Bilik bedak TQB2018

Bumex Sp. z o.o. TQB2018

Kondisi: baru, Tahun pembuatan: 2026, Crosscut saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Worktable inclined at 8° Technical features of the cutting unit: Pneumatic upstroke saw TR500 Motor power: 10 HP (7.5 kW), 400 V/50 Hz TCT blade diameter: 500 mm, F=30 Z=144 S=4.6 Cutting cycle time: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed by rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for a bundle weight of up to 80 kg Maximum speed of the push-feed system: 90 m/min Pneumatic lift of the pusher at the end of the cutting cycle and overhead return. Data entry management: 12-inch TOUCH SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Loading and saving machine parameters via USB port Edit and enter cutting cycles (patterns) directly on the controller Transfer of cutting lists created on PC via USB or Ethernet port Working software: Manual entry of bundle length Partial optimization without board length reading Cutting cycle with 3 optimization options (maximum length, sequence, and board sequence) Gisdpshw Ng Iefx Abhen 1000 cutting lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization. Piece length reading via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board sequence, volume, minimal waste, and priority length) "OPTI PLUS" package: full optimization with knot and defect removal (OPTION NOT INSTALLED ON THIS MACHINE) Technical description: "OPTI PLUS" package: for the removal of knots and defects Photocell for reading knots and defects for wood mapping Marking with fluorescent chalks/crayons (Note: Only orderable in combination with ZA250) Pneumatic side clamping device Program for creating lists on PC in XML format

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Gedpfx Abefzktzjhein Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Kondisi: baru, Tahun pembuatan: 2025, Output capacity: 25 and 40 kg/h Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Hopper volume: 0.38 m³ Power consumption: 4 kW Machine length: 1,860 mm Godpfopfatpox Abhsin Machine width: 890 mm Machine height: 1,100 mm Weight: 400 kg

Kondisi: baik (bekas), Tahun pembuatan: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of Manufacture: 1990 In good condition The SP700 series from Randek is a reliable saw designed for roof truss and house manufacturers worldwide. Gisdpfeh Ayyqox Abhsn The SP700 saw is efficient, easy to operate, and precise. It has long been established on the market and is continuously improved in close collaboration with numerous customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you require. The large saw blade diameter (700 mm) also allows you to cut multiple sections of stacked timber simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cycle - PLC-programmable saw - Wood fixation close to the cutting area for precise results Roller conveyor system with 5 adjustable pneumatic stops. Length 6.25 m Discharge roller conveyor 4.10 m Complete line: 11.5 m Technical information subject to change.

Kondisi: sangat baik (bekas), Nomor katalog 6726 DATA TEKNIS Gijdsignt Uopfx Abhen - Inlet corong pengisian: 280x300 mm - Outlet kayu hasil pencacahan: Ø 310 mm - Lebar kerja rotor: 340 mm - Motor utama: 22 kW - Jumlah pisau: 6 buah - Dimensi (P/L/T): 1300x1150x1680 mm - Berat: 720 kg KEUNGGULAN – Kondisi sangat baik – Mesin pencacah bekas Harga netto: 19.900 PLN Harga netto: 4.740 EUR Harga netto dihitung menurut kurs 4,2 PLN/EUR (dalam hal fluktuasi kurs yang signifikan harga dapat berubah)

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, kebutuhan udara: 1,13 m³/jam, tekanan: 7 batang, masa garansi: 24 bulan, lebar total: 1.370 mm, tinggi total: 2.080 mm, panjang total: 1.150 mm, berat keseluruhan: 350 kg, Perlengkapan: kabin, pencahayaan, The Vapormatt PUMA is a high-quality, versatile manual wet blasting cabinet manufactured by Vapormatt, the leading company in the wet blasting sector and the inventor of this technology in the 1950s. With over 70 years of ongoing development in wet blasting, Vapormatt has produced an ergonomically designed and highly efficient machine: the Vapormatt PUMA. The use of an optional basket allows for the processing of small series parts, while a clamping fixture enables easy processing of rims or wheels. Large workpieces weighing up to 125 kg can be positioned on the robust stainless-steel grate. An optional stainless-steel rotary table ensures easy handling. The integrated recirculating water system with cascade tank, filtration unit, and return pump ensures economical use of water and blasting media. Wet blasting, thanks to its water-based carrier, provides gentler and more uniform processing compared to sandblasting. With this technology, you can achieve smooth and even surfaces on your components. Technical Specifications: - Internal dimensions: 1100 x 1100 x 1200 mm (LxWxH) - External dimensions: 1400 x 1200 x 2100 mm (LxWxH) - Pump output: 2.2 kW (400 V / 50 Hz) - Sump volume: approx. 142 L water / approx. 15-40 kg blasting media - Load capacity of working surface: 125 kg Prices are net, exclusive of the currently applicable statutory VAT and shipping costs. The images may show the unit including accessories that are optionally available and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to provide you with advice, free of charge and without obligation. Gijdpfx Astqmh Eebhon The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. The contract negotiation is concluded via telecommunication (email, telephone, messaging portal). As an initial step, we will provide you with a non-binding offer, which includes information about our General Terms and Conditions, imprint, and your right of withdrawal, before any purchase or contract is completed.

