Pengukur kelembapan

Brookhuis FMI

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Machine in very good condition, little usage – fully equipped. Additionally, 20 saw blades included in the set. SPECIFICATION: WRAVOR BAND SAWMILL Type 1225 AC (angled cut) Max. log width: 1250/1090 mm Max. cutting length: 8 m Main motor: 45 kW Cast wheels Cast wheels, width: 130 mm Wheel diameter: 1200 mm Head raise/lower – double TR60x9 (18) ball screws + 11 kW Danfoss inverter + Siemens 3F motor with brake Electric head lift & lower motor: 11 kW Saw blade: PV 45, length: 8685 mm, thickness: 1.2 mm, width: 140 mm/150 mm Blade movement drive with electronic controls for forward and reverse, SEW reducer with flat asynchronous controller KA87 / GDRL100L 4BE5 / TF / ES7S / V Manual-sensor thickness adjustment with electric cut-off Digital thickness setting with Wravor V280 program Hydraulic unit 40 l, tank with two pumps 13+6 l + 3 kW motor Complete hydraulic system Hydraulic blade guide left/right HIWIN linear system Kdjdpfx Aajw E Ei Ueyew Hydraulic pre-cutter / bark blade 1 Hydraulic board removal arm 1 Additional hydraulic board removal and alignment arm Side-mounted control panel Multifunction joystick, 2 positions: 1 Multifunction joystick, 4 positions: 1 Laser 15 mW: 1 Cameras: 3 Fan 2.2 kW + 15 m sawdust extraction pipe + 4 pipe stands: 1 Water cooling – automatic hydrophore cooling (Aki Tech high-pressure pump): 1 Prepared for ramp and automatic table + diverter: 1 Diesel lubrication: 1 TRACK Welded frame, length: 14 m Hydraulic clamp with two cylinders: 6 Hydraulic wedge lifter: 6 Mechanical supports: 2 Hydraulic roller – forward: 6 Log lifter on holder – mechanical roller: 4 Log lifter on holder – hydraulic roller: 7 Set of lift rollers: 7 hydraulic + 4 mechanical: 1 Hydraulic log turner – new type: 3 Centric log aligner – complete: 4 Hydraulic unit 120 l, tank with one 50 l pump, 15 kW motor + Danfoss inverter: 1 Cable carrier with energy chain: 14.5 m C-profile bracket for ventilation – 4 double trolleys Belt output conveyor 4 m with 1 m feed + 3 kW electric motor, front end with hydraulic lift

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SK-K-24001, 1 optimised cross-cutting system with scanner manufacturer: dimter type: opticut 450 year of manufacture: 2015 item no.: sk-k-24001 dimter cross-cutting system with 1 x opticut 450 and f 100 infeed system including luxscan combiscan+ c 200 with curvature measurement the system was in operation until 2024, has been professionally dismantled, and is available for inspection in its current condition. Kdedpfowya Syox Aayjw

Kondisi: bekas, Tahun pembuatan: 2007, 3177 Optimizing Cross-Cut Saw Grecon Dimter OptiCut 200-1 Used, Year of manufacture: 2007 For cutting fixed lengths Processable wood dimensions: Infeed length min./max.: 3000 - 5000 mm Infeed width min./max.: 80 - 200 mm Infeed thickness min./max.: 38 - 80 mm Max. wood cross-section: 200 x 50 mm Finished wood length min./max.: 700 - 1000 mm Average number of cuts/board: 5 Suitable wood types: Softwood or hardwood Performance of the system: Feed speed max.: 180 m/min, infinitely variable Time per cut incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor before saw Length 1.5 m, coupled with the saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version With integrated length measuring wheel and integrated blow-off device for waste Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station with drive unit, without ejector Conveyor length approx. 1.5 m Machine already dismantled and in storage The infeed table was not used by the previous owner. Two feed rollers were installed for material feed. The feed table is present, only the rubber belt is missing. Sale on behalf of a customer, ex location Austria, excluding transport and installation Subject to error in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale is made as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale For used machines, all warranties are excluded; the following applies: “sold as seen” Pictures and videos are for illustration purposes and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Kdodju Atmuspfx Aaysw Delivery terms: ex location

