Pompa hidrolik 3 kW 250 bar

Brueninghaus OVS 0 28 DFR/30

Kondisi: baik (bekas), Tahun pembuatan: 1984, 24126 Motorized Solid Bar Twisting Machine + Ring and Arch Bending Machine Technical Specifications: Nedor Ik N Dspfx Ahwowc - Bending process motorized, with automatic or manual operation - Bending capacity for square steel (ST 37) up to approx. 30 mm - Bending capacity for flat steel (ST 37) up to approx. 30 x 8 mm - Adjustable bending length between twisting units up to approx. 1200 mm - Minimum twisting length: 10 x material thickness (long side) - Preselection for bending time and twisting length - Right and left-hand rotation - Tailstock - Arch and ring bending attachment GRB 66 with various roller sets - Bending performance: - Flat steel 60 x 10 mm (vertical): min. radius 700 mm - Flat steel 70 x 12 mm (flat): min. radius 500 mm - Round pipe 1 ½” x 2: min. radius 800 mm - Square tube 40 x 40 x 3: min. radius 1500 mm - Angle 45 x 6: min. radius 600 mm - Round pipe roller sets: steel 1 ¼”, plastic 1 ½” - Standard roller set - Space requirement: approx. W 1850 x H 1300 x D 700 mm - Drive: 400 V / 2.2 kW - Weight: approx. 250 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, daya: 600 kW (815,77 hp), 1 used Weishaupt oil burner ----- Type: WM-L20 / 2-A Version: R Nwodpeuugwcefx Ahwjc NOx Class: 2 Output: 600 - 2,100 kW Oil throughput: 50 - 176 kg/h Year of manufacture: 2010 with WFM 100

Kondisi: bekas, Tahun pembuatan: 2007, Turning diameter: 140 mm Turning length: 615 mm Control: C200-4D Spindle bore: 65 mm Spindle speed: 5,000 rpm Torque at 40% / 100% duty cycle: 145 / 105 kW Turret slides: 1, 2, and 3 X-axis travel: 110 mm Z-axis travel: 360 mm Y-axis travel: 70 mm Rapid traverse X/Y/Z: 25/12/45 m/min Nsdpfswzynqex Ahwowc Slide travel X-direction: 150 mm Slide travel Z-direction: 600 mm Spindle speed: 5,000 rpm B-axis (correction axis): +/- 1° Tool turret - number of stations: 3 x 12 Tool holder DIN 69880 VDI 25 x 48 C-axis: 0.001° Total power requirement: 61 kW Machine weight approx.: 6.5 t Space requirement approx.: 9.75 x 3.10 x 2.85 m Loading: Multi-channel bar feeder Breuning Profimat 65.8x270/8, year 2005 for bars with lengths from 500 to 3,000 mm, 8 guide channels with spindle liner tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: Workpiece unloading device BREUNING ILS-REX-7208, year 2007

Kondisi: baik (bekas), Tahun pembuatan: 2014, tinggi pusat: 180 mm, lebar di tengah: 600 mm, diameter penggilingan: 260 mm,

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 independent - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled Nedpfxeuhauye Ahwjwc - Counter spindle at position 6.1 EQUIPMENT - CNC control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip evacuation system: KNOLL VRF 500 - Part evacuation with conveyor at position 6

Kondisi: bekas, Set rol untuk mesin pembengkok profil, mesin pembengkok cincin 3-rol HERKULES WETZLAR Rol ini cocok untuk mesin pembengkok profil HERKULES WETZLAR tipe BO 238 N Diameter poros: 60 mm dengan alur pasak 18 mm Nwsdpoglaq Iefx Ahwjc 2 buah rol, set rol no.1, diameter rol = 110 mm, lebar rol = 180 mm 2 buah rol, set rol no.2, diameter rol = 160 mm, lebar rol = 40 mm 3 buah rol, set rol no.3, diameter rol = 150 mm, untuk diameter pipa Ø 33 mm, lebar rol 87 / 115 mm - Set rol no. 3 dengan cincin adaptor dari Ø 93 ke Ø 60 mm tanpa alur pasak Mesin memiliki 2 rol penggerak Berat total semua rol 57 kg kondisi baik

