Pabrik sortir OI

Bollegraaf & Lubo

Kondisi: bekas, Tahun pembuatan: 2003, Technical details: Pressing force: 40 t Itjdpsu Nw Ezofx Aa Nsb Hopper opening: 1200 x 730 mm Material: Cardboard, plastic – e.g., PET bottles Voltage: 400 V / 50 Hz Total power requirement: 16.4 kW Transport dimensions (machine): 6.5 x 6.2 x 2.7 m Fully automatic hydraulic CHANNEL BALER for recycling applications – Incl. feed unit/conveyor belt, LxW: 4500 x 1000 mm, motor-driven – Equipped with automatic 3-fold tying unit – Bale counter/display Press chamber (LxWxH): 1800 x 800 x 800 mm with 1.2 m³ volume Bale size (LxWxH): 300–1500 x 800 x 800 mm Bale weight: 250–450 kg, depending on material and bale length Filling opening (LxW): 1200 x 730 mm; Filling height: 1200 mm Hopper size (LxWxH): 1200 x 1200 x 1400 mm; Fill height: 2500 mm

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed Iedovwlqqjpfx Aa Netb - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 21.676 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 750 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 25.000 kg, tinggi transportasi: 3.000 mm, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), berat kosong: 25.000 kg, laju aliran volumetrik: 930 m³/jam, tekanan kerja: 250 batang, Hello, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Pressing force (main press): 78 t Specific pressing force: 95 N/cm² Pre-press lid force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 l Press dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. Itodpfx Aasvgrh Uo Nob We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Tahun pembuatan: 2015, Kondisi: diremaj di bengkel (bekas), Technical data for feed hopper with hydraulic moving floor and sack opener: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Hopper volume: 30 m³ Drive power: 17.5 kW Dimensions (current state): 13,200 x 3,050 x 4,350 mm (L x W x H) Condition of the machine: The feed hopper with sack opener was in operation at a large recycling facility, where bagged waste was loaded into the hopper with wheel loaders. The bags were opened by the sack opener, and the waste was metered for further processing. The unit operated flawlessly until it was dismantled and replaced by a larger, higher-throughput system. Itedpfeu R Rtbex Aa Nsb Remarks: The machine is currently undergoing refurbishment in our workshop. The photos show the machine at its current stage of refurbishment, so it is not yet fully assembled. After completion of the refurbishment work, expected in February 2025, the machine will be tested under operating conditions without material. Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is complete. Viewing by appointment is possible. We accept no liability for the technical specifications or possible errors.

Tahun pembuatan: 2003, jam operasional: 43.000 h, Kondisi: perlu perbaikan (bekas), nomor mesin/kendaraan: HBC 140 2x75kW 2003 (W230-005), nl-naar-en Itodokcgynjpfx Aa Nsb

Tahun pembuatan: 2022, Kondisi: baru,

Kondisi: baru, Tahun pembuatan: 2025, Daya motor 7,5 kW - Gaya potong 30 ton Saluran pemotongan dirancang untuk - panjang gulungan maks. 1500 mm - diameter gulungan maks. 1250 mm - Berat mesin sekitar 3800 kg - Kapasitas tangki sekitar 110 liter - Kisi pelindung tangan di area panel kontrol dan seberangnya Ijdpfx Aoltmi Sea Netb - Pengunci pisau - Meja belah model lurus - Dokumentasi 2 rangkap dalam Bahasa Jerman (1x dalam bentuk teks, 1x di USB) - Warna RAL 5012 - biru terang Kisi pelindung/palang pisau RAL 1028 kuning melon Mesin tersedia di gudang - siap kirim Harga dan info lebih lanjut atas permintaan

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jam operasional: 2.632 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 29.381, gaya penekanan: 35 t, lebar bukaan pengisian: 620 mm, panjang bukaan pengisian: 1.000 mm, lebar total: 2.380 mm, tinggi total: 2.500 mm, panjang total: 6.625 mm, Termasuk sabuk pengumpan. Mesin siap digunakan segera. Ijdpfovaw T Aex Aa Nstb

Kondisi: bekas, Total tinggi 6500 mm, luas dasar 2000 x 2000 mm, instalasi luar ruangan. Seri filter kompak model PKFP – 1 elemen – 1,92 x 1,92. Filter jenis rattle, pengoperasian tekanan lebih. Panjang selang filter 2500 mm, diameter 180 mm – sehingga total luas penyaring 105 m2. 2 kipas udara mentah – 2 pipa (diameter 300 mm): 1 x kipas KT 300, daya 15 kW, kapasitas 6361 m³/jam, tahun 1999; 1 x kipas S 25/300, daya 7,5 kW, kapasitas 7400 m³/jam, tahun 1993; 1 x kipas transportasi, 6,1 kW, kapasitas 57 m³/menit, tahun 1996. Total volume aliran sekitar 14.000 m³/jam. Mesin press briket Höcker Polytechnik tipe BrikStar C 3 - 12 . 1225, motor 3,0 kW, diameter briket 65 mm bulat, kapasitas kira-kira 40–45 kg/jam tergantung berat jenis material. Lokasi penyimpanan: Nattheim. Itjdpjvviytefx Aa Nsb

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: HBC 140 2x75kW 2001 (210-008-01), gaya penekanan: 155 t, berat bal: 1.500 kg, tekanan: 250 batang, daya: 150 kW (203,94 hp), tahun perombakan terakhir: 2024, Perlengkapan: dokumentasi / manual, Verkocht door Bollegraaf Recycling Solutions, de oorspronkelijke fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Balenpers (2x75kW). Pers: Gewicht: 47.100 kg Bouwjaar: 2001 Variabele kanaaldrukregeling Kunststof ventiel Anti-rattenbekabeling 0 uur na volledige revisie Deze pers wordt volledig gereviseerd verkocht volgens de 'Bollegraaf OEM Gecertificeerde Revisiestandaarden'. Dit bevat 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Reiniging & demontage Voordat de daadwerkelijke revisie plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na de demontage worden de toleranties van alle stalen componenten gemeten en waar nodig opnieuw gelast. Dit geldt in ieder geval voor de volgende onderdelen: • Persplunjer • Frame • Kanaal • Voordruk-klep Na demontage en inspectie wordt de persplunjer opnieuw opgelast en voorzien van nieuwe plunjerwielen. De beschermroosters en de voordruk-klep worden uitgedeukt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en eventueel las- en herstelwerk worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydraulische leidingen en slangen worden vervangen. De hydraulische componenten worden gereviseerd. De hydraulische olie wordt ververst. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitdozen worden vervangen en teruggeplaatst op eenvoudig toegankelijke posities. Slijtagedelen: Alle slijtagedelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtagedelen van (beide) naaldinstallaties en knopers worden vervangen. Cilinders: De cilinders worden gereviseerd en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC Kast Itodpstvau Aefx Aa Neb De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vernieuwd. De PLC en HMI (‘human interface’) worden vervangen door de nieuwste Schneider M340-versie inclusief de nieuwste software.