PUSAT MESIN CNC 3-sumbu (X-Y-Z)

BREMA (BIESSE Group) Vektor PI 25-13 (1R10 - 2MI+1MI)

Kondisi: baru, Tahun pembuatan: 2024, Crosscut saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Working table inclined by 8° Technical features of the cutting unit: Pneumatic upstroke saw TR500 Motor power 10 HP (7.5 kW), 400V/50Hz TCT blade diameter 500 mm, bore 30 mm, Z=144, S=4.6 Cutting cycle speed: 4 seconds Gtsdohw Ng Iepfx Adtst Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE FOR LEFT AND RIGHT SIDE Feed via rack-and-pinion system and brushless motor Positioning accuracy +/- 0.4 mm Powerful feed motor for bundle weight of up to 80 kg Maximum feed system speed 90 m/min Pneumatic pusher lift-up at end of cutting cycle and overhead return Data input management: 12” TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Loading and saving of machine parameters via USB port Editing and direct input of cutting cycles (patterns) at controller Transferring cutting lists created on PC via USB or Ethernet port Operating software: Manual entry of load board length Partial optimization without board length reading Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1,000 cutting lists with 11 dimensions or one list with 10,000 consecutive dimensions "OPTI" package: automatic board length detection and full optimization. Piece length reading via photocell Cutting cycle with 6 optimization criteria (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: total optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: “OPTI PLUS” package: for removal of knots and defects Photocell for reading knots and defects during wood mapping Marking with fluorescent chalks/crayons (Note: can only be ordered in combination with ZA250) Pneumatic side clamping device

Tahun pembuatan: 2003, Kondisi: baik (bekas), Travel: 560 x 410 x 510 mm, table: 900 x 410 mm, 30-tool magazine, spindle: 12,000 rpm, chip conveyor. Gjdpfxsiwkhke Adtett

Kondisi: diremajakan ulang (bekas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, with high-speed automatic handling equipment. Comprising the following machines: A) FEEDING STATION "RBO" Winner C 3200 with double pick-up and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for in-feeding panel stacks to the loader. B) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° C) 1st AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT Gsdpfodfgg Isx Adtett with 2 horizontal drilling units + 7 lower vertical drilling units D) 2nd AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units E) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° G) STACKING STATION "RBO" Winner SC 3200 with double pick-up, double stacking station, and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for out-feeding panel stacks from the unloader.

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), Connected load: 4 kW, weight: 1 t. Gjdpfx Adshlp Efotstt

Kondisi: baik (bekas), Tahun pembuatan: 1994, 2-sided planer, top and bottom Constant table height (always consistent feed height) Max. planing width: 600 mm Max. planing height: 280 mm Godpfx Adshuthyetjtt Cutterheads with strip knives Immediately ready for operation

Tahun pembuatan: 1988, Kondisi: perlu perbaikan (bekas), Mekanisasi untuk di depan mesin serut untuk KVH/BSH – untuk panjang hingga sekitar 13 m. Instalasi KVH+BSH ideal untuk di depan mesin serut. Pemisahan memanjang – pemisahan satu per satu. Gergaji potong melintang: 4 buah gergaji bundar yang dapat disetel samping. Penampang potong: 180 x 220 mm, 150 x 300 mm. Satu operator sudah cukup. Gtsdpovbtpsfx Adtot

Kondisi: baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0540/98, Fertigungsnummer: 0540/98. Baujahr: 1998. Presskraft: 400 Tonnen. Hubweg: 300 mm. Hubzahl: 10–40 / min. Stößelverstellung: 300 mm. Einbauhöhe: 700 mm. Tischabmessungen: 1600 x 1300 mm. Eigengewicht: 45 Tonnen. Ständerdurchgang: 1600 mm. Gjdpjicbbzjfx Adtjtt Außenmaße: 2 x 3 x 6 Meter. Steuerung: MEAB. Walzenricht- und Zufuhrgerät: iRON RNE 50B / 11. Abwickelhaspel: iRON SA6000, max. Bandbreite 700 mm.

