Gergaji potong pengoptimal BMH Z18/6500/GI 2001

BMH Z18/6500/GI

Kondisi: bekas, Tahun pembuatan: 1994, Zweiwellen-Mehrblattkreissäge Pedstqld Ujpfx Ab Isgw - Hersteller: A.Costa - Modell: Jaguar - Maximale Schnitthöhe: 200 mm

Kondisi: baru, Tahun pembuatan: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Swivel adjustment with crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction connection: 100 mm Roller conveyor length: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight: Psdpfeizkhvex Ab Iogw

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2018, Bialbero Multiblade Saw mod. SQUALO 420 2x75kW - Refurbished as New with Warranty - € 65,000.00 Year: 2018 Technical data: Pgodpfx Abshrdxio Iow - Infeed roller width: 420 mm - Outfeed roller width: 520 mm - Max saw group width: 400 mm - Max cutting height: 200 mm - Min working length: 800 mm - Max passage width: 700 mm - Saw spindle diameter: 60 mm - Max circular saw blade diameter: 370 mm - Saw blade bore diameter: 80 mm - Saw spindle speed: 3,800 rpm - Feed speed via rollers: 4–36 m/min - Weight: 5,500 – 6,000 kg - Overall dimensions: 2500x2260x2000h mm

Kondisi: bekas, Tahun pembuatan: 2014, Number of spindles: 5 pcs Working width: 230 mm Planing height: 120 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min Control: Memory function Weinig Powermat 600 Compact ----- Machine will be cleaned and fully inspected. Summary: ----- - 5 spindles - Powerful motors - Left and top spindle controlled for width and height Detailed description: ----- Technical data: Working width: 20-230 mm Working height: 10-120 mm Number of spindles: 5 1st spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle: 125 - 145 mm Tool cutting circle rebate cutter: 130 - 160 mm Axial adjustment range: 5 mm Rebate unit Marathon coating for infeed table in front of 1st lower tool holder Electronic digital display for radial adjustment 2nd spindle - right ----- Motor with brake: 11.0 kW Shared motor with left tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle 40 mm below table level: 93 - 200 mm Tool cutting circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight knife heads max.: 163 mm Max. tool diameter behind reference plane: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm 3rd spindle - left ----- Motor with brake: Shared motor with 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle 40 mm below table level: 93 - 200 mm Tool cutting circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight knife heads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Spindle radial CNC-controlled 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle: 93 - 200 mm Tool cutting circle for straight knife heads max.: 180 mm Max. profiling depth: 35 mm Pgjdpfx Aswzmu Reb Isw Axial adjustment range: 40 mm Spindle radial CNC-controlled Segmented pressure shoe in front of top tool holder, adjustable to cutting circle and can be swung away from the tool, spring-loaded. Pressure shoe in front of and discharge after the top spindle with electronic digital displays, integrated into the memory function or PowerCom. 5th spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle: 93 - 200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of 1st lower tool pneumatically controlled high/low. Durofer pointed-tooth rollers with depth limiter, self-cleaning. Feed rollers adjustment versus left tool holder, axial 35 mm Machine electrics ----- Operating voltage 400 V (voltage range 380 - 420 Volt), 50 Hz. All spindles IE 2 version Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN60204, IEC-204-1. Other electrical regulations are not considered.

Kondisi: baru, Perlengkapan: pencahayaan, Take your painting process to the next level – with mobile convenience. Mobile paint booths in container design for painting and coating a wide variety of objects. They are specifically engineered for mobility, allowing for easy transport and rapid deployment on different worksites. The cabin is typically equipped with a ventilation system to ensure air quality, integrated lighting, and a filtration system that prevents paint mist from escaping. The ventilation system ensures that vapors and particles released during painting are contained within the booth, eliminating any risk to the surrounding environment. Mobile paint booths provide a practical and flexible solution for companies that need a relocatable, effective painting system, easily transported from one construction site to the next. Overview of design and features Our mobile 20-foot Sapi painting containers feature a robust steel framework with welded wall and ceiling panels. Inside, we can install specialized equipment such as cranes or lifting devices. The floor is made from checkered steel plate. Both door panels include ventilation grilles fitted with fine-pore filter mats. One panel is designed as an escape door for safety reasons and features a viewing window. It is important to note that these are not simply converted shipping containers—we manufacture all our containers from the ground up, using only the most durable materials that meet all requirements and have been tested and proven for safety. Standard shipping containers would not meet the required safety standards. Paint mist extraction system in the mobile painting container The paint mist extraction wall for overspray separation is installed in front of the rear wall and equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, edged with guide plates, including various hanging and fastening elements for filter installation. On the exterior rear side of the container, a high-performance, ATEX-certified extraction fan with drive motor is installed on a mounting console. Next-generation mobile paint booths: meeting EU requirements and advancing coating solutions Pgedpfx Absun Shge Iow The new generation of mobile paint booths must meet the highest EU standards. Accommodating modern coatings such as water-based paints, polyurethane resins, epoxy zinc dust, or epoxy iron mica coatings imposes stringent requirements on existing painting booths. This is why we have developed a new and unique mobile paint booth to support the next generation of coating solutions. A key criterion is the transport of workpieces for painting and further processing steps. Need more information? Our engineers can provide expert advice and support. Whether you require dry paint mist separation or wet scrubbing, humidification or air drying, condensation drying using low-temperature techniques or hot air drying, or pre-treatment of workpieces by high-pressure washing with water recirculation, compressed air blasting, or turbine wheel blasting technology, we offer the optimal solution.