Kondisi: diremajakan ulang (bekas), Edwards GV250 is, following the general overhaul: - in absolutely as-new condition - inspected according to manufacturer specifications, with all clearances and measurements within tolerances - fitted with new wear parts - available at short notice Godpfx Aofq Rgiobhjin - includes a one-year warranty

Kondisi: baik (bekas), Tahun pembuatan: 1984, Special offer!!! Mawera FU300 R wood-fired boiler, model with 350 kW. Combustion chamber, heat exchanger, piping, boiler with auger screw conveyor, rotary valve, ash removal with filter, fan, control system, complete documentation, etc. Inspection in Hungary possible at any time. Already dismantled! Gedpfx Absd Da Nnjhjin

Kondisi: baik (bekas), Tahun pembuatan: 1989, Pressing area 2550 x 1350 mm Number of press cylinders: 6 Total pressing force: 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz Total connected load approx. 26 kW Required space (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5,500 kg Hydraulic heating platen press Bottom cylinder design Electrically heated platens Press pressure steplessly adjustable via pressure switch Hydraulic pump Central control panel with all controls Digital temperature display for both heating platens Press cycle counter Emergency safety cable Rack compensation gear Giedpfxowd N Rmo Abhsn Main switch Note - Used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex works, loaded free of charge. • The machines have been cleaned and function-tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect machines at our premises. • Special agreements must be in writing. (We only respond to enquiries that include your address & phone number!)

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 3.450 kg, jenis bahan bakar: diesel, kapasitas tangki: 500 l, warna: putih, arus keluaran: 360 A, tegangan keluaran: 400 V, frekuensi keluaran: 50 Hz, jenis arus keluaran: tiga fasa, daya nominal: 270 kW (367,10 hp), daya kontinu: 250 kW (339,91 hp), panjang total: 3.650 mm, lebar total: 1.300 mm, tinggi total: 1.850 mm, kecepatan rotasi (maks.): 1.500 rpm, produsen motor: Ricardo, Cummins, jenis pendinginan: air, jenis arus masuk: tiga fasa, Three-phase stationary power generator Proton ZPP 250 (250kW - 270kW) in a compact, weatherproof, and additionally soundproof enclosure. The generator features an external ATS (Automatic Transfer Switch / Autostart) system, as well as many other functions detailed further in the description. • Model – Proton ZPP 250R ATS • Maximum power - 270 kW / 300 kVA • Rated power - 250 kW / 340 kVA • Ready for work - Yes (filled with fluids, test run performed) • Type – Industrial generator • Condition - Brand new • Manufacturer - Proton • Generator type - Three-phase • VAT invoice 23% • Year of manufacture - 2024 • Warranty - 36 months ⊳ ENGINE: Engine model - 6D10D315A-Turbo (British Series) Fuel type - Diesel Consumption: - 47.0 liters per hour (at 75% max power) - 34.0 liters per hour (at 50% max power) Engine configuration - Inline (R4) Displacement - 9700 cc3 Direct injection Lubrication system - Forced, engine with oil pump ⊳ ALTERNATOR: 100% copper windings AVR voltage regulator - Yes Alternator model - Proton 444D Rated power 400V - 250,000 Watts (250kW / 300kVA) Maximum power 400V (up to 15 minutes) - 270,000 Watts (270kW / 2340kVA) Rated power 230V - 83,000 Watts Maximum power 230V (up to 15 minutes) - 90,000 Watts Rated current (400V) - 360.0 A Giodpfx Aotp Tfwebhjn Current protection devices - C16, C32, main - 400A Frequency - 50 Hz Alternator construction - Synchronous ⊳ ENCLOSURE: Sound-attenuated enclosure Weatherproof enclosure Three-phase and single-phase sockets Fuel tank capacity - 500 liters Operating time on full tank (average) - 20 hours Transport set - Forklift pockets and HDS lifting eyes Dimensions 130 x 365 x 185 cm Gross weight - 3450 kg ⊳ FEATURES: Voltage regulator (AVR) - Stamford SX460 (2%) - electronic voltage stabilization under varying load - electronic frequency stabilization Automatic generator operation via ATS (Automatic Transfer Switch) Overload and thermal protection Oil pressure, oil level, and coolant level sensors Glow plugs Oil sump heater Coolant heater Battery - 2 x 140Ah Automatic battery charger ⊳ CONTROLLER: Controller model - Comap InteliLite 4 AMF 20 Hour meter Ammeter Voltmeter Built-in PLC logic and PLC editor Overload protection CAN module extensions SCADA system integration Additional outputs - 4G, Ethernet, RS232/485 connectivity Remote monitoring and control via GPRS (optional) Modbus, Ethernet communication (optional) Why choose us? We are a company specializing exclusively in power generators, operating in this sector for over 17 years and constantly striving to offer top-quality and highly reliable products. During this time, we have delivered solutions to over 10,000 clients across Poland, including its most remote regions. We meticulously select component suppliers, ensuring they are leaders in their respective industries. We offer a wide range of generators from 6 to 300kW with various engines, including English Ricardo, American Cummins, or German Deutz, as well as a variety of configurations tailored to customer requirements.