Kondisi: baru, Tahun pembuatan: 2024, MULTILAME ANGOMAC SOLID Kdodoh Ia Upspfx Aayjw 600 MM PASSAGE WIDTH CUTTING HEIGHT UP TO 120 MM MAXIMUM CUTTING WIDTH 480 MM

Kondisi: baru, Spindle diameter: M6 - M24 mm Speed: 200 rpm Radius: 1200 mm Angle adjustable from 0 to 90 degrees Machine weight: approx. 0.4 t Space requirements: approx. 1.4 x 0.1 x 0.7 m --- Electric Tapping Machine / 4450124SET Fast and accurate thread cutting with freely positionable articulated arm Kdsdeg N Nl Djpfx Aayow - Machine head swivels from 0 to 90 degrees - Quick-change chuck with overload clutch for safe threading without risk of breakage - Clockwise/anti-clockwise rotation selectable on the machine head - Adjustment of thread size, speed, pitch and cutting depth via touchscreen on the articulated arm - Manual mode: After reaching the preset cutting depth, the spindle stops automatically; forward and reverse must be activated manually. - Automatic mode: After reaching the preset cutting depth, the machine automatically switches from forward to reverse – ideal for tapping multiple blind holes. Includes 1 tapping chuck each: GT24 M6, M8, M10, M12, M14, M16, M18, M20, M22-24 Base frame: 900 x 600 x 875 mm

Kondisi: baru, 3183 Vacuum Dryer / Drying Chamber ISVE ES 3 / NEW New machine, delivery time: 120 days Design Features: Stainless steel AISI-304, partially insulated Outer diameter: 1,300 mm Length of cylindrical section: 5,000 mm Dryer length: 5,900 mm Total dryer length with rails: 11,000 mm Max. operating vacuum: -730 mm Hg Stacked timber length: 5,000 mm Stacked timber width: 800 mm Stacked timber height: 790 mm Net timber volume: approx. 2.5 m³ Installed electrical power: 8.80 kW Average hourly power consumption: 4.4 kWh Kdjdsu Tipkopfx Aaysw Included: - 9 electric heating plates (each 800 x 5,000 x 10 mm LWH / 40 kg / 0.695 kW) - 1 oil vacuum pump (65 m³/h / 1.8 kW / 380 V AC) - 1 vacuum pump condenser (stainless steel pipe with internal condensation system) - 2 internal condensers (turbofan, each 0.37 kW 380 V AC) - 2 check valves (one ¾” for the vacuum circuit, one ½” for condenser drainage) - 1 solenoid valve for air recirculation (24 V AC: one 1” for autoclave and one ½” for condenser) - 1 manual air recirculation (1” ball valve) - 1 electrical control unit (PLC type Siemens S7-1200, with touch panel) - 1 ISVE Server Connect with remote maintenance and control - 2 wireless moisture sensors (dual-probe for core and surface moisture measurement) - 1 wireless temperature sensor (for measuring the timber core temperature) - 2 plate holders - 1 operating manual (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5,900 x 1,300 x 2,000 mm LWH Weight approx. 2,000 kg Technical data, year of manufacture, and scope of delivery as stated by manufacturer, subject to change without notice. Prior sale reserved. Manufacturer’s warranty terms apply to new machines. Images and videos are for reference only and do not depict the actual scope of delivery. Payment terms: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex works

