Meja putar las, ketinggian 3 sumbu dapat disesuaikan

Dumeta D-TLP-HE-05

Kondisi: baru, Table diameter: 700 mm Table load capacity: 0.5 t Swivel range: 0 - 135 degrees Rotational speed: 0.2 - 3 rpm Height adjustment: 400 - 900 mm Bore diameter: 100 mm Csdpfx Absfv Azlehsgn Max. welding current: 500 Amps Total power requirement: 0.75 kW HYDRAULICALLY HEIGHT-ADJUSTABLE ROTARY-TILT TABLE WITH THROUGH-BORE • Self-locking gearbox, no run-on or overrun with eccentric load. • Electronic components by Siemens and Schneider. • Frequency-controlled, stepless speed adjustment of the rotary drive. • Turntable with large through-bore and T-slots. • High stability due to intelligent design. • CE certificate. • Very good price/performance ratio. • The D-TLP series comes with welding current transmission, remote control, and foot pedal (left/right).

Kondisi: sangat baik (bekas), panjang pembubutan: 5.500 mm, Manufacturer: WEIPERT Model: W1400 Control: R&D MTC3 Turning length: 5,500 mm Swing diameter over bed: 1,400 mm Swing diameter over cross slide: 960 mm Length: 9,000 mm Width: 2,900 mm Cgedpfowzhzlex Abhsn Height: 2,900 mm Weight: 32,000 kg

Kondisi: baru, Tahun pembuatan: 2024, 600 kg load capacity Cjdpfx Aeg Tdpgobhegn Height-adjustable welding positioner with 100 mm through-hole Table diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Tilted height: min. 0.45 m, max. 0.95 m Rotation speed: 0.01 – 1.3 rpm Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Kondisi: baru, Sheet bending: 6.0 Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » with 3x upper roll diameter Initial pre-bending: 6.0 mm » with 1.5x upper roll diameter Upper roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of upper and lower rolls via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Conical bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Operating instructions in GERMAN and ENGLISH • Machine and equipment according to CE regulations Catalogue: see the following link: Cgodpfx Ajd Ab H Hobhon Important notes for conical bending: • The max. sheet thickness is 50% of the nominal capability • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Kondisi: baru, Welding Positioner Table 50 kg Model: KT-50 without chuck Maximum load (horizontal): 50 kg Maximum load (vertical): 25 kg Rotational speed: 1–7.5 rpm Rotation direction: left and right Turntable speed: manually adjustable Turntable diameter: 315 mm Turntable height: 375 mm Turntable tilt angle: 0–90° Motor power (operating): 0.08 kW Motor power (standby): N/A Dimensions: 430 x 430 x 375 mm Weight: approx. 38 kg Power supply: AC 110V / 220V 50/60 Hz Cedpfx Abebambrjhegn Price does not include quick-action chuck and height-adjustable workbench. Surcharge for quick-action chuck: €195 Packaging and shipping within Germany: approx. €80

Tahun pembuatan: 2023, Kondisi: seperti baru (mesin pameran), Technical specifications: - Load capacity: 15,000 kg - Net weight: 960 kg - Workpiece diameter (insertable): approx. 50 – 3,200 mm - Roller diameter: 250 mm Cjdpfod Iuqaex Abhogn - Roller width: 240 mm - Rotation speed: approx. 100–2,000 mm/min - Dual-pedal foot switch - Potentiometer for stepless speed control

Kondisi: baru, en-GB: GRATMAXX Deburring Brush Machine The machine is suitable for deburring cut edges on: Round tubes, square tubes, rectangular tubes, solid bars, and all types of profiles. Materials: Hard or mild steel, non-ferrous metals, plastics. Process: After setting up the workpiece support and the lateral stops, the burred workpiece is simply held against the brush, which rotates around its own axis. The workpiece itself is not rotated – this motion is performed by the brush. The material of the workpiece, burr thickness, and desired edge rounding determine the contact pressure and duration, typically around 1-5 seconds. Technical specifications: Material: Steel, stainless steel, and non-ferrous metals (motor speeds 700–1,900 rpm, steplessly adjustable) Min. workpiece diameter: 5 mm Max. workpiece diameter: 100 mm (150 mm) Brush dimensions: 2 pieces Ø 300 (250) x 50 mm or 3 pieces Ø 300 (250) x 35 mm Drive power: 3.0 kW Power consumption: 3.5 kW Operating voltage: 3~, 400 Volt, 50 Hz Rated current: 8A Fuse: max. 16A Control voltage: 24V DC Width: approx. 500 mm + handwheel 74 mm + extraction nozzle 130 mm Height: approx. 1,382 mm Working height: approx. 1,080 mm Cedpfed Hmnfsx Abhjgn Depth: 1,209 mm Weight: approx. 310 kg Sound pressure level: at 700 rpm 64 dB(A), at 1,500 rpm 74 dB(A), when processing a workpiece at max speed 82 dB(A) Scope of delivery: - Rotational head deburring brush machine GratMaxx with power socket (without cable) - Workpiece support table with adjustable angle stop and workpiece stops - Tool for brush replacement - Brushes not included in the scope of delivery! Accessories: F50201 Wire brush, twisted wire 0.38 mm F50202 Wire brush, steel wire 0.2 mm F50203 Wire brush, steel wire 0.38 mm F50204 Wire brush, stainless twisted wire 0.38 mm F50205 Abrasive nylon brush U180 F50206 Abrasive nylon brush U120 F50207 Wire brush, stainless wire 0.20 mm For further technical data, please refer to the attached PDF document.

Kondisi: bekas, Tahun pembuatan: 2025, tinggi total: 2.200 mm, lebar total: 800 mm, panjang total: 1.450 mm, de-hu-001 Cgedpfjw N Su Dex Abhsn

Tahun pembuatan: 2021, Kondisi: sangat baik (bekas), Complete set incl. hand and dual foot remote control Digital speed display Hydraulic height adjustment Dimensions: Minimum tilted height: 800 mm Maximum tilted height: 1900 mm Minimum horizontal height: 1050 mm Maximum horizontal height: 2000 mm Diameter of face plate: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Speed range: 0.01 to approx. 0.7 rpm. Cgedpfxem Ew Sto Abhon

Kondisi: baru, en-001 Cgedpfxefbbx Rj Abhsn