MELALUI MESIN BORING

BIESSE TECHNO FDT

Kondisi: bekas, nomor mesin/kendaraan: 007805, max-breite-panel-3200-laenge-1200-aggregate-6-4-nc-steuerung-sei tlich Guodex A E Suepfx Aaboa

Kondisi: bekas, Tahun pembuatan: 2015, NC 1000 numerical control, Biesse Works Advanced software Working area in X-axis: 4300 mm – X-axis travel: 5365 mm Working area in Y-axis: 2205 mm – Y-axis travel: 2749 mm Z-axis working stroke: 160 mm – Z-axis travel: 385 mm FT nesting full-plane worktable Automatic loading system with side lift table Automatic labeling unit for barcode printing Automatic print-and-apply system for adhesive labels No. 1 vertical electrospindle preset for 4-axis machining (C-axis vector), with automatic tool change, HSK F63, 12 kW, including flange for aggregate use Knife unit integrated in the drilling head on X-axis – diameter 120 mm Automatic tool changer with 8 positions – mounted on the machine operating head Automatic tool changer with 21 positions – positioned at the rear of the machine with chain Drilling unit BH 40 L with independent spindles arranged as follows: - No. 17 vertical in X-axis - No. 12 vertical in Y-axis - No. 6 horizontal in X-axis - No. 4 horizontal in Y-axis Automatic unloading system with motorized belt Front safety and protection system with mats and safety nets Automatic lubrication system Air conditioning unit for the electrical cabinet Gjdpfx Ajwt Snyjabeua No. 2 vacuum pumps, each 250 m³/h

Kondisi: sangat baik (bekas), Electronic machine, CNC-controlled, PC control type NC 500 – Software Tooling System. No. 2 motorized through-feed conveyor belts – feed speed (m/min) approx. 35 – 75. Max. working width (mm) 3200 – min. working width (mm) 215 No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support (11 spindles per drilling unit) No. 5 lower vertical drilling supports Drilling units for each lower vertical drilling support (No.) 2 x 1.8 HP No. 2 upper vertical drilling supports Spindles per drilling unit of upper drilling supports (No.) 2 x 1.8 HP No. 4 upper vertical workpiece clamps. No. 2 screws (endless) for chip removal Digital display of positional data (axis). Total connected load (kW) 62.7 Gedpfx Aajyyw S Rebsua CNC controls the movement (X-axis) of horizontal drilling supports CNC controls the movement (Hv) of the 2 horizontal drilling supports CNC controls the movement (axis X) of vertical drilling supports CNC controls the movement (axis Y1 and Y2) of the drilling units CNC controls the movement (axis Y) of the stops CNC controls the movement (axis X) of the workpiece clamps CNC controls the movement (axis X) of the conveyor belts The CNC control manages the complete programming of automatic work cycles

Kondisi: sangat baik (bekas), de2hu-001 Guodpfjyvrrqex Aabja

Kondisi: bekas, Tahun pembuatan: 2013, Venjakob Perfect Spray Coating Line: - Manufacturer: Venjakob - Year of manufacture: 2013 Gsdpfxsu Afu Ro Aaboua - Working width: 1,300 mm - Max. workpiece length: 6,500 mm - U-shaped configuration with 180° transfer Comprising: 1. Infeed conveyor, length 3,050 mm 2. Space for sanding machine (optional) 3. VEN SPRAY PERFECT automatic spray machine, length 5,510 mm 4. Flash-off dryer OIR, length 6,000 mm 5. VEN DRY AIR JET nozzle dryer, length 4,160 mm 6. 180° transfer station with nozzle dryer 7. Fresh air supply unit for transfer station, 25,000 m³/h 8. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 IR emitters 9. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 IR emitters 10. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 IR emitters 11. 3D UV dryer, VEN DRY UV, GA + HG 12. Discharge section, belt from UV dryer 13. Hall supply air unit, 30,000 m³/h Further information: On request

Kondisi: sangat baik (bekas), NC 400 electronic programmer Throughfeed motorised conveyor belts (qty): 2 Gedpfslwqrtsx Aaboua Horizontal drilling supports (qty): 2 Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Upper vertical workpiece clamps (qty): 4 Continuous screws for chip removal (qty): 2 Digital display of position data (axis) Total connected load (kW): 27.7 The CNC control monitors the movement (X-axis) of the horizontal drilling supports The CNC control monitors the movement (Y-axis) of the stops The CNC controls the movement (Z-axis) of all vertical drilling supports

Kondisi: diremajakan ulang (bekas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, with high-speed automatic handling equipment. Comprising the following machines: A) FEEDING STATION "RBO" Winner C 3200 with double pick-up and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for in-feeding panel stacks to the loader. B) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° C) 1st AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units Gedpfx Aaedfgg Ijbeua D) 2nd AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units E) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° G) STACKING STATION "RBO" Winner SC 3200 with double pick-up, double stacking station, and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for out-feeding panel stacks from the unloader.

