tahun pembuatan: 2004, Used machine Year of manufacture: 2004 Dkodpfx Acjvymdqsvoi Equipment and technical data: Edge feed for coil and strip material Jointing milling unit with 2 milling heads Cartridge glue application system 3-roller pressure unit End trimming saw unit Radius milling unit Radius scraper unit Corner rounding unit Flat scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edgebanding thickness: 0.4-15 mm Maximum edgebanding height: 55 mm Minimum strip edgebanding length: 350 mm Maximum edge overhang per side: 3 mm Minimum workpiece width: 60 mm Minimum workpiece length: 180 mm Feed speed: 12.5 m/min. Machine dimensions (L x W x H): 6,480 x 1,250 x 1,690 mm Availability: short notice Location: Flörsheim

Kondisi: sangat baik (bekas), Four-sided Planer / Four-Side Moulder Dksdpfxet Dk Rxo Acvsi Model: Compact 23 Max. working width: 230 mm Max. working height: 125 mm Max. profile tool diameter: 180 mm Surfacing spindle: 4 kW Vertical spindle: 5.5 kW Top horizontal spindle: 4 kW Bottom horizontal spindle: 4 kW Machine dimensions: 3200 x 1400 x 1600 mm Weight: 1850 kg

Kondisi: bekas, Leitz HM - IV 66 window set with mullion and front door fittings Djdpfx Acjhzgy Nevoki Sold in "as is" condition, tools have not been re-sharpened, located in Seevetal, without transport, subject to prior sale,