FORMAT DAN TEPI PITA BERLIAN IMITASI BENTUK LUNAK

BIESSE + RBO Stream SB softforming + FDT CN + Winner

Kondisi: bekas, Tahun pembuatan: 2015, NC 1000 numerical control, Biesse Works Advanced software Working area in X-axis: 4300 mm – X-axis travel: 5365 mm Working area in Y-axis: 2205 mm – Y-axis travel: 2749 mm Z-axis working stroke: 160 mm – Z-axis travel: 385 mm FT nesting full-plane worktable Automatic loading system with side lift table Automatic labeling unit for barcode printing Automatic print-and-apply system for adhesive labels No. 1 vertical electrospindle preset for 4-axis machining (C-axis vector), with automatic tool change, HSK F63, 12 kW, including flange for aggregate use Knife unit integrated in the drilling head on X-axis – diameter 120 mm Automatic tool changer with 8 positions – mounted on the machine operating head Automatic tool changer with 21 positions – positioned at the rear of the machine with chain Drilling unit BH 40 L with independent spindles arranged as follows: - No. 17 vertical in X-axis - No. 12 vertical in Y-axis - No. 6 horizontal in X-axis - No. 4 horizontal in Y-axis Automatic unloading system with motorized belt Hsdowt Snyjpfx Aabsff Front safety and protection system with mats and safety nets Automatic lubrication system Air conditioning unit for the electrical cabinet No. 2 vacuum pumps, each 250 m³/h

Kondisi: baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, System comprising: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM • Max. cutting length: 4,500 mm • Max. main saw blade projection: 95 mm • Max. opening of clamping grippers: 90 mm • Min. panel dimensions (from rear): 1,830 x 915 mm • Max. panel dimensions (from rear): 3,100 x 2,200 mm • Min. panel thickness for rear feeding: 3 mm • Worktable height: 985 mm • Main saw motor: 15 kW • Main saw blade diameter: 380 mm • Scoring saw motor: 2.2 kW • Scoring saw blade diameter: 200 mm • DIGISET: electronic adjustment from scoring to main saw • QUICK CHANGE: fast saw blade change at the push of a button • Saw carriage drive: 1–140 m/min • Integrated side aligner in saw carriage: 0–4,200 mm • Automatic measuring system for manual cuts • Pusher extension from 5,500 to 7,800 mm • 10 pneumatic double-finger grippers on the pusher • 3 front aligners • 16 support roller rails behind the machine table • 4 rounded air cushion tables in front of the machine table, incl. movement device for table 2 • Automatic ejection of end pieces beyond the cutting line Hfjdpfsxranpox Aabjf • Material support surface under the pusher with brush-mounted rollers, designed for sensitive surfaces • Machine table with air jets for sensitive surfaces • Automatic device for main saw blade monitoring consisting of a sensor measuring saw blade deflection and a system for monitoring the main spindle speed Software package: — QUICKOPTI for cut plan optimization directly on the machine — VERSION OSI PLUS INTERFACE — OPTIPLANNING OPTIMIZATION SOFTWARE, incl. hardware dongle, enabling management of up to 10 network users — OS LABELLING: Graphical editor on the machine control with part drawing; real-time label printing on the machine possible — COMMUNICATION BETWEEN STORE FEED SYSTEM AND SELCO • Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8,000 mm • Rotatable suction frame 0–180° with controlled axis • Panel alignment/squaring system with 3 photocells mounted on pneumatic cylinders • Panel weight detection via load cell mounted on suction frame in the separation area; checks if panel weight is within expected range for the panel type. If not, the panel is returned and the separation cycle restarts. • Roller conveyor for stack infeed and outfeed: 4,200 mm Software: — LINE SUPERVISOR with warehouse mapping and catalog, import of processing data from optimizer, bill of materials management, and system control.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Löser centreless tube grinding machine – belt grinding machine – centreless tube polishing machine – cylindrical grinding machine Centreless tube grinding / polishing machine for workpieces with a minimum length of 1100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing and has since processed approximately 10,000 parts. Afterward, the machine was no longer used. As part of the general overhaul, the motors, bearings, and the entire control cabinet including frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not currently included. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations will also need to be adapted and retrofitted to match your workpieces. Hfodpfx Aopugwisabsf The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power rating of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Kondisi: bekas, nomor mesin/kendaraan: 006370, Type of attached edge: thin edge, thick edge Hfodpfx Ajl Txw Hjabsf Adhesive system: EVA Jointing milling: yes Multifunction unit: yes Top milling unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 12 pcs

Tahun pembuatan: 1980, Kondisi: baik (bekas), 22501 Technical data (approx.): - Max. working width: 1020 mm - Max. material thickness at 40 kg/mm² tensile strength: 1.5 mm - Manual back gauge adjustable up to: 550 mm Hfjdpfx Aaskzik Hjbjf - Front angle stop - Sheet holding device - Table size: 1100 x 650 mm - Working height: 900 mm - Required floor space (approx.): W 1800 x H 1450 x D 850 mm - Weight (approx.): 400 kg - Mobile

Kondisi: diremajakan ulang (bekas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, with high-speed automatic handling equipment. Comprising the following machines: A) FEEDING STATION "RBO" Winner C 3200 with double pick-up and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for in-feeding panel stacks to the loader. B) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° C) 1st AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units Hodpfx Aasdfgg Isbsff D) 2nd AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units E) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° G) STACKING STATION "RBO" Winner SC 3200 with double pick-up, double stacking station, and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for out-feeding panel stacks from the unloader.

