Mesin pengikat tepi

Casadei E550F

Kondisi: baru, Tahun pembuatan: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application to straight workpieces (EVA-PUR glue pot with run-off function optional), HF end trimming station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking, and integrated distance control for contactless activation of processing functions. Suitable for ABS, PVC, melamine and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 / 6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying • 3 free spaces for finishing units • 10" color touchscreen. Ledpfx Aasw I U Drerort Machine length: 4,030 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0 – 2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1,050 kg Options: • Surcharge for radius scraper unit with air blast device + extraction • Surcharge for flat scraper unit + extraction • Surcharge for buffing unit • EVA/PUR glue pot with run-off function • Surcharge for diamond tools, height = 65 mm for pre-milling unit • Riepe spraying system (anti-adhesive) at pre-milling unit • Riepe spraying system (cleaning spray before buffing unit) • Piping system with 90° bend + manual slide valve, mounted on the machine with D=200 mm Availability: short notice Location: Hochheim

Kondisi: bekas, nomor mesin/kendaraan: 007645, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Lodpfswuz Niox Aarert Joint trimming: yes Multi-function unit: yes Top trimming unit: yes Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Working units: 9 units

Kondisi: baru, Holzprofi Maker clean-air extraction unit with double chip filtration. The initial cleaning stage is performed via a cyclone separator, and the secondary filtration is done through a filter cartridge. Includes remote control. Nominal air flow rate 3700 m³/h Extraction nozzle diameter 200 mm Manifold 200/100/100/100 mm Vacuum pressure 2800 Pa Motor rated power 3 kW 400V Chip collection capacity 240 liters Lodjvrv Amepfx Aarort Weight 170 kg Dimensions (W/D/H) 1200/820/2150 mm Filter area 4.32 m² Recommended chip bags: AB-SP300 AB-SP100

Kondisi: baru, Tahun pembuatan: 2026, Minimum / Maximum veneer thickness: 0.4 - 3 mm Minimum / Maximum veneer height: 12 - 47 mm (optionally up to 60 mm) Minimum / Maximum material height: 10 - 45 mm Minimum material width: 100 mm Minimum material length: 100 mm Pre-milling unit: 2 motors (diamond cutters), each 2.2 kW Feed motor power: 2.2 kW Eye-level control panel: Chain feed system: Pressure plate for PVC and ABS edging: Mechanical pressure zone driven by the main pressure roller and a set of pressure rollers to minimize the glue layer: Central pressure adjustment: Glue granulate container: Application of glue to the material with a glue roller: Electronic temperature control, working temperature 180 - 200 °C Pneumatic end trimming unit: Element gap indicator: Dual cross-cut saw for trimming excess material at the front and rear: Precision linear guides: Dynamic cutting for high cutting accuracy: Veneer feed speed: 9.5 m/min Flat and round milling top / bottom with vertical and horizontal guidance 2 x 0.55 kW, 12,000 rpm Scraper unit: Polishing unit top/bottom 2 x 0.18 kW, 50 Hz, 2800 rpm Height and tilt adjustment: Exhaust ducts 3 x ø120 mm, 1 x ø100 mm Roller table extension: 250 mm Soundproof enclosure with viewing window at the aggregates: Milling unit: 0.44 kW Glue roller unit: 0.55 kW Glue tank heating: 2.2 kW Compressed air connection: 6.5 bar Total connected load: 9 kW / 400 V Dimensions (L x W x H): 3590 x 1220 x 1686 mm Weight: 1100 kg • Pre-milling with counter cutters positioned on heads for highest processing quality. • Front and rear end-trimming with double saw. • Top and bottom edge milling with separate cutter. • Radial or straight scraper (choice). • Polishing unit. • Equipped with a control computer with LCD display. • Very easy operation by switching individual units on/off at the press of a button. Lredpfxjv Dutbe Aarjt • In summary, an ergonomic and precise machine at a very attractive price, unrivaled on the global market. • Interchangeable glue tank function as standard.