Tahun pembuatan: 2011, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Finger jointing line for cross-sections up to 200 cm² (80/240 mm or 100/200 mm), including the following components: 1. HOWIAL Tilt Destacking System - SH/4t - 1.75x1.75x6.00m - 4t – shortest length 2.50 m, semi-automatic package separation. For tilting the timber stack up to 45°. Electro-motor drive. Max. stack dimensions 1.75 x 1.75 x 6.00 m. Max. stack weight 4 t. Shortest timber length 2.5 m. 2. HOWIAL Lamella Separator VE 1 to crosscut saw. With pneumatically controlled tongues, on which material marked for defects is placed onto the underlying roller conveyor. 3. HOWIAL Grading Roller Conveyor RO-1 Digital wood moisture measuring, control and recording system for automatic acquisition and control of wood moisture using the impulse measuring method based on the electrical resistance principle. 4. Gann DMT-8 Digital wood moisture measuring, control, and recording system for automatic acquisition and control of wood moisture by impulse measuring based on the electric resistance principle. System installed in a large control cabinet, complete with inkjet printer. 5. HOWIAL Crosscut Saw AS-30 B Pneumatically controlled under-table crosscut saw with 2 automatic feed units, automatic crosscutting. Special photo cell control for detection of fluorescent line marking. Automatic waste detection possible. Saw motor power 7.5 kW Saw blade diameter 700 mm Feed drive approx. 2 x 1.5 kW Gtjdpfsi Ezx Dsx Adtst Air pressure 8 bar Max. feed speed approx. 60 m/min 6. HOWIAL Belt Conveyor for cutoff waste, with profiled belt and guide plates Belt width 350 mm Belt length 2000 mm Belt speed 0.4 m/s 7. HOWIAL Double Roller Conveyor RO-2, 6.00 m long Incl. transverse transport, conveyance to finger jointing system. Powered by round belt, all rollers driven. Cross-transfer chain conveyor. Eject ± moisture right, transport speed adjustable up to 100 m/min. Length approx. 6.00 m Roller width approx. 400 mm Diameter 112 mm 8. Compact Finger Jointing Machine Cook Bolinder The technical data are original from Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Input lengths from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Pressing force 5 - 22 tons Spindle diameter 50 mm Finger joint profile 15/15 Spindle speed approx. 6000 rpm Total electrical connected load approx. 62 kW Machine weight approx. 9 tons Gluing: OEST comb system for PU Modern Telemechanique PLC control. 9. HOWIAL Roller Conveyor with Destacking Powered roller conveyor with automatic ejector and hydraulically driven destacking arms. Technical Data: Height: 920 mm Length: approx. 12,000 mm 10. Safety fence panels including safety switches 11. Finger Joint Testing Machine BSPLT-100 Testing machine for finger joint bend test according to DIN 1052-1/A1 and EN 385. Bearing distances freely adjustable, mounted measurement scale, automatic calculation of support distances in the software. Fully automatic test sequence by mouse click via PC (PC not included). Alternatively, the test process can be operated via front panel keys. Connection to any standard PC or laptop (Win 2000/XP) via supplied RS232 serial cable. Fully automatic data acquisition and protocol generation in MS Excel with graphical representation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. pressing force: < 100 kN Max. support length: 2100 mm Measuring accuracy WITHOUT DISMANTLING

Kondisi: sangat baik (bekas), twosided single machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm 0.3 / 3 Edge thickness with strip veneer (min/max) mm 3 / 10 Panel thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Geded Nt Rqspfx Adtjtt Control/Software: ICOS Open Feed speed (m/min): 10 - 50, no power transmission bar (Master & Slave systems) Retractable reference stops, spacing (mm): 1080 PROCESSING UNIT (for each side): Protective milling unit (pre-milling) 75.186 (1 x kW 4.4) Chipper unit (2 x kW 8) Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (for each side): Gluing unit (hot-melt glue) 283.1513 04.1570 + 283.205 Edge pressure zone - edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 1) 0° - 30° Multi-function unit (radius milling and profile milling) 08.342 (2 x kW 0.66) servomotors Profile scraper unit 08.519 Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-4 (4 x kW 0.18) Universal milling unit for grooving/rebating and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, de Gjdpfx Aevupk Aedtott