Kondisi: bekas, Tahun pembuatan: 2012, lebar total: 1.750 mm, panjang total: 1.800 mm, tinggi total: 1.600 mm, de-hu-01 Psdpfewniidox Ab Iegw

Kondisi: baru, Step-by-Step Painting Systems Elboy Industrial Solutions designs and manufactures a broad range of paint shops tailored to your products. With ELBOY, you can use virtual reality during the design phase to navigate through your facility, allowing you to implement desired modifications at this early stage and avoid unexpected outcomes later on. We provide engineering and manufacturing services for your application, with particular emphasis on environmental protection and occupational safety across processes such as sandblasting, filling, washing, priming, and top-coating for all product sizes. Step by Step systems are available with overhead conveyors or floor conveyors and can be configured to accommodate products of any size. Booths for sandblasting, chemical washing, pre-coating, drying, filling, top-coating, and curing can all be integrated into the system. Pjdpfx Abedy Dw As Iegw To carry out the processes specified by the system in sequential steps, automatic doors open upon completion of each process, and the product automatically advances to the next processing station. These fully automated systems are operated via a 15-inch touchscreen and offer various reporting options, such as main computer monitoring, product reporting, outcome reporting as required, and remote control. These are paint shops that are engineered and manufactured by our specialists according to your capacity, operational requirements, and other specifications. For requirements such as electrostatic powder coating, wet coating, sandblasting, painting, coating, washing, and similar systems, maximum efficiency is achieved with minimal staffing and optimal use of space.

Kondisi: bekas, WEINIG Profimat 26 Super Planer/Moulder Working width: 20 - 230 mm (260 mm) Working height: 8 - 120 mm (140 mm) Podpjwqda Njfx Ab Isgw 5 working spindles, spindle diameter 40 mm Long infeed table (approx. 2000 mm) Bottom spindle: 4 kW / Left and right spindles: 7.5 kW each / Top spindle: 5.5 kW / Bottom finishing spindle: 5.5 kW Pneumatic pressure for feed rollers Cardan shaft feed, infinitely variable: 5 - 24 m/min Infeed roller before jointer Push-button control panel Automatic lubricant pump Mechanical digital readouts Machine in CE-compliant design Year of manufacture: 2001 Sold without processing tools Machine is WORKSHOP OVERHAULED and in GOOD CONDITION The machine is connected and ready for demonstration in the exhibition center Available from stock Lieboch

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 230 mm, diameter spindel: 40 mm, tinggi kerja: 120 mm, jumlah spindel: 6, Four-Side Planer and Moulder Manufacturer: Weinig Model: Hydromat 23C Year of manufacture: 2005 Working width: 230 mm Pgodpfx Absv T R A Dj Iow Working height: 120 mm 6 spindles Spindle arrangement: bottom/right/left/top/top/bottom Spindle motors: 7.5 kW each Automatic table lubrication Automatic Memory System control Spindle diameter: 40 mm Spindles with double-sided bearings The last two heads are equipped with jointers

Kondisi: baru, Tahun pembuatan: 2025, The SQUALO 515 single-shaft multi-blade or multi-rip circular saw, in the LM version, is distinguished by its advanced mobile blade system. The machine is equipped with motorized feed rollers on the worktable and top motorized pressure rollers, ensuring effective all-wheel drive for precise and consistent material transport. In the LM (Mobile Blades) configuration, the cutting unit consists of one fixed blade and a variable number of one to three mobile blades. These mobile blades can be dynamically positioned to accommodate various trimming and multiple cutting requirements. A distinctive feature of this model is the possibility to expand its cutting capacity: by using special spacers, the number of blades used simultaneously can be increased up to six. It is important to note that the blades mounted on these special spacers operate at a predetermined fixed distance, allowing for the efficient production of components with standardized widths. This versatility enables the machine to seamlessly switch from operations requiring flexible blade positioning to serial production with fixed cutting intervals. Podpfohpbxiex Ab Ijgw