Kondisi: bekas, Tahun pembuatan: 2002, Max. turning diameter: 420 mm Turning length: 1,250 mm CNC Control: INDEX, C 200-4 D Swing diameter: 630 mm Travel X1: 320 mm Travel Z1: 1,250 mm Travel X2: 170 mm Travel Z2: 1,250 mm Travel X3: 320 mm Travel Z3: 1,250 mm Max. main spindle speed: 3,000 rpm Main spindle drive: 53 kW Spindle bore: 102 mm Spindle nose: DIN 55026 size 11 Spindle torque: 675 Nm Counter spindle - max. spindle speed: 3,000 rpm Counter spindle drive: 53 kW Counter spindle - spindle bore: 102 mm Counter spindle - spindle nose: DIN 55026 size 11 Counter spindle - torque: 675 Nm Counter spindle travel: 1,250 mm Feed force X1: 14,000 N / Z1: 14,000 N Rapid traverse X1: 20 m/min / Z1: 40 m/min Feed force X2: 8,600 N / Z2: 14,000 N Rapid traverse X2: 20 m/min / Z2: 40 m/min Feed force X3: 14,000 N / Z3: 14,000 N Rapid traverse X3: 20 m/min / Z3: 40 m/min Number of turret positions, Turret 1 = 12 Number of turret positions, Turret 2 = 10 Number of turret positions, Turret 3 = 12 Number of driven tool stations: 12 / 10 / 12 Max. driven tool speed: 6,000 rpm Torque (driven tools): 36 / 21 / 36 Nm Nwsdot U R Hzepfx Ahwec Tool shank DIN 69880 Tool holder Ø 40 x 63 mm Total connected load: 120 kW Machine weight approx.: 19 t Machine dimensions (L x W x H): 5.77 x 2.47 x 2.62 m Accessories: - HAINBUCH segmented collet chuck on main spindle - HAINBUCH collet chuck, SPANNTOP SP on counter spindle - Various tool holders (including for driven tools) - Chip conveyor - Coolant system Note: All three tool turrets are prepared for through-tool coolant (IKZ), however, the high-pressure system is not included with the machine.

Kondisi: baru, Tahun pembuatan: 2026, The CORMAK HBS275 bandsaw for cutting tubes, profiles, and rods is widely used in all locksmith workshops where precision, quality, and cutting speed matter. The model is equipped with a swiveling arm (0-60°); the saw blade guides are based on carbide inserts. The frame construction ensures accurate and quiet operation. Machine Features: The horizontal metal bandsaw with a swiveling arm allows cutting perpendicular to the axis of the material and at any angle from 0 to 60°. The material can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with specialized carbide plates and bearings. This has a significant impact on blade guidance, lifespan, straightness, precision, and cutting quality. Carbide guidance greatly reduces machine and blade wear. The machine is equipped with a high-performance coolant pump with a closed cooling circuit. The saw arm is made from a single cast iron piece and, together with the 27 mm wide cutting blade used in this bandsaw, fully enables batch cutting of both profiles and solid materials. The vise is placed in an adjustable bed and is equipped with a quick-release clamp. The blade guides are fitted with hard metal (carbide) plates and a rolling bearing system. It is these CARBIDE GUIDES that ensure cutting precision and straightness. The arm features an automatic blade tension sensor and is inclined at 25 degrees, which increases blade longevity. The lower part of the arm is fitted with a cleaning brush for optimal blade cleanliness and function. The machine's drive is transmitted via a worm gear. A cast iron worktable with a swiveling arm and a control panel on a separate arm is attached to the base. During the cutting process, the main cutting motion is performed by moving the cutting blade, with the arm lowering as the feed. The lowering speed (cutting speed) of the arm is adjusted by a hydraulic cylinder. The feed speed is regulated from the saw’s control panel. Two cutting speeds are available: 37.5 and 75 m/min. When the arm is in the lower position (after cutting the material), the blade drive is automatically switched off. Safety is provided by blade guards and micro-switches that stop the motor after the cutting cycle or upon opening any of the guards. Additionally, the bandsaw will automatically switch off if the blade breaks. The machine’s drive is transmitted via a motor with a worm gear. Nodpfx Ajudi Unjhwswc The motor is equipped with a thermal fuse to prevent overheating during operation. Technical Data: TOTAL POWER: 1.5 kW SUPPLY: 400V 50Hz ARM DESCENT ADJUSTMENT: Hydraulic cylinder BLADE LENGTH: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VICE BASE HEIGHT: 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H): 1720 x 800 x 1800 mm WEIGHT: 215 kg CUTTING CAPACITY, ANGLE PIPE RECTANGLE SQUARE 0º ø220 260 x 140 mm 200 x 200 mm 45º R ø160 160 x 140 mm 160 x 160 mm 60º R ø100 120 x 100 mm 100 x 100 mm Price does not apply to machines purchased in Poland.

