Waschanlage für Pulverbeschichtung – 3 S

Bumex Sp. z o.o. Myjnia 3 etapowa

Kondisi: bekas, Tahun pembuatan: 2021, jarak pergerakan sumbu X: 1.270 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 635 mm, gerak cepat sumbu X: 25 m/menit, pergeseran cepat sumbu Y: 25 m/menit, pergerakan cepat sumbu Z: 25 m/menit, panjang pemakanan sumbu X: 1.270 mm, panjang umpan sumbu Y: 508 mm, panjang umpan sumbu Z: 635 mm, kecepatan pemakanan sumbu X: 16 m/menit, laju pemakanan gandar Y: 16 m/menit, laju pemakanan sumbu Z: 16 m/menit, daya nominal (semu): 26 kVA, torsi: 122 Nm, produsen pengendali: HAAS, Used Machining Center Brand: HAAS Model: VF-4 Year: 07/2021 Serial number: 1183245 Operating hours: Spindle on time: 6,000 h Specifications: - Travel (X, Y, Z): 1,270 mm, 508 mm, 635 mm - Spindle nose to table distance (Min. - Max.): 107 – 742 mm - Spindle speed: 8,100 rpm - Taper: ISO 40 - Control: HAAS CNC - HaasDrop (Wireless file transfer to CNC) - Rigid tapping; synchronized tapping with integrated tapping cycles and up to 8 retraction speeds. - Safe Run; a software feature in the Haas Control reducing the likelihood of significant damage if the machine crashes. - Tool changer carousel: 20 stations - Includes early power-fault detection module. - Coolant tank: 208 liters with coolant kit - Variable-flow coolant pump allows programmable coolant flow and pressure via M-codes. - Max. tool diameter (all pockets occupied): 89 mm - Max. tool weight: 5.4 kg - Table dimensions: 1,321 x 495 mm - Max. table load: 1,588 kg - Maximum rapid traverse on all axes: 25.4 m/min Included Options: Kdodpfx Aoxqct Sofiek - Prepared for through-spindle coolant - Auger-type chip conveyor - Programmable coolant nozzle: multi-position device to automatically and precisely direct coolant to the cutting tool

Kondisi: bekas, Tahun pembuatan: 2007, TECHNICAL DATA Travel X-axis: 760 mm Travel Y-axis: 510 mm Travel Z-axis: 610 mm Table clamping surface: 1020 x 510 mm T-slots / table: 5 x 18 mm x 100 mm Distance spindle to table min./max.: 150/762 mm Spindle taper: steep taper DIN 69871 ISO 40 Spindle speeds: 10–10,000 rpm Drive power (30 min/continuous duty): 11 kW Max. torque: 236 Nm Constant power from 500 rpm Coolant tank: 190 l Ball-bearing linear guides in X, Y, Z axes Rapid traverse X / Y / Z: 30 / 30 / 20 m/min Feed rates, programmable: 3.0 – 7,600 mm/min Positioning accuracy: +/- 0.01 mm Repeatability: +/- 0.005 mm Kodpjwud Afefx Afijdk Automatic tool changer (double arm): 24 Internal coolant supply Chip conveyor

Kondisi: baik (bekas), Tahun pembuatan: 2009, Elumatec SBZ 140, Extended Length: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety enclosure Light curtains Automatic clamp detection Central lubrication Cooling spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F adapter, 8-position tool changer. Max. milling diameter: 80 mm Max. saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). Designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilting/rotating A-axis) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis feed rate: X-axis up to approx. 65 m/min, Y and Z axes up to approx. 60 m/min (depending on configuration) Control: 4-axis CNC system, with PC control, color display, USB & network connection. Kdedpfx Afex E Ahzsisk Software: eluCam. Automatic material clamps, automatic positioning via dowel pins. Pendulum/shuttle operation (two work zones), increasing production throughput. Applications include milling, drilling, tapping, sawing, and comprehensive profile processing—all with profiles clamped in a stationary position. Please note: The information on this page has been gathered and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, this does not constitute a representation or contract, and we advise you to verify all relevant details. Financial information VAT/Margin: VAT: The listed price is excluding VAT (VAT deductible for businesses).