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 265864, diameter pembubutan: 350 mm, kecepatan spindel (maks.): 5.000 rpm, kecepatan spindel (min.): 35 rpm, jarak pergerakan sumbu X: 195 mm, jarak gerak sumbu Z: 560 mm, daya motor spindle: 15 W, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan sumbu Z: 33 m/menit, torsi: 233 Nm, jarak dari tengah meja ke hidung spindel: 687 mm, Perlengkapan: dokumentasi / manual, Mazatrol Smart-Steuerung. Spindeldrehzahl: 5.000 min⁻¹. Verfahrweg X/Z: 195 mm / 560 mm. Guedpfx Aasvfm H Aobsa Ausgestattet mit einem Spannfutter, Ø 215 mm. 3-Backen-Kraftspannfutter. 12-fach Revolver. Reitstock. Werkzeugvermessung. Teilefänger.

Kondisi: sangat baik (bekas), CNC-controlled (automatic) through-feed drilling line, consisting of: Godpot Ig A Sefx Aaboua W05022F) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - 2 horizontal drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and each with 11 drilling spindles); - 6 lower drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and with various drilling heads per carriage); - 3 upper drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and with various drilling heads per carriage); - 5 upper vertical workpiece clamps + 2 continuous augers for chip extraction CNC control NC 500 (software: Tooling System + Woodmaster) W05022G) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - 2 horizontal drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and each with 11 drilling spindles); - 6 lower drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and with various drilling heads per carriage); - 3 upper drilling carriages (each equipped with drilling heads, each 1.8 kW and with various drilling heads per carriage); - 5 upper vertical workpiece clamps - 2 continuous augers for chip extraction 2nd drilling machine connected to the NC of the 1st machine.

Kondisi: sangat baik (bekas), PC control type NC 400 (software) Through-feed motorized conveyor belts (qty.) 2 Horizontal drilling supports (qty.) 2 Drilling units per horizontal drilling support (qty.) 2 Guodpfxsgk T Tts Aabsa Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 Upper vertical drilling supports (qty.) 4 Spindles per unit of upper drilling support (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous (endless) screws for chip removal (qty.) 2 Digital display of position data (axis) Total connected load (kW) 48 The CNC control monitors the movement (X-axis) of the horizontal drilling supports The CNC control monitors the movement (Y-axis) of the stops

Kondisi: bekas, SPE Renergi Niedertemperatur-Trockner Der Renergi Trockner wird zur Trocknung von Sägemehl und anderen Materialien zur Herstellung von Biokraftstoffen eingesetzt. Der Trockner kann Sägemehl, Rinde oder Hackschnitzel von einem Feuchtigkeitsgehalt von ca. 50 % auf einen Wert von etwa 10 % trocknen. Dieser Niedertemperatur-Trockner nutzt Warmwasser (oder Heißwasser) ab einer empfohlenen Temperatur von 65 °C. Die maximale Wassertemperatur beträgt 110 °C. Netzanschlusssicherheit: Der Trockner darf ausschließlich mit 3x400 V AC (630 A) 50/60 Hz und einer separaten Schutzleiterzuleitung betrieben werden. Netzanschluss-Daten: • Spannung: 400 V AC, Drehstrom • Empfohlene Absicherung in der Zuleitung: maximal 3x630 A • Typischer Stromverbrauch: 200 kW Die Abmessungen des Trockners betragen ca. 17,4 x 5,7 Meter, bei einer Höhe von 10,7 Metern. Die erforderliche Stellfläche beträgt etwa 21,4 x 8,0 Meter. Die Mindestdeckenhöhe sollte 15 Meter betragen (bzw. mindestens 4 Meter über dem Einlauf des Mediums). Luftzufuhr: Für den Betrieb dieser Anlage ist eine Frischluftmenge von mindestens 24 kg Gas/s erforderlich, was 20 Nm³/s oder 72.000 Nm³/h entspricht. Luftdurchsatz: max. 200 Liter/min Luftdruck: mindestens 4,5 bar, empfohlen 6,0-8,0 bar Wasserversorgung: Heißwasserzufuhr mit einem Durchfluss von 32 dm³/s. Wasserdruck: min. 1,5 bar, max. 6,0 bar Betriebstemperaturbereich: • Zulufttemperatur: -20 °C bis 50 °C • Relative Luftfeuchtigkeit: 0 % bis 60 % Rohmaterial/Medium: • Ausgangs-Feuchtigkeit: 45 % bis 55 % (Gewichtsprozent) • Ziel-Feuchtigkeit: 8 % bis 15 % im getrockneten Material Kapazität: • Der Zwei-Kammer-Trockner mit 4 m Breite verarbeitet typischerweise 2.400 kg Material mit 55 % Feuchtigkeitsgehalt pro Charge • Der Trockner kann 6.000 kg Rohmaterial mit einem Feuchtigkeitsgehalt von 55 % auf 10 % in etwa einer Stunde trocknen Der Trockner von SRE ist nach den europäischen Richtlinien konstruiert. Die Anlage erfüllt die grundlegenden Anforderungen der: • Maschinenrichtlinie 2006/42/EG • Niederspannungsrichtlinie (LVD) 2006/95/EG • EMV-Richtlinie 2004/108/EG Der Trockner befindet sich in der Gemeinde Straupe, Bezirk Cēsis, LV-4152, Lettland. Besichtigung an Werktagen von 08:00 bis 17:00 Uhr nach vorheriger Terminvereinbarung möglich. Der Trockner ist bereits demontiert. Sämtliche Elektropläne, Handbuch und Bedienungsanleitungen sind vorhanden. Gjdpfx Aajwp Rqfobsua Auf Wunsch kann ein Ansprechpartner mit Erfahrung im Betrieb dieses Trocknertyps zur Beratung vermittelt werden. Preis: 20.000,00 EUR (zzgl. MwSt.)

