Mesin penggiling permukaan

Blohm HFS 204

Kondisi: sangat baik (bekas), Tahun pembuatan: 1973, Grinding length 500 mm Grinding width 230 mm Table size 760 x 200 mm Automatic feed Bsdpfx Aaown Tdxe Towi Magnetic chuck Filtration system

Kondisi: sangat baik (bekas), Workpiece diameter – max. 600 mm Thread length: 7000 mm Module – max. 8 / 12 Module – min. 1 Swivel range: ° Cutter diameter: 63 – 140 mm Spindle speeds – stepless: 45 – 450 rpm Bwjdpfxewgizdo Aa Tei Machine weight: approx. 12.5 t Required space: approx. 9.0 x 2.0 x 2.2 m Condition: Well maintained, inspected and partially overhauled by a specialist. The existing milling head has been replaced by a reconditioned universal milling head. Equipment features: - Differential for helical machining - Automatic indexing unit (index plates interchangeable!) for multi-key and multi-start parts - Also includes numerous bushings, support rollers, and approximately 70 change gears. Converting the milling head speed to a frequency inverter with a correspondingly powerful motor is a significant advantage and saves considerable setup time. Accessories: - Approximately 70 change gears - 3 bushing mandrels in various sizes - Approximately 20 bushings - 2 roller mounts - 2 centres for direct clamping on the work spindle - 350 mm chuck - 2 spare index plates.

Kondisi: siap digunakan (bekas), Swing diameter over bed/cross slide: 570mm/420mm, turning diameter: 420mm, turning length: 635mm, travel X/Z: 220mm/635mm, spindle speed: 5,000 rpm, spindle bore: 79mm, max. bar diameter: 65mm. Tool stations: 12, driven tools: 6, tool holder: VDI 30, rapid traverse X/Z: 24m/30m/min. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2000mm, weight: approx. 4,500kg. An on-site inspection is possible. Bedev Uqcgopfx Aa Tswi

Kondisi: baik (bekas), Tahun pembuatan: 2008, Dalam kondisi teknis yang baik dan sepenuhnya berfungsi. Tahun pembuatan 2008. Sumbu Y tambahan ±60 mm Kecepatan putar spindel maksimum 3.000 rpm Daya motor spindel 22/18,5 kW Kecepatan maksimum alat penggerak 6.000 rpm - Chuck 300 mm dengan lubang tembus 90 mm, kepala spindel A2-8 - Daya dan torsi meningkat 25/30 kW, 1.000/1.300 Nm Bjdpfx Aasxdcigs Tswi - Diameter pembubutan 420-500 mm - Panjang pembubutan 1.250 mm - Sumbu C, alat penggerak - Tailstock NC, sepenuhnya dapat diprogram, motor terpisah - Daya sumbu Z ditingkatkan - Konveyor serbuk baru

Kondisi: bekas, Tahun pembuatan: 1969, Wheel diameter – max. 160,175 mm Wheel width 355 mm Module – max. 4.5 Spindle bore 75 mm Centre distance (between centres) 410 mm Number of teeth – min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece – max. 138 mm Centre distance between cutter and workpiece – min. 30 mm Milling head – swivelling 120° Cutter speeds 70 – 400 rpm Axial feeds 0.25 – 4.0 mm/rev Radial feeds 0.09 – 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Bjdjvzhf Sepfx Aa Tswi Equipment/Accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Kondisi: bekas, Tahun pembuatan: 2013, Technical details: X-axis travel: 760 mm Y-axis travel: 460 mm Z-axis travel: 460 mm Control unit: Heidenhain TNC 620 Power-on hours: 20,246 h Spindle operating hours: 7,724 h Spindle speed: 12,000 rpm Spindle torque: 75 – 95 Nm Spindle taper: SK40 Tool magazine with: 24 stations Table size: 900 x 410 mm Bwsdovhbpdepfx Aa Tsi Max. table load: 350 kg Feed range: n/a Rapid traverse: 36 m/min Interface: RS232 Control voltage: 24 V DC Compressed air connection: 6 / 8 bar Total power requirement: 20 kVA Machine weight approx.: 6.0 t Chiller dimensions: 1.7 x 0.7 x 1.35 m Machine dimensions (LxWxH) approx.: 1.9 x 2.3 x 2.45 m TNC 620 (contouring control with up to 5 controlled axes, particularly suitable for universal milling), network integration possible Safety doors with impact-resistant plastic windows Chip conveyor Hydraulic unit Coolant treatment system Rittal chiller on control cabinet Work area interior lighting Handheld control unit

