Gergaji pita

CORMAK HBS275

The CORMAK HBS275 bandsaw for cutting tubes, profiles, and rods is widely used in all locksmith workshops where precision, quality, and cutting speed matter. The model is equipped with a swiveling arm (0-60°); the saw blade guides are based on carbide inserts. The frame construction ensures accurate and quiet operation.

Machine Features:

The horizontal metal bandsaw with a swiveling arm allows cutting perpendicular to the axis of the material and at any angle from 0 to 60°. The material can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with specialized carbide plates and bearings. This has a significant impact on blade guidance, lifespan, straightness, precision, and cutting quality. Carbide guidance greatly reduces machine and blade wear. The machine is equipped with a high-performance coolant pump with a closed cooling circuit.

The saw arm is made from a single cast iron piece and, together with the 27 mm wide cutting blade used in this bandsaw, fully enables batch cutting of both profiles and solid materials. The vise is placed in an adjustable bed and is equipped with a quick-release clamp. The blade guides are fitted with hard metal (carbide) plates and a rolling bearing system. It is these CARBIDE GUIDES that ensure cutting precision and straightness.

The arm features an automatic blade tension sensor and is inclined at 25 degrees, which increases blade longevity. The lower part of the arm is fitted with a cleaning brush for optimal blade cleanliness and function. The machine's drive is transmitted via a worm gear.

Cjdeudi Unspfx Ag Uorh
A cast iron worktable with a swiveling arm and a control panel on a separate arm is attached to the base. During the cutting process, the main cutting motion is performed by moving the cutting blade, with the arm lowering as the feed. The lowering speed (cutting speed) of the arm is adjusted by a hydraulic cylinder.

The feed speed is regulated from the saw’s control panel. Two cutting speeds are available: 37.5 and 75 m/min. When the arm is in the lower position (after cutting the material), the blade drive is automatically switched off. Safety is provided by blade guards and micro-switches that stop the motor after the cutting cycle or upon opening any of the guards. Additionally, the bandsaw will automatically switch off if the blade breaks.

The machine’s drive is transmitted via a motor with a worm gear.

The motor is equipped with a thermal fuse to prevent overheating during operation.

Technical Data:

TOTAL POWER: 1.5 kW
SUPPLY: 400V 50Hz
ARM DESCENT ADJUSTMENT: Hydraulic cylinder
BLADE LENGTH: 2450 x 27 x 0.9 mm
BLADE SPEED: 37.5 / 75 m/min
VICE BASE HEIGHT: 900 mm
MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H): 1720 x 800 x 1800 mm
WEIGHT: 215 kg

CUTTING CAPACITY,
ANGLE PIPE RECTANGLE SQUARE
0º ø220 260 x 140 mm 200 x 200 mm
45º R ø160 160 x 140 mm 160 x 160 mm
60º R ø100 120 x 100 mm 100 x 100 mm

Price does not apply to machines purchased in Poland.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.