Tahun pembuatan: 1999, Kondisi: bekas, en-GB: The DSG 200 vertical sawmill is an ideal solution for woodworking plants specialising in the production of furniture and wooden flooring. It is efficient and performs exceptionally well in operation. A used Wintersteiger mini sawmill is an excellent investment – one of its main advantages is its compact size compared to standard machines of this type, while still providing outstanding performance in material processing. It is designed for cutting components and adjusting them to the required dimensions. The machine is user-friendly and operators can quickly learn to use it proficiently. The key benefit of our sawmill is its comprehensive equipment, most notably the saw blade spray system controlled from the main panel, which enables precise cutting of wet material. The independent adjustment of the upper roller height allows for faster changeover of the cutting height. Pneumatic feed pusher assists material advancement. TECHNICAL DATA: - Total power: 27.3 kW - Air Jet system motor: 2.3 kW - Siemens control panel - Feed rate: up to 2 m/min - Sawmill frame stroke: 210 mm - Number of strokes: 400/min - Infinitely adjustable cutting height on our frame: 45–250 mm - Maximum possible cutting height: 400 mm! - Cutting width with lateral pressure: 80–205 mm - Minimum block length: 250 mm - Lamella thickness from 1.5 mm (depending on wood type and cutting height) - Kerf of used saws: 0.9–1.1 mm (depending on cutting height) - Length: approx. 5000 mm - Width: approx. 1300 mm - Height: approx. 2600 mm Kdedpotvm Hdjfx Aaysw - Weight: 5000 kg - Pneumatic feed pusher Included with the machine: - Complete large saw frame - Small saw frame - Frame pins - Frame tensioning wedges - Saw spacers - Wet cutting saw blades - Dry cutting saw blades - Set of upper drive rollers - 4 lower drive rollers - Full set of slideways - Frame yokes - Pocket cutting guides - Loading magazines - Technical documentation (DTR) - Electrical diagram

Kondisi: bekas, Tahun pembuatan: 2000, Debarking plant Type VK 32 Kdedpewwladsfx Aaysw !! Sale on behalf of customer !!

Kondisi: bekas, Tahun pembuatan: 2004, Used APV Anhydro model PSD 52 stainless steel (AISI 316) spray dryer. Maximum drying water evaporation capacity: 9.3 kg/h at a maximum air temperature of 350 °C. The drying chamber has a diameter of approx. 1000 mm x 700 mm straight side height x 1100 mm conical bottom height. Includes (1) CMT model AF07 rotary atomizer driven by an IBAG motor, 0.7 kW power, impeller diameter 63 mm, speed range 10,000 – 60,000 rpm. Also equipped with an electric air heater (12 kW), cyclone separator with container for dry product, fan, and a main control cabinet with integrated control panel. Ksdpfxeuk Ehxj Aayjdw

Kondisi: baru, Tahun pembuatan: 2024, Crosscut saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Working table inclined by 8° Technical features of the cutting unit: Pneumatic upstroke saw TR500 Motor power 10 HP (7.5 kW), 400V/50Hz TCT blade diameter 500 mm, bore 30 mm, Z=144, S=4.6 Cutting cycle speed: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE FOR LEFT AND RIGHT SIDE Feed via rack-and-pinion system and brushless motor Positioning accuracy +/- 0.4 mm Powerful feed motor for bundle weight of up to 80 kg Maximum feed system speed 90 m/min Pneumatic pusher lift-up at end of cutting cycle and overhead return Data input management: 12” TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Loading and saving of machine parameters via USB port Editing and direct input of cutting cycles (patterns) at controller Transferring cutting lists created on PC via USB or Ethernet port Operating software: Manual entry of load board length Partial optimization without board length reading Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1,000 cutting lists with 11 dimensions or one list with 10,000 consecutive dimensions "OPTI" package: automatic board length detection and full optimization. Piece length reading via photocell Cutting cycle with 6 optimization criteria (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: total optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: “OPTI PLUS” package: for removal of knots and defects Photocell for reading knots and defects during wood mapping Marking with fluorescent chalks/crayons (Note: can only be ordered in combination with ZA250) Pneumatic side clamping device Kjdehw Ng Iopfx Aaysdw