Kondisi: baru, Tahun pembuatan: 2025, Rollformmaschine für Metallsiding "Doppel-Fassadenpaneel" SPM-2 Die Rollformmaschine für Metallsiding "Doppel-Fassadenpaneel" SPM-2 ist eine Neuentwicklung unseres Unternehmens zur Herstellung von Fassaden- und Wandpaneelen aus Metall mit der jeweils erforderlichen Konfiguration. Diese Doppel-Fassadenpaneele sind im Bauwesen äußerst beliebt und werden zur Verkleidung von Wohngebäuden und Industrieanlagen, für die Errichtung von Zäunen in verschiedenen Ausführungen, Pavillons, Dachelementen usw. eingesetzt. Die Metallsiding-Produktionslinie SPM-2 ist vollautomatisch und besteht aus einem Rollenteil, einer Automatisierungseinheit und einer Guillotine-Schere am Ausgang der Maschine. Je nach Kundenwunsch kann die Linie um einen manuellen oder automatischen Abwickler für Metallcoils erweitert werden. In der Standardausführung produziert die Rollformmaschine SPM-2 flache Doppel-Fassadenpaneele, optional können durch Zusatzgeräte jedoch auch Paneele mit Mikroprofilierung oder Sickenprofil hergestellt werden. Für den Produktionsstart wird ein Metallcoil auf den Abwickler gesetzt und das Bandende in die ersten Umformwalzen der Maschine eingeführt. Schrittweise wird das Metall durch die weiteren Walzen geführt und bei Bedarf ausgerichtet. Hjdpfx Aoxghngoabjff Sobald das Metall zum Schneidwerkzeug gelangt, wird das Band in die Messereinheit eingeführt und ein "Nullschnitt" durchgeführt. Anschließend kann die Maschine in den Automatikbetrieb wechseln. Über das Bedienfeld lassen sich Auftragsmengen, Produktlängen (Einzelbearbeitung oder Mehrfach-Modi) einstellen. Nach Einstellung der gewünschten Parameter fertigt die Maschine die Wandverkleidungspaneele automatisch und schneidet sie direkt auf Maß. So erhält der Kunde die Endprodukte schnell und in höchster Qualität. Die Rollformgeschwindigkeit ist variabel und beträgt bis zu 10-15 Meter pro Minute. Die SPM-2 Produktionslinie für Metallverkleidungspaneele verfügt über spezielle Stanzvorrichtungen für Befestigungslöcher an der Paneelseite. Somit kann der Kunde ein breiteres und attraktiveres Produktportfolio anbieten. Der Rollenteil der Maschine umfasst 18 Walzenpaare, die höchste Produktqualität gewährleisten. Die Maschine ist wahlweise mit oder ohne Schutzverkleidung lieferbar. Technische Daten: Materialbreite (mm): 416 Materialstärke (mm): 0,4-0,5 Motorleistung (kW): 3 + 1,1 Rollformgeschwindigkeit (m/min): 10-15

Kondisi: sangat baik (bekas), DOUBLE-SIDED FEEDING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (with carriage gliding on it) No. 1 motorized carriage with horizontal metal arms Hodsfi Tg Hepfx Aabjff External roller conveyor (on the floor) for feeding stacks of panels to the feeding station External motorized roller conveyor (receiving panels from the feeding station) Separate electrical control panel Perimeter safety fencing with safety mats Operating capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Minimum panel dimensions mm 250 x 320 (approx.) Maximum panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 710 mm, panjang pembubutan: 3.000 mm, Mesin Bubut Universal FAT Polandia Model: TUR 710 x 3000 Tahun Pembuatan: 1996 Aksesoris: Tampilan digital Chuck 3 Rahang Pemegang alat Lunette Hsdpfx Aajxxm A Hjbeff Mata senter

Tahun pembuatan: 2017, Kondisi: siap digunakan (bekas), A spinning, drawing, and winding system for the production of monofilament yarn, multifilament FDY, and POY is available. Number of spinning positions: 24; yarn ends: 192; drawing: cold and heated godets; doffing: without yarn breakage; number of godets heated/cold: 50/50; number of winders: 24 (+2 reserve winders). Includes various spare parts for the machine and electronics. Documentation is available. An on-site inspection is possible. Hjdpfx Ajuanq Tsabeff