Kondisi: baru, Tahun pembuatan: 2026, Vollautomatisches Schneiden von mittelgroßen bis großen Aluminiumprofilen mit benutzerfreundlicher Automatisierung. Legen Sie einfach ein beliebiges Aluminiumprofil ein – die Maschine erkennt es automatisch und schneidet es mithilfe hochpräziser Servomotor-Positionsregelung entsprechend der im Auftrag festgelegten Maße. Excel-Auftragslisten können bequem per WLAN eingelesen werden, wodurch große Schnittlisten effizient verarbeitet werden. Für jedes auf das Förderband gelegte Aluminiumprofil, unabhängig von der Länge, misst ein Lasersensor die tatsächliche Profilänge. Unser leistungsstarker Optimierungsalgorithmus berechnet in Echtzeit die produktionsoptimale Schnittreihenfolge, um Verschnitt auf ein Minimum zu reduzieren. Der Zuschnitt erfolgt vollautomatisch entsprechend der berechneten Schnittliste – ohne Unterbrechung. Kein zusätzlicher Bedienereingriff notwendig, legen Sie einfach fortlaufend weitere Aluminiumstangen zu. Die Maschine ist eine schnelle und unkomplizierte Alternative zu Doppelgehrungssägen: Geben Sie einfach die gewünschten Längen und Winkel manuell ein oder importieren Sie diese und starten Sie den Prozess. Die Maschine fertigt Ihre winkeligen Zuschnitte hochpräzise und in kurzer Zeit. • Vollautomatischer Schneidbetrieb mit Profilzuführung und Längenzuschnitt • Einfache Benutzeroberfläche für automatische Bedienung – Auftrag eingeben und innerhalb von Sekunden starten • Vereinfachter Zuschnitt von Einzelteilen, Serienaufträgen oder umfangreichen Excel-Auftragslisten • Bündel-/Mehrfachstab-Zuschnitt und Stückzählung • Fernübertragung von Excel-Arbeitslisten via WLAN mit umfassender Datenzuordnung • Flexibel einstellbare Schnitt- und Vorschubgeschwindigkeit für maximale Prozessproduktivität • Automatischer Optimiermodus inklusive laserbasierter Längenmessung und Restholzoptimierung für minimalen Verschnitt (optional) Kdjdpfx Afof Ekn Dsisk • Automatisches Etikettendrucken für Zuschnitte basierend auf Auftragsdaten (manuelles Applizieren der Etiketten, optional) • Direktdruck auf das Material inline – keine Bedienhandlung notwendig (optional) • Barcodelabel- oder QR-Code-Druck/bzw. -Erfassung zur Auftragsübermittlung (optional) • Automatisierte Servo-Verstellung des Sägegehrungswinkels bis zu ±75° (optional) Hervorragend geeignet für: • Fenster- und Türenfertigung • Produktion von Gehrungs-Aluminiumkonstruktionen • Fertigung von Aluminiumbauteilen • Produktion von Verbundwerkstoffen • Herstellung von Jalousien, Rollos und Möbelteilen • Verkauf von Aluminiumhandel Modell: A550 Länge: 6 m Lineareinheit: ProfiStop Alpha Materiallänge: 4680 mm Schubkraft: 20 – 40 kg Software: Optimierer QUALITÄT – MASCHINEN AUS AUSTRALISCHER FERTIGUNG.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Kedpfx Afofz U S Eoiodk Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 1999, Kondisi: bekas, Used Decanter / Centrifuge Manufacturer: Baker & Hughes Model: Solid Bowl Scroll Centrifuge Type: CP 3054 Year of manufacture: 1999 Maximum permissible speed: 3,132 rpm Drum inner diameter: approx. 552 mm Drum wall thickness: 14.5 mm Motor: 2 electric motors, scroll drive motor new Control cabinet: no Kodpfecbukrex Afijdk Frequency converter: yes Documentation: yes Maintenance: regularly, twice per year In operation: until early 2015

Kondisi: bekas, Tahun pembuatan: 2014, ⚡️ Top service ⚡️ Fast delivery ⚡️ Excellent support! ✳️Preserve your liquidity! We offer a wide range of financing models to ensure your investment gets the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs.✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ✅Scope of supply ►1 unit – Large gas-heated powder curing oven ►1 unit – Automatic powder coating booth ►1 unit – Small electrically heated powder curing oven ►1 unit – Manual mono-cyclone powder coating booth ►1 unit – Room-type manual mono-cyclone powder coating booth ►1 unit – Automatic chemical pre-treatment and drying line ►6 units – Automatic powder coating guns ►3 units – Manual powder coating guns ►1 unit – Automatic powder recovery unit ►5 units – Mono-cyclone ►1 unit – Automatic control panel ►1 unit – Automatic bar transfer system, speed controlled ►2 units – Mobile platform, speed controlled ►12 units – Parking station ►300 m – Conveyor rail ►12 units – Suspension bars Kjdpfxoiivq Uj Afiedk Our facility is located at Anhaltstr 30, 14943 Luckenwalde. You are welcome to schedule an appointment to view the equipment. The system has been in operation for 8 years. As the direct manufacturer of the plant, we can, by mutual agreement, carry out modifications to the machines as you require. Doesn't fit into your existing installation space? We can adjust the layout accordingly. Please check the system's PDF file using the link below.

Tahun pembuatan: 2026, Kondisi: baru, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency Kdsdpfx Ajfy T H Isfiek - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Kondisi: baru, Tahun pembuatan: 2025, panjang total: 1.600 mm, lebar total: 2.200 mm, tinggi total: 2.350 mm, berat keseluruhan: 250 kg, jenis arus masuk: tiga fasa, lebar kerja: 1.400 mm, Paint booth, spray wall, extraction unit TQN1414 With right- or left-side exhaust. Working dimensions (mm): 1400 (W) x 1400 (H) x 800 (D) Overall dimensions (mm): 1600 (W) x 2350 (H) x 1250 (D) SPECIFICATION: • Fan power 1.5 kW • Capacity 6,500 m³/h • 2 x 100% polyester filters • Filtration efficiency of 99.9% • IP 66 control panel • Automatic filter cleaning • Hermetic lighting, IP 65 • Paint tank Kdodpod S N I Nefx Afiek Booth available immediately (in stock) CHOOSE BUMEX SP. Z O.O. Very high-quality machinery among those offered on the market. Professional consultation and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All products of the BUMEX SP. Z O.O. brand are EC-certified. We offer our own transport – prices are specified for each individual offer. We issue invoices with VAT shown separately. Short delivery times! Possibility to order machines in various, customised configurations and dimensions! Please contact us.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, CNC HAAS VF-2SS 2011 2 UNIT CNC HAAS VF-2SS 2011 Kodpfxjyh Rwxe Afiedk FUNGSIONAL