Ruang iklim Binder MKF 720

Binder MKF 720

Kondisi: sangat baik (bekas), Binder Model: MKF 720 E3.1 Temperature Cycling Climate Chamber Air-cooled Temperature range: -40°C to +180°C Humidity range: 10% rH to 98% rH The MKF temperature cycling climate chamber is a specially developed environmental simulation chamber designed for industrial material testing and environmental simulation applications, offering unparalleled performance far exceeding the capabilities of standard heating chambers. It is capable of handling all tasks required for material testing as well as aging and stress tests. TECHNICAL DATA: Housing dimensions: Width: 1615 mm Height: 2005 mm Depth: 1230 mm Internal dimensions: Width: 1200 mm Height: 1020 mm Depth: 600 mm Internal volume: 734 liters Net device weight (empty): 590 kg Maximum total load: 160 kg Maximum load per shelf: 40 kg Performance Data — Temperature: Temperature range: -40°C...180°C Temporal temperature fluctuation: 0.1...0.5 ± K Spatial temperature deviation: 0.1...1.8 ± K Average heating rate according to IEC 60068-3-5: 4.8 K/min Average cooling rate according to IEC 60068-3-5: 4.8 K/min Max. heat compensation: 6500 W Performance Data — Climate: Temperature range: 10...95°C Humidity range: 10...98% rH Temporal temperature fluctuation depending on setpoint: 0.2...1.5 ± K Max. heat compensation: 1000 W Electrical Data: Ncjdeymcqdspfx Adnsn Rated voltage: 400V 3N~ ±10% 50Hz Rated power: 11 kW 19.2 A Refrigerant: R404A 5 kg Important Notice: “The table shown in the photos is not included in the sale.” Safety information for buyers: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and data subject to change and errors!) For further questions, we are happy to assist you by phone.

Kondisi: bekas, Tahun pembuatan: 2008, x-travel 450 mm y-travel 400 mm z-travel 400 mm Control system: Heidenhain Mill Plus V600 Machine weight: approx. 7000 kg 24,000 rpm 16x HSK63A tool changer 40 bar internal coolant supply Nodpfx Aowgi Drednscn 250 liter coolant tank Chip conveyor

Kondisi: baik (bekas), Technical Data – DECKEL MAHO DMU 70 eVo linear Manufacturer / Model DECKEL MAHO (DMG MORI) DMU 70 eVo linear Control Heidenhain iTNC 530 Machine Concept 5-axis universal machining center (simultaneous 5-axis machining possible) Axes / Travels X / Y / Z: n.a. (to be confirmed) A / B (swivel/rotary table): n.a. (to be confirmed) Rapid traverse rates: n.a. (to be confirmed) Table / Working Area Table size: 700 × 500 mm Table load capacity: n.a. (to be confirmed) Max. workpiece dimensions: n.a. (to be confirmed) Max. workpiece weight: n.a. (to be confirmed) Spindle Main spindle: motor spindle Spindle speed: 18,000 rpm Power / torque: n.a. (to be confirmed) Tool interface: HSK 63 Tool Changer / Magazine (ATC) Magazine capacity: 60 slots / 60 tools Tool change system: automatic Max. tool length / weight: n.a. (to be confirmed) Measuring Systems Tool measurement: BLUM laser tool measurement system Workpiece probe / touch system: BLUM probe (workpiece touch probe) Spindle / tool breakage control: n.a. (to be confirmed) Coolant / Chips Chip conveyor: available Chip management: Swarf Management System available High-pressure coolant system / coolant unit: available Tank capacity / filtration: n.a. (to be confirmed) Equipment / Options (as far as known) Front safety glass: has been replaced once Documentation: service history / reports available Year of Manufacture / History / Condition Year of manufacture: 2008 Installation / commissioning: 2009 Condition (currently): Machine is dirty, cleaning is recommended Visual condition: front safety glass already replaced Service / Maintenance DMG service history available (digital since approx. 2020) Machine has been regularly maintained (according to available service reports / information) Very good spindle care according to service documentation Geometry Data: Spindle alignment in X over a length of 400mm is 0.008mm, see image01-image02 Spindle alignment in Y over a length of 400mm is 0.009mm, see image03-image04 Flatness of X-guide over table length: 0.014mm, see image05-image06 Flatness of Y-guide over table length: 0.002mm, see image07-image08 Spindle runout at Z-400mm: 0.008, see video Additionally, the machine is Quickset prepared. Njdeyf Un Eepfx Adnocn

