Spektrometer massa

BioMérieux VITEK MS 410895 Mass Spectrometer

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, CLEANROOM - ISO 8 | Requirements for Cleanroom ISO Class 8 | ISO 8 Cleanroom Classification | To achieve ISO 8 air cleanliness in Cleanroom environments, a multi-stage air filtration system is typically implemented (e.g. pre-filter G4, filter F9, final filter H13). Airflow within the room is non-unidirectional (there is mixing of "clean" supply air with "dirty" air already present in the room). Air exhausts in ISO 8 rooms are located on the walls. The required number of air changes per hour depends on the operations performed in the room and the number of personnel present, but a target range is 10–40 air changes per hour. In ISO 8 class, personnel may remain in the room continuously. Workers may wear standard workwear, and guests should wear disposable gowns. It is recommended to maintain a minimum positive room pressure relative to adjacent areas at 5–10 Pa. Requirements for equipment and materials intended for ISO 8 air cleanliness class Cleanrooms (maximum average number of particles released, when: number of samples taken = 100; measurement performed according to ISO 14644-14 in a cleanliness class at least one better than device usage class; particles/m³). Detailed description in photos. Technical drawings attached in photos. Ventilation Description The goal of the installed ventilation system was to achieve the following air parameters in the Cleanroom. Construction was carried out using the GBD PHARMA 2000 system, compliant with all requirements for ‘cleanrooms’ in the highest air cleanliness classes. Dsdsq H H Rujpfx Aiuoch Parameters for the installation: a. Air cleanliness - ISO 8. b. Temperature 19–23°C c. humidity max 38%. a. To ensure the required supply air cleanliness, a DOSPEL air handling unit with a maximum capacity of V = 3500 m³/h [up to 15 air changes per hour] was used. The unit is equipped with bag filters: pre-filter FK EU5/EC2 and fine filter FK-EU9/EC2. Additionally, HEPA 11 filters by EUFILTER were fitted in ceiling diffusers. Catalog sheets in section H6. As a result, with a measured capacity of 3264 m³/h, ISO 7 cleanroom class [class “C”] was achieved at rest and ISO 8 class [class “D”] during operation. b. The temperature range of 19–23°C is easily maintained by the oversized cooler and unit at 25% fresh air share. c. To achieve the required conditions during summer with outside temperatures up to 30°C and humidity around 80%, a 31.4 kW freon cooler and a 33.5 kW refrigeration unit were used. The refrigeration unit is manufactured by FUJITSU and supplied by Klimatherm Gdańsk. The room maintains automatically regulated overpressure relative to external pressure – pressure difference at doors: 15 Pa. The ventilation automation allows for an “economy” mode, in which the system works in a closed loop, maintaining 15 Pa overpressure. Technical data attached in the photos.

Kondisi: sangat baik (bekas), BacTerminator BTM10FD11001 Dedpfx Aioh Dxqvouoch Vanddesinfektionsanlæg Inkluderer pumper, styring og andet tilbehør. Fremstår i pæn stand.

Kondisi: bekas, Diese Anzeige gilt für das Bruker Microflex Massenspektrometer. Das Gerät befindet sich in voll funktionsfähigem Zustand und ist sofort einsatzbereit. Das Bruker Microflex ist ein Matrix-unterstütztes Laser-Desorptions/Ionisations-Flugzeit-Massenspektrometer (MALDI-TOF MS) und wird hauptsächlich zur schnellen Identifikation von Mikroorganismen, Biomolekülen (wie Proteinen und Peptiden) sowie Polymeren eingesetzt. Es ist Teil der MALDI Biotyper Serie von Bruker. Hauptkomponenten: - Laserquelle: Stickstoff- oder Festkörperlaser (typisch 337 nm UV) - Ionenquelle: Vakuumkammer mit MALDI Targetplatte - Flugrohr: Misst die Flugzeit der Ionen - Detektor: Wandelt die Ankunftszeiten der Ionen in ein Massenspektrum um - MALDI Targetplatte: Metallplatte für das Auftragen von mit Matrix versetzten Proben Dcedpfsxhdxqsx Aiueh Funktionsweise (vereinfacht): 1. Probenvorbereitung: Analyt mit MALDI-Matrix (z.B. α-Cyano-4-hydroxyzimtsäure) mischen. 2. Laserionisation: Laser trifft auf die Matrix und ionisiert die Probe. 3. Ionenbeschleunigung: Ionen werden in den TOF-Analysator beschleunigt. 4. Detektion: Die Flugzeit wird gemessen; kleinere Ionen erreichen den Detektor schneller. 5. Spektrum: Massen-/Ladungsverhältnis (m/z) wird gegen Intensität geplottet. Technische Daten (ca.): - Stellfläche: Tischgerät (ca. 80 cm Breite) - Gewicht: ca. 100–120 kg (modellabhängig) - Stromversorgung: Standard-Laboranschluss - Umgebung: Saubere, konstante Temperatur-/Feuchtigkeitsbedingungen erforderlich

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, de-eingangsmedium-ap-wasser-destillationsanlage Dodpfxsygmcdj Aiuech

Kondisi: baru, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Manufacturer: BRINOX Type: LEP 11 – CIP-Skid Year of manufacture: 2020 Design: Pharmaceutical / GMP Condition: New, unused, original packaging LEP 11 CS6710 Package 1 Machine type Pharmaceutical CIP System (Cleaning in Place) as a compact package unit on a stainless steel frame. Application For automated cleaning of process systems, chromatography systems, vessels, and piping systems in the pharmaceutical, biotech, and chemical industries. Suitable for NaOH, acetic acid, WFI, PW, and other cleaning media. Technical Data Heating capacity CIP medium: from +5 °C to +80 °C in max. 10 minutes Pump capacity: 1 – 4 m³/h (adjustable) Operating pressure at CIP supply: 1 – 3 bar (adjustable) Measuring ranges: Flow: 0 – 10 m³/h Temperature: 0 – +150 °C Pressure: 0 – 6 bar Design pressure: -0.9 to +6 bar Design temperature: +2 to +95 °C Construction Dodpfoyl Hwljx Aiuech • Compact package unit on stainless steel frame • CIP supply pump as centrifugal pump • Shell-and-tube heat exchanger with leak-proof design • Height-adjustable dished feet • Fully drainable execution • Maintenance-friendly design • Industrial heavy-duty construction Material & GMP design • Product-contact and cleaning media-contact parts made of stainless steel 1.4435 • Electropolished surfaces Ra ≤ 0.8 µm • FDA-compliant seals (EPDM / PTFE / silicone) • Designed for NaOH 0.3 mol/L at +80 °C • Resistant to acetic acid, WFIH, WFIC, PUW Documentation & Quality • Complete GMP documentation • CE conformity • 3.1 material certificates • Complete welding protocols • Weld seam documentation incl. photo documentation • Pressure and tightness tests documented • FAT documents available • Drainability and final rinse certificates available Condition • New • Unused • Original packaging • No operating hours • Immediately available Special features • Very high thermal cleaning power • Fully adjustable process operation • Top pharmaceutical GMP execution • High-quality European components • Investment-secure system with full documentation Location: Germany Inspection possible by appointment