Kondisi: bekas, TECHNICAL DATA Nwodpouhbpfsfx Ahwoc - Number of spindles: 2 - Number of axes: 8 - Number of turret heads: 2 MAIN SPINDLE - Spindle drive power: 53 / 68 [kW] - Spindle speed: 3000 [rpm] - Max. bar diameter: 102 [mm] - 1 - Free length: 2000 [mm] - Max. main spindle chuck diameter: 420 [mm] - Rapid traverse speed: 30 [m/min] - Minimum C-axis resolution: 0.001 [deg] SUB SPINDLE - Spindle drive power: 50 / 70.5 [kW] - Spindle speed: 3000 [rpm] - Max. bar diameter: 102 [mm] - Rapid traverse speed: 30 [m/min] - Minimum C-axis resolution: 0.001 [deg] LEFT UPPER TURRET HEAD - Number of positions: 12 - Number of driven positions: 12 - Tool holder: VDI 40 - Travel X/Z: 320 x 2,000 [mm] - Travel Y: 210 [mm] - Driven tool speed: 6000 [rpm] - Driven tool power: 17 [kW] RIGHT LOWER TURRET HEAD - Number of positions: 10 - Number of driven positions: 10 - Tool holder: VDI 40 - Travel X/Z: 210 x 2,000 [mm] - Driven tool speed: 6000 [rpm] - Driven tool power: 11.3 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power consumption: 137 [kW] WEIGHT AND DIMENSIONS - Floor space required: 9,000 x 3,500 [mm] - Machine height: 3,000 [mm] - Machine weight: 21,000 [kg] MACHINE HOURS - Operating hours: 34274 [hrs.] EQUIPMENT - Control: INDEX C200-4D (Siemens 840D) - Coolant tank: KNOLL * with high-pressure pump: 80 [bar] * with paper filter - Automatic doors - Chip conveyor: Right

Kondisi: bekas, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 1 MAIN SPINDLE - Spindle nose: ISO 702/1-8 - Spindle drive power: 60 kW - Spindle speed: 3,500 rpm - Max. bar diameter: 102 mm - Max. diameter over bed: 560 mm - Max. main chuck diameter: 315 mm - Minimum C-axis resolution: 0.001° TAILSTOCK - Tailstock type: Numeric - Taper type: ISO 30 - Distance between centers: 1,400 mm - Adjustable pressure: monitored by power MILL-TURN SPINDLE - Travel X/Z: 300 x 1,840 mm - Travel Y: 286 mm - B-axis stroke: 360° - Minimum B-axis resolution: 0.001° - Tool type: HSK63 - Spindle speed: 12,000 rpm - Spindle drive power: 27.5 kW TOOL CHANGER - Tool changer type: Carousel - Number of tools in magazine: 2 x 40 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 100 kVA WEIGHT AND DIMENSIONS - Space requirement: 5,460 x 2,560 mm - Machine height: 3,000 mm - Machine weight: 13,500 kg MACHINE HOURS - Power-on hours: 37,800 h - Mill-turn spindle hours: 7,891 h - Spindle hours: 9,137 h ACCESSORIES - Control: C200-4D (SIEMENS 840D Powerline) - Interface: RS232 / RJ45 - Coolant tank: 900 l * with high pressure pump: 25 bar * with paper filter - Internal coolant supply (IKZ) - Chip conveyor: KNOLL - Oil mist extraction: BÜCHEL SH2000 PEV - Spindle cooling - Steady rest: SMW SLU3 Ø12-152, CNC positioning - 3-jaw chuck: SMW KNCS-N-315-91 - Number of milling tool holders: 72 - Number of turning tool holders: 12 Nsdpfx Ajuhalxohwowc