Ruang iklim

Dycometal CCK -40/1500 T 1500 Liter

Kondisi: sangat baik (bekas), HT 7010 Type Heraeus Vötsch Temperature Test Chamber, Water-cooled Temporal Temperature Deviation: ± 1 K Spatial Temperature Deviation: ± 2 K Ledpfxshhyz Sj Agisrw External Dimensions: Width 820 mm x Depth 840 mm x Height 1670 mm Internal Chamber: Width 550 mm x Depth 350 mm x Height 550 mm Rated Voltage: 230V +6/-10% 1/N 50Hz Rated Power: 3.2 kW Rated Current: 14.5 A Temperature Range: -70°C to +180°C 2 x Side Ports, 9 cm diameter Weight: approx. 260 kg Refrigerants: R404A and R23 For your safety as a buyer, please note the following information! The following points are carried out on all chambers we offer prior to sale: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Tahun pembuatan: 2020, Kondisi: sangat baik (bekas), en001 Lrsdpfx Asw R Rt Iegiow

Kondisi: sangat baik (bekas), Vötsch Model: VC 7330/S Climate Chamber, Water-Cooled Lodpfxsu Au Erj Agierw Internal Volume: 3300 liters Specifications for Temperature Testing: Temperature Range: -70°C to +180°C Spatial Temperature Deviation: ±1 to ±2 K (corresponds to temperature gradient) (2 to 4) Temporal Temperature Fluctuation at Chamber Center: ±0.5 - 1 K Rate of Temperature Change (according to IEC 60068-3-5): Heating: 1.5 K/min Cooling: 1.5 K/min Specifications for Climatic Testing: Temperature Range: +10°C to +90°C Humidity Range: 10% r.h. to 98% r.h. Temporal Temperature Fluctuation: ±0.2 to -0.5 K Temporal Humidity Fluctuation: ±1% r.h. to ±3% r.h. Dew Point Range: +5°C to +89°C Mechanical Load Data: Test Chamber Floor Load Capacity: 150 kg Max. Chamber Floor Load: 250 kg Test Chamber Dimensions: Width 2000 mm x Depth 1150 mm x Height 1510 mm External Dimensions: Width 4000 mm x Depth 1450 mm x Height 2100 mm Operating Data: Test Chamber Illumination: Halogen bulb 12 V, 20 W Rated Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Power: 15 kW Rated Current: 34 A External control via RS 232 interface possible. Refrigerants: R404A / R23 Weight: 1550 kg For your security as a buyer, please note the following information! The following procedures are always performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), Weiss Model: WK 27'/50-150 Climate Test Chamber Water-cooled Technical Specifications: Test chamber designation: WK 27'/50-150 External dimensions: Height 3500 mm, Width 3400 mm, Depth 6000 mm Control cabinet dimensions: Height 2000 mm, Width 2400 mm, Depth 400 mm Internal dimensions: Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor load capacity: 30,000 N/m² (surface load) Test chamber volume: approx. 27,000 liters Specimen mass: 1000 kg Cooling / Heating operation: -50°C to 150°C Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Temperature constancy: ± 0.3 to 1.0 K (temporal) Temperature constancy: ± 0.1 to 0.5 K (temporal) Climate operation: 10 to 90°C Humidity: 10...98 % RH Temperature constancy: ± 0.1 to 0.5 K (temporal) Dew point range: +4 to +84 °C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Ljdpfx Agjvx Nfbeijrw Refrigerants: R23 and R404A Includes extra floor plates to increase floor load capacity For your security as a buyer, please note the following information: The following steps are carried out on all chambers we offer before sale: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful checks, the chambers are subjected to a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), Espec Type: PHP - J3 Technical Data: Air-cooled Temperature and humidity range: ambient temperature +10°C to +100°C / 40 to 98% relative humidity Temperature fluctuation: ±0.3 K Humidity fluctuation: ±2.5% Chamber volume: 398 liters Dimensions: Internal dimensions: width 600 mm x height 830 mm x depth 800 mm External dimensions: width 1010 mm x height 1690 mm x depth 1273 mm Mains voltage: 400 VAC 3-phase 50 Hz Max current: 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climate test chamber For your safety as a buyer, please note the following information! The following actions are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate Ledpotzbz Aefx Agijrw 4. After successful testing, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) If you have further questions, we would be happy to answer them by phone.

Kondisi: sangat baik (bekas), en_TIRA_Type_TCC_7120_Temperature_range_-75C__180C_Air-cooled_co ndenser_Temperature_stability_temporally_and_at_the_center_of_the _test_chamber_0.1C__0.3C_Maximum_temperature_change_rate_Heating_ 4C_per_min_Cooling_3C_per_min_Humidity_range_10__to_98__relative_ humidity_Humidity_stability_temporally_1__to_3__Dew_point_range_f or_long-term_tests_2C_to_94C_Dew_point_range_for_short-term_tests _-20C_to_2C_External_dimensions_LxWxH_1320_x_2235_x_2137_mm_Test_ chamber_dimensions_LxWxH_1000_x_1130_x_1020_mm_Test_chamber_volum e_approx._1152_liters_Max._load_per_shelf_50_kg_Max._floor_load_i n_test_chamber_100_kg_Refrigerants_R404A_and_R23_Power_supply_400 V_+6_-10__50Hz_3P_N_PE_Nominal_power_10.2_max._17.5_kW_Nominal_cu rrent_19.5_max._32.0_A_Noise_level_approx._80_dBA_Weight_1180_kg_ For_your_safety_as_buyer_please_note_the_following_The_following_ services_are_performed_in_advance_on_the_chambers_we_offer_1._Fun ction_check_and_replacement_of_necessary_components_2._If_necessa ry_recharge_with_legally_compliant_refrigerant_3._Leak_test_with_ certificate_4._After_successful_inspection_the_chambers_are_subje cted_to_a_documented_test_run_Condition_used_Scope_of_delivery_Se e_picture_Specifications_subject_to_change_and_errors_Please_feel _free_to_call_us_with_further_questions_ Lredpfx Agowfddwsiew

