Mesin Sizing-Edge Banding sisi ganda

IMA Combima II/390/B/R3

Kondisi: baik (bekas), Tahun pembuatan: 2012, Mesin pemotong plasma CNC tipe portal Pabrikan: Microstep Tipe: SPL PAA 9001.25 Tahun produksi: 2012 Djdpfxju U Hm As Aaqskl Kontrol CNC Area kerja: 2.500 x 9.000 mm 1 obor plasma dengan sumber daya Kjellberg HiFocus 280i 2 obor autogen propana Meja getar Beuting Sistem filter Donaldson DFPRO12 untuk instalasi luar ruangan

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 25.05.004, panjang total: 9.500 mm, lebar total: 2.250 mm, tinggi total: 2.300 mm, tegangan masuk: 380 V, daya: 50 kW (67,98 hp), berat keseluruhan: 21.000 kg, berat kosong: 18.000 kg, sambungan udara terkompresi: 7 batang, Perlengkapan: dokumentasi / manual, EN-Paper size: 730 x 1060 mm; maximum printing area: 710 x 1040 mm. Paper thickness: 0.05 mm – 0.5 mm. The current maximum speed (set to simulate the time for sheet removal on high-speed presses) is 4,000 sheets per hour, but the machine can run significantly faster for commercial work. Four-fold central impression cylinder, which processes all four printing units in one gripper cycle. 1988 FAG Speedproof with a control console for ink fountains and cylinder adjustment for extremely precise register printing. Attached is the original factory brochure. The machine has been completely dry-ice cleaned and the cylinders are in excellent condition. The machine is offered strictly as-is. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. The price is absolutely non-negotiable and is based on removal of parts that could otherwise be sold separately, such as the Mabeg feeder with vacuum belt, and the four-unit Baldwin stainless steel recirculator, each color with its own tank, mixer, and individual temperature control—so all four tanks can be set to different temperatures and alcohol contents. The machine has been dry-ice cleaned, and the original intention was for it to be used in electronic paper printing, but the project was abandoned due to excessive startup losses. We have had the machine for three years and, due to its size, I want to sell it as quickly as possible. That is why it is offered at this very low price. It is an excellent machine. If the machine needs to be set up for testing and trial runs, this can be arranged at an extra cost of €10,000, of which €5,000 must be paid in advance as a deposit under certain conditions. All relevant information can be found in the original FAG brochure, available in PDF format through this advertisement. Technical Data • Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) Dkjdjuf Sy Ajpfx Aaqsl • Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) • Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) • Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) • Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) • Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) • Speed max.: 4,000 sheets/h • Floor space required (including access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) • Press height: 230 cm (90.55 in.) • Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lb) • Total power requirement: approx. 50 kW • Compressed air supply: 6 – 7 bar

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, translation_001 Dkodpfx Ajiyx Ixjaqsl

Kondisi: bekas, nomor mesin/kendaraan: 006370, Type of attached edge: thin edge, thick edge Adhesive system: EVA Jointing milling: yes Multifunction unit: yes Top milling unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 12 pcs Dkedpfxjl Txw Ho Aaqol

Kondisi: diremajakan ulang (bekas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, with high-speed automatic handling equipment. Comprising the following machines: A) FEEDING STATION "RBO" Winner C 3200 with double pick-up and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for in-feeding panel stacks to the loader. B) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° C) 1st AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units D) 2nd AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT Dksdpodfgg Ijfx Aaqel with 2 horizontal drilling units + 7 lower vertical drilling units E) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° G) STACKING STATION "RBO" Winner SC 3200 with double pick-up, double stacking station, and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for out-feeding panel stacks from the unloader.

Kondisi: sangat baik (bekas), DOUBLE-SIDED FEEDING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (with carriage gliding on it) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for feeding stacks of panels to the feeding station External motorized roller conveyor (receiving panels from the feeding station) Dsdpfxsfi Tg Ho Aaqjkl Separate electrical control panel Perimeter safety fencing with safety mats Operating capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Minimum panel dimensions mm 250 x 320 (approx.) Maximum panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 Dedpfx Aaegwbbqoqokl No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Kondisi: baru, Tahun pembuatan: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Sound level: 70 dB Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Dksdpsi Hplksfx Aaqol Machine width: 1650 mm Machine height: 1100 mm Weight: 850 kg

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Dübeleintreibmaschine mit Bedienpistole für gleichzeitiges Leimauftrag und Dübeleinsetzen Standarddübel Ø8 mm Djdoqu N U Djpfx Aaqjkl Dübellänge 25 – 80 mm Nennleistung: 1 Dübel/Sekunde (inklusive Leimauftrag) Verwendet PVAC-Leime (Leime auf Wasserbasis), Viskosität 200–400 mPa·s 1 Stück LEIMTANK, Fassungsvermögen 8 kg 1 Stück WASSERTANK, Fassungsvermögen 8 kg Maximaler Druck: 5 bar

Kondisi: diremaj di bengkel (bekas), DOUBLE-SIDED EDGE-BANDING AND FORMATTING MACHINE – 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transmission bar (Master & Slave systems) Safety and noise protection cabin FORMATTING UNITS (per side): Spray unit (for liquid anti-adhesive) Exchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (per side): Edging unit (Hot Melt + pre-melter) 04.1570 Edge pressure zone Dksdedh Tfgepfx Aaqol Edge magazine for rolls (compartment No.) 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flat scraper unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space