Penggergajian lengkap (stasioner)Brenta
Verticale bandzaag / automat. draaiwagen
Penggergajian lengkap (stasioner)
Brenta
Verticale bandzaag / automat. draaiwagen
EXW VB ditambah PPN
€79.985
Tahun pembuatan
1986
Kondisi
Bekas
Lokasi
Beilen 

Gambar menunjukkan
Tampilkan peta
Data mesin
- Nama mesin:
- Penggergajian lengkap (stasioner)
- Pabrikan:
- Brenta
- Tahun pembuatan:
- 1986
- Kondisi:
- bekas
- Fungsi:
- berfungsi sepenuhnya
Harga & Lokasi
EXW VB ditambah PPN
€79.985
- Lokasi:
- Beilen, Belanda

Hubungi
Rincian penawaran
- ID iklan:
- A21600703
- Pembaruan:
- terakhir pada 26.03.2026
Deskripsi
We offer this used Brenta vertical bandsaw with automatic turning carriage.
Year of manufacture: 1986
Vertical saw:
Type Tuonyelec Machine no.: 407482 S230 N8586
Wheels: 125 cm
Saw carriage:
Type Progress 750 Machine no.: 409621 S268 N1143886
Maximum sawing length: 12 metres
The various photos show:
- overall view of the saw
- saw machine nameplate
- saw with extraction pit
Nwedpsyxhq Usfx Abvjd
- automatic line behind the saw
- pit under the lower wheel
- infeed line from outside
- infeed line seen from inside
- outfeed line inside
- extra return rack for resawing pieces. This rack can return the log onto the carriage using a chain
- collection tray behind the outfeed line
- collection tray viewed from the other side. With red button, operable from here and in machine room
- total view of the outfeed line
- nameplate of saw carriage
- saw carriage in outside position, where the log can be loaded
- control room behind the saw
- control room interior. Electronic size setting and operation of all infeed and outfeed lines
- wall-mounted electronics on the opposite side of the saw. Control circuit with relays, also operable manually
- Compressor Atlas Copco GX 11 FF
- Compressor nameplate, year of manufacture: 2005
- Air dryer Grass Air type DW 31
- Stellite setting blocks for the guides where the saw blades run through
Technical information:
- the machine requires connection to air, hydraulics, power (and control circuit)
- the wheels (upper and lower) were ground about three years ago and are fit for many more years of use
- control cabinet for infeed conveyor renewed in 2025
- at the end of the infeed line there is a crosscut saw, capable of crosscutting cants, boards, or beams. Electronically adjustable thickness.
This Brenta vertical bandsaw with automatic turning carriage is an excellent combination.
The listed price is based on the incoterm EXW, with dismantling to be carried out by the buyer.
If you have any questions or require further information, please feel free to send us a message or call us.
Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.
Year of manufacture: 1986
Vertical saw:
Type Tuonyelec Machine no.: 407482 S230 N8586
Wheels: 125 cm
Saw carriage:
Type Progress 750 Machine no.: 409621 S268 N1143886
Maximum sawing length: 12 metres
The various photos show:
- overall view of the saw
- saw machine nameplate
- saw with extraction pit
Nwedpsyxhq Usfx Abvjd
- automatic line behind the saw
- pit under the lower wheel
- infeed line from outside
- infeed line seen from inside
- outfeed line inside
- extra return rack for resawing pieces. This rack can return the log onto the carriage using a chain
- collection tray behind the outfeed line
- collection tray viewed from the other side. With red button, operable from here and in machine room
- total view of the outfeed line
- nameplate of saw carriage
- saw carriage in outside position, where the log can be loaded
- control room behind the saw
- control room interior. Electronic size setting and operation of all infeed and outfeed lines
- wall-mounted electronics on the opposite side of the saw. Control circuit with relays, also operable manually
- Compressor Atlas Copco GX 11 FF
- Compressor nameplate, year of manufacture: 2005
- Air dryer Grass Air type DW 31
- Stellite setting blocks for the guides where the saw blades run through
Technical information:
- the machine requires connection to air, hydraulics, power (and control circuit)
- the wheels (upper and lower) were ground about three years ago and are fit for many more years of use
- control cabinet for infeed conveyor renewed in 2025
- at the end of the infeed line there is a crosscut saw, capable of crosscutting cants, boards, or beams. Electronically adjustable thickness.
This Brenta vertical bandsaw with automatic turning carriage is an excellent combination.
The listed price is based on the incoterm EXW, with dismantling to be carried out by the buyer.
If you have any questions or require further information, please feel free to send us a message or call us.
Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.
Penyedia
Catatan: Daftar gratis atau masuk, untuk mengakses semua informasi.
Terakhir online: Hari ini
Terdaftar sejak: 2026
1 Iklan online
Kirim permintaan
Telepon & Faks
+31 6 558... iklan
Iklan Anda telah berhasil dihapus
Terjadi kesalahan










