Kondisi: sangat baik (bekas), Espec Type: PHP - J3 Technical Data: Air-cooled Temperature and humidity range: room temperature +10°C to +100°C / 40 to 98% relative humidity Temperature fluctuation: ±0.3 K Humidity fluctuation: ±2.5% Internal volume: 398 liters Dimensions: Internal dimensions: width 600 mm x height 830 mm x depth 800 mm External dimensions: width 1010 mm x height 1690 mm x depth 1273 mm Mains voltage: 400 VAC 3-phase 50 Hz Maximum current: 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climate test chamber For your safety as a buyer, the following information applies! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone. Ljdpfx Astzbzcsgisrw

Kondisi: sangat baik (bekas), en_TIRA Type: TCZ 4022 S -2K Description: Climate Simulation Chamber, Air-Cooled System Configuration: The system consists of the following main components: - Walk-in, insulated chamber - Air handling room - Humidification unit - Machine room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40...+140°C - Temperature consistency, supply air (temporal): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature consistency, supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (to DIN 50011): approx. 2.0 K/min (without thermal test chamber load, to DIN 50011 / EN 60068, or test specimen in the range -30°C...+85°C) - Cooling rate (to DIN 50011): approx. 2.0 K/min (without thermal test chamber load, to DIN 50011 / EN 60068, or test specimen in the range -30°C...+85°C) Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% r.h. (without thermal test chamber load) - Dew point temperature range: +5...+89°C (without thermal test chamber load) - Humidity consistency (in supply air, temporal): ≤ ±2.5% r.h. (measured in supply air) Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% r.h. (without thermal test chamber load, with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test chamber load) Dimensions: - Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm - External dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening of test chamber door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design: Airflow: - Supply air: perforated plate on rear wall, ceiling area - Exhaust air: perforated plate on rear wall, floor area Temperature Control: - Direct cooling by evaporating refrigerant in a finned heat exchanger - Heating with electric resistance heaters Lodpfxevx S Hhj Agiorw Dehumidification: - Direct dehumidification by evaporating refrigerant in a heat exchanger Interior cladding: stainless steel External cladding: galvanized, plastic-coated steel sheet Floor design: stainless steel, floor load 15,000 N/m², wheel load (contact area ≥4 cm²) 1,500 N/wheel Door: double-leaf door, stainless steel, painted exterior with observation window (W x H) 1000 x 1000 mm Test chamber lighting: 4 spotlights at 500 W each Insulation: double-layer, 80 mm PUR foam, 120 mm mineral wool Refrigeration unit (1 piece): Bitzer 6G-30.2Y Refrigerant: R449A Refrigeration oil: SEZ 32 Steam humidifier (1 piece): EDB 40 Colors: - Chamber RAL 9010, white - Door RAL 9010, white - Machine unit RAL 7032, pebble grey - Control cabinet RAL 7032, pebble grey Weights: - Total system approx. 4,900 kg - Machine module KB 127 approx. 750 kg - Control cabinet approx. 120 kg - Humidification unit approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10% 3/PE N 50 Hz - Rated power: 95 kW - Rated current: 150 A

Kondisi: sangat baik (bekas), jam operasional: 100 h, ENGLISH PERFECT CONDITION, purchased in December 2016 Used for approximately 100 hours Original price: 46,808 EUR The BINDER MKF series environmental simulation chamber is ideally suited for all cold and heat tests, performed according to recognized temperature and climate testing standards compliant with DIN and IEC norms. High operator comfort and extensive standard equipment offer clear benefits for everyday use. Key features: Temperature range: -40°C to 180°C Humidity range: 10 to 98% RH Lredpovldnqjfx Agijw - Integrated 20 L water reservoir - 4 potential-free relay outputs - Preheating chamber technology e™ - Programmable anti-condensation protection for samples - Heated viewing window with LED interior lighting - Humidity control with capacitive humidity sensor and steam humidification - BINDER Multi Management Software APT-COM™ 4 Basic Edition - Diagnostic system with optical and acoustic alarm - Intuitive controller with touch screen, segment time programming, and real-time programming - Built-in data logger, measurement values readable via USB in an open format - 2 access ports with 80 mm silicone plugs, left and right sides - Independent, adjustable class 2 (DIN 12880) temperature safety device with optical alarm - 4 castors, two with brakes Additional features: - 230 V socket on the right side panel - Ramp function programmable - Integrated line recorder - Real-time clock - Door heating - Alarm notification in case of insufficient fresh water in the reservoir - 1 stainless steel wire shelf - Safety device in case of hose leakage, covering inlet and outlet hoses up to 1 m - Stainless steel interior - Halogen-free refrigerant R-404A - Cooling provided by a compressor unit

Kondisi: baik (bekas), RS simulators Type: Walk-in Climate Simulation Chamber KKC 22/45L Technical Specifications: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% rH Humidity tolerance: +/- 5.0% rH Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Year of manufacture: 2009 Technical data for solar simulation: Control module: Mitronic STB1-8 Number of lamps: 8 Ballast: Mitronic CP2k5 – 2ZS Ignition unit: Hönle Light source: OSRAM Powerstar HQI 2000W W/D/S Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in the technical data; all information is without guarantee!) Please feel free to contact us by phone for further questions. Lrodpfx Agjuvi Nfeiew