Kondisi: bekas, Tahun pembuatan: 2010, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Ncodpfx Ajxylqxjdnen Control Heidenhain iTNC 530 Tool holder SK 50 Number of tool stations 120 positions Connected load hours approx. 66,737 h Spindle hours approx. 36,316 h In our estimation, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Fully enclosed protective cabin with sliding doors and internal lighting - Setup station - Tool measurement in the working area with BLUM laser - 3D touch probe - Operating modes 3 + 4 - ICS 40 bar with 600 l tank and paper belt filter - Chip flushing gun with 1 bar/40 l pump - Chip conveyor - Brankamp monitoring system - 3-color signal light - Coolant ring nozzle - Blow-air cooling unit - Coolant unit - Oil/emulsion mist extraction system - Control cabinet cooler - Operating manuals Accessories, pictured tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Modifications and errors in the technical data and information as well as prior sale reserved!

Kondisi: baik (bekas), TS -70/1000-10 Type For sale: CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, Compressor has been replaced! Equipment: - Multi-touch control - USB and Ethernet interfaces - Feedthroughs for test cables 4 × Ø 125 mm - Safety temperature limiter Application areas: - Environmental and lifetime testing - Temperature cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, material testing Test chamber volume: 1,000 liters Internal dimensions: Ncedpfx Ajxdi Ezodnsn Height approx. 1,000 mm, width approx. 860 mm, depth approx. 1,100 mm External dimensions: Height approx. 1,950 mm, width approx. 1,270 mm, depth approx. 1,900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Nominal power: approx. 23.1 kW Nominal current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your safety as the buyer, please note! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data reserved!) We are happy to answer any further questions you may have by phone.

Kondisi: bekas, Tahun pembuatan: 2008, Translation from German into English: x-axis travel: 1000 mm y-axis travel: 1000 mm z-axis travel: 1000 mm Control system: Siemens 840D powerline Spindle speed: 8,000 rpm Drive power – main spindle 100/40% DC: 32/44 kW Tool holder: HSK-A 100 Number of tool stations: 354 pcs. Rapid traverse (x / y / z): 60 m/min Nedpfxjxcp R Us Adnecn Pallet size: 800 x 800 mm According to our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features: - NC rotary table with pallet carrier - Rotary pallet changer - ICS 40 bar (internal coolant supply at 40 bar) - Rotating viewing window - Wall-type magazine with 300 magazine positions - Tool sluice rotary wall, 30 positions (inactive), 54 positions (active) - Infrared probe - Tool breakage monitoring SK 50 mechanical version - Tool identification - 4-color signal lamp Accessories, illustrated tools, and clamping devices are only included in the delivery scope if specified in the additional information. Modifications and errors in the technical data and specifications as well as prior sale are reserved!

Tahun pembuatan: 2022, Kondisi: sangat baik (bekas), Dycometal Type: CCK -40/1500T Water-cooled climate chamber Volume: 1,500 liters Internal dimensions: Height 1,000 mm, Width 1,000 mm, Depth 1,500 mm External dimensions: Height 2,200 mm, Width 1,293 mm, Depth 3,400 mm Thermal testing Minimum temperature: -40°C Maximum temperature: +150°C Cooling rate: 2.0 K/min Heating rate: 3.5 K/min Temperature stability: ±0.1°C to ±0.3°C Temperature uniformity: ±0.5°C to ±1.5°C Climatic test temperature range: +10°C to +90°C Humidity range: 10% to 98% RH Ncedeu N Uugopfx Adnsn Dew point range: +6.5°C to +86°C Humidity stability: ±1% RH to ±3% RH Water-cooled condenser Rated voltage: 400 V 3N~PE 50 Hz Power: 16.1 kW, 27.5 A Refrigerant: R-452A Weight: 1,120 kg Condition: used Scope of delivery: (See picture) (Specifications may be subject to change and errors excepted!) For further questions, we will be pleased to answer you by phone.

Kondisi: bekas, Tahun pembuatan: 2001, de_to_hu_it_lt_001 Nsdpexu Nxvofx Adnjcn

Tahun pembuatan: 2016, jam operasional: 14.242 h, Kondisi: sangat baik (bekas), de Nedpfx Adet Txqrjnecn

Tahun pembuatan: 2016, jam operasional: 9.195 h, Kondisi: sangat baik (bekas), de_DE Ncjdst Txttspfx Adnen