Moulder

Casadei MATRIX 4+1

Four-sided Planer Moulder, 4 Spindle + Universal Spindle, 2.50m Infeed Table & Reinforced Motors

Brand: CASADEI Model: MATRIX 4+1
Serial No.: 02-84-022 Year: 2002

WORKING CAPACITY (thickness x width): 6 to 155 x 25 to 230 mm
- Four-sided planer and moulder
- Working width: 25 to 230 mm
- Working height (wood thickness): 6 to 155 mm
- Max. finished wood section: 155 x 230 mm
- Minimum working length: 480 mm
- Adjustable stock removal up to 10 mm
- Spindle rotation speed: 6,000 rpm

Hfedpfx Aou Sr Ivsdqsn
MACHINE CONFIGURATION:
- Sturdy welded steel frame
- Sound-insulated panoramic hood with gas struts
- Elevated operator-side control panel
- Steel infeed table 2500 x 250 mm
Table height from floor: 880 mm
Lateral spring-loaded infeed pressure shoe
Manual table lubrication unit located after jointer
1) Bottom horizontal spindle 5.5 kW
TERSA cutterblock Ø 125 x h.240 mm
1 retractable vertical pressure roller
2 & 3) Right and left vertical spindles 1 x 7.5 kW each
TERSA cutterblock Ø 125 x h.165 mm
4) Top horizontal spindle 7.5 kW
TERSA cutterblock Ø 125 x h.240 mm
- Adjustable outfeed pressure shoe
5) Universal spindle 7.5 kW
Ø 40 x 255 mm
1 retractable horizontal pressure roller

FEED SYSTEM:
- Feed with inverter: 5 to 25 m/min
Feed motor: 1.1 kW (1.5 HP)
- 8 independent pneumatically-pressurized feed rollers:
2+2 grooved steel rollers followed by 2+2 rubber-coated rollers

OTHER FEATURES:
- CE Certification
- Main power supply: 380V, 3-phase, 50 Hz
- Lockable disconnect switch, automatic star-delta starting
Emergency stop front/rear
- Installed power: 37 kW (50 HP) IN 62A
- Braked motors
- Spindle drive by transmission shafts
- Digital indicators (Siko-type counters) for precise manual setting of each operation
- Electric rise and fall for thickness beam adjustment,
Rise/fall motor: 0.37 kW
- Axial adjustment of spindles:
Bottom horizontal: 0 to 15 mm
Top horizontal: 0 to 25 mm
Vertical spindles: 0 to 25 mm
- Acceptable tool dimensions:
On bottom horizontal spindle: Ø 120 to 140 mm
For profiling on vertical spindles: Ø 100 to 180 mm
For profiling on top horizontal spindle: Ø 100 to 180 mm
End-milling cutter: Ø140x12x40 mm
- Recommended pneumatic supply: 7 bar
Working pressure: 6 bar
Average consumption: 0.85 Nl/cycle
Connection: 1/2" G
- Extraction, central upper port: Ø 250 mm
Required air speed: 25 m/sec minimum Flow rate: 4500 m³/h
- Technical manual included.
- Machine equipped with 4 TERSA spindles

Footprint: 4700 x 1700 x h.1800 mm
Weight: 2240 kg
Please contact us for the supply of consumables, accessories and/or extraction systems.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.