Kondisi: sangat baik (bekas), PC control type NC 400 No. 2 Pass-through motorized conveyor belts No. 2 Horizontal drilling supports No. 2 Drilling units per each horizontal drilling support Spindles per each horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 5 Lower vertical drilling supports No. 2 Drilling units for each lower vertical drilling support No. 2 Upper vertical drilling supports No. 2 Spindles for each drilling unit of upper drilling supports No. 4 Upper vertical workpiece clamps Chip removal conveyor Gjdpfx Asidqd Tsaboua Digital display of position data (axis) Total connected load (kW): 59.1 The CNC control monitors the movement (X-axis) of the horizontal drilling supports. The CNC control monitors the movement (Y-axis) of the stops. The CNC controls the movement (X-axis) of the conveyor belts.

Kondisi: sangat baik (bekas), PC control type NC 400 No. 2 through-feed motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support Spindles per horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 6 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles per drilling unit of the upper drilling supports Gedpsidqf Refx Aaboua No. 5 upper vertical workpiece clamps Chip removal conveyor belt Digital display of position data (axis) Total connected load (kW): 59.1 The CNC control regulates the movement (X-axis) of the horizontal drilling supports. The CNC control regulates the movement (Y-axis) of the stops. The CNC controls the movement (X-axis) of the transport belts.

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, NC-controlled drilling and dowel insertion machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: Max. length 600 mm Configuration: - Horizontal drilling unit with 3 individually selectable spindles, spindle spacing 32 mm - 1 dowel insertion unit (spaced 32 mm from the first drill spindle) - Glue nozzle with adjustable glue dosage - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel dimensions: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel supply 1. BASE MACHINE - Robust steel frame construction - Axis movement in X, Y, and Z directions - Ball screw drive (Y and Z axes) and rack-and-pinion drive (X axis) - Digital AC servo motor - Support table with left and right side fences as well as rear fence rail - Pneumatically lowerable center stop, manually controlled via selector switch - 6 top hold-down cylinders, manually adjustable Guodpfsxdl Rajx Aaboa - Central lubrication Power control PC85T Modern control system based on Windows PC

Kondisi: bekas, Complete factory for furniture manufacturing, comprising: SZ0M23) Angular panel saw "GIBEN" Type 17 (5700x2700 mm) with "SIRIO" stacking system SZ0M25) Panel saw "GIBEN" Mod. GammaDue (3800x2200 mm) SZ0M26) Panel saw (multi-blade) "GABBIANI" (finished panels 4250 x 2120 mm) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (paper glue application) SZ0M29) Press line "COLOMBO REMO" (1400x9600 mm) for paper / veneer / laminated Gusdpfx Aocr U Uroabsa SZ0M30) Press line "FRIZ" (1400x6200 mm) for paper / veneer / laminated SZ0M41) Double-sided sizing and edge banding line "IMA" Combima with high-speed automatic handling "RBO-BIESSE" SZ0M42) Double-sided sizing and edge banding line "IMA" Combima Softforming with second double-sided sizing and edge banding machine "STEFANI" and "TOMASSINI" handling. SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Mod. KAL 310 with "NARDELLO" Mod. Elegance splitter. SZ0M35-36) Drilling machine "BIESSE" Techno Logic with infeed and stacker "TOMASSINI" SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling "RBO-BIESSE" SZ0M37) CNC machining centre "MORBIDELLI" Mod. Author 600 KL SZ0M56) Reel slitting and rewinding machines "CEFLA-DUSPOHL" Type RSW 2200 T SZ0M01) Cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" SZ0M07) Cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" SZ0M08) Cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" SZ0M11-17) Honeycomb panel preparation line SZ0M18) No. 6 multi-daylight press "COLOMBO REMO" (mm??x mm ??). SZ0M21) Sizing and calibration line for honeycomb panels "GABBIANI + CELASCHI + ELMAG + COSTA LEVIGATRICI" Various other machines (VITAP drilling machine, circular saws, glue application machines, etc.), extraction system, roller conveyors, shelving (wall racks), forklift trucks, pallet trucks, and more. The machines are still installed at the user and can be inspected by arrangement.