Kondisi: baik (bekas), Tahun pembuatan: 1989, jam operasional: 64.136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3,150 rpm Feed range longitudinal & cross: 0.5 – 5,000 mm/min Rapid traverse longitudinal & cross: 9 m/min Main drive: 30 kW Dimensions of the machine with chip conveyor (L x W x H): 5,400 x 2,200 x 2,000 mm Weight: 6,400 kg Accessories / Special Features: • CNC control GILDEMEISTER EPL 2 with TFT display General Description: Bsdpfx Aasvr Eh Ej Tswi CNC manual input control with programming via function and numeric keypad. All data entry in dialog with the screen. Integrated menu navigation and plaintext display of all functions. Control keypad, screen, and handwheel in a separate chip guard hood. The EPL control offers the following possibilities: Programs can be entered and modified without prior programming knowledge, directly by operator guidance through the EPL control. NC programs in ISO/EIA format can be entered and output via serial RS 232 interface, or entered directly by hand. Machining Cycles: Roughing cycles for longitudinal, facing, and contour turning, also with excess allowance. Threading. Undercuts according to DIN 509 Form E and F and DIN 76, and programmable grinding allowances. Axial and radial grooves to DIN 471 and 472, also with bottom finishing. Radii at 90° and chamfers at 45°. Automatic tool nose compensation for cycles, undercut, groove, radius, and chamfer. Programming: Block-oriented, metric/inch, diameter input in absolute mode, radius in incremental mode, full circle programming, subprogram technology with skip levels for program sections. Zero point offset. Operating mode selection via menu. Program input and output: Dialog via menu with operator guidance or direct dialog input. • Hydraulic 3-jaw chuck Ø 315 mm with hollow spindle Ø 80 mm • Hinged-chip conveyor • 12-position VDI 40 tool turret, 6 standard tool positions + 6 driven tool positions • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 pcs. various standard tool holders (details to be discussed on site) Overhauled servo drive for the main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Kondisi: bekas, Tahun pembuatan: 2014, max. diameter putar 160 mm max. tinggi putar 150 mm diameter benda kerja maks. 100 mm tinggi benda kerja maks. 150 mm kecepatan putar maks. 6.000 rpm perjalanan - x 700 mm perjalanan - z 375 mm sumbu-c 360 ° Kontrol FANUC Mesin bubut vertikal | EMAG - VL2 dilengkapi dengan ban keliling benda kerja. Mesin dalam kondisi sangat terawat. Harap dicatat bahwa detail teknis diambil dari mesin sejenis. Bwedpfxsqvd Iqo Aa Tei

Kondisi: bekas, CNC cylindrical grinding machine STUDER S31 CNC LeanPro with "Pictogramming" Distance between centres: 1000 mm Centre height: 175 mm Swivelling grinding head (B axis) 360° (1° increments) 2 external grinding wheels 1 internal grinding wheel External grinding wheel: 400 mm x 40 mm x 127 mm Overhauled spindle > see photos Tailstock: Morse taper 4 (CM 4) Speed range: 0–1000 RPM CNC control: Fanuc Bsdpfx Aowim U Hea Towi Programming: Pictogramming Heidenhain linear encoders The machine is under power in our warehouse in Gussago (BS), Italy.

Kondisi: bekas, Tahun pembuatan: 1985, Grinding length: 600 mm Bwsdewd Tx Uopfx Aa Toi Grinding width: 200 mm Total power requirement: 7.5 kW Machine weight approx. 2.3 t OFFER We can offer you, subject to prior sale and errors, ex stock, without obligation: JUNG Horizontal Precision Surface & Profile Grinding Machine with Microprocessor Control Type JF 520 MS Year of manufacture 1985 2225 _____ Maximum grinding length (table longitudinal travel 600 mm): 600 mm Maximum grinding width (cross travel max. 230 mm): 200 mm Maximum grinding height under wheel approx.: 230 mm Max. distance table – spindle center: 500 mm Magnetic chuck size: 500 x 200 mm Maximum table load: 100 kg Table speed: 1 – 24 m/min Table speed, creep-feed grinding: 5 – 450 mm/min Max. table cross feed: 1,000 mm/min Max. grinding head vertical traverse speed: 500 mm/min Grinding wheel dimensions: 250 x 25 x 50.8 mm Maximum circumferential speed (ceramic): 35 m/s Infinitely variable grinding spindle speed: 800 – 4,200 rpm Grinding spindle drive approx.: 5 kW Total drive approx.: 7.5 kW - 400 V - 50 Hz Weight approx.: 2,300 kg Accessories / Special features • Microprocessor program control (SIEMENS) with simple on-screen display. Program sequences are set via decade switches and stops (with vernier scale) and monitored on the screen. • Programs: Plunge grinding with/without cross positioning, surface grinding with stepwise or continuous cross movement, creep-feed grinding in up-cut or down-cut mode with/without cross positioning. All programs with automatic rough/grind/finish cycles and automatic return. • Automatic straight dressing device AF 65 S with automatic compensation of the dressing value and automatic speed adjustment for constant cutting speed (with display) • DIAFORM – grinding wheel profiling device mounted over the grinding wheel • Electrically controlled creep-feed device with feed rate and motor load display. • Short-stroke device for table reversal and table clamping "crossways" • Swiveling JUNG sine magnetic chuck 450 x 180 mm, mounted. Separate swiveling sine magnetic chuck 350 x 175 mm, fine-pole, with stop. • Coolant system with paper band filter, additional accessories, operating instructions Condition: Very good condition, with accuracy protocol from JUNG technician! Please click here for a video of the machine: Delivery : ex stock, available immediately, FCA Metzingen Payment : strictly net - upon receipt of invoice