Band saw

CENTAURO CO 900

Kondisi: bekas, Used 900 band saw with 5 HP motor. Ksdowtl S Sopfx Aayodw

Kondisi: baik (bekas), Tahun pembuatan: 1996, EN-KRUSI-Chalet-Construction-Machine-Blockhouse-Production-Line- Type-CM-40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / operational Operating principle: Processing of structural timber for chalet construction / log house manufacturing Beams can be machined in a single pass • Cross-cutting • Horizontal and vertical milling of tenons / grooves in one clamping • Drilling • Milling of face grooves Workpiece: • Maximum cutting height: 200 mm • Maximum cutting width: 250 mm Robust welded steel construction. Machine (horizontal and vertical milling units) with 4 special milling motors, with hardened and ground linear guides for highest machining precision. Carriage runs on dust-protected and preloaded ball bearing guide rollers. Working area up to 200 x 250 mm. Fully operational, with contactor control system. Motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for external chip extraction, with 2 eccentric clamps, without milling tool (rebate cutter). With electro-controlled hydropneumatic horizontal and vertical feed, feed is synchronized with the start of the milling motors. Rapid traverse and feed rate continuously adjustable. Completely wired and installed, including air maintenance unit. Timber thicker than 14 cm must be machined in two passes. Such pieces must be repositioned to compensate for the excess thickness for second milling. Machine safety covers over moving parts with gas spring counterbalancing. Machine description / equipped with: 1. Sawing unit: Manual feed Spindle adjustment with analog gauge Max. saw blade diameter / bore: 400 / 30 mm Carbide-tipped with chip depth limiter (downcut) Adjustable riving knife Motor speed: min-1 / 2900 Power: 2.2 kW 2. CM milling unit (log house unit) Hydropneumatic feed Spindle adjustment with digital display Horizontal milling unit: Cutter diameter: 180 mm Max. cutter width: 130 mm (For cutter width from 60 mm, only use cutters made of aluminum alloy with indexable inserts) 2 motors, hydropneumatic feed, each 2.2 kW Hydropneumatic feed Rapid traverse and feed rate infinitely variable 3. Drilling unit: Manual feed Spindle adjustment with analog indication Collet chuck: ER 25 Clamping diameter max: 16 mm Drill diameter max: 32 mm Motor: min-1 1450, 1.8 kW 4. Face-milling unit Hydropneumatic feed Spindle adjustment with digital display Max. cutter diameter: 230 mm Max. cutter width: 60 mm Motor: min-1 / 2900, 3.0 kW 2 v-belts SPZ 9.5x1000 La Pneumatics: Customer-side operating pressure min/max: MPa (bar): 0.7/1 (7/10) Compressed air consumption: 8 Nm3/h Electrics: Operating voltage: V / Hz 380, 50 Rated power: 8.8-15.8 kW depending on configuration Customer-side fuse: 3 x 25 A (slow blow) Max. simultaneous power consumption: 4.4 kW Dimensions: Machine width: 2400 mm Machine depth: 1600 mm Total height, guard down: 1600 mm Total height, guard up: 2200 mm Extraction port diameter (bottom extraction): Approx. weight: 1300 kg Incl. 2 x 6 m (2 x 4 m) roller conveyors Technical specifications subject to change! Kjdpfx Aaju Uh T Deyjdw

Kondisi: baru, Cutting range: Round 0°: 170 mm Square 0°: 150 x 150 mm Flat 0°: 150 x 190 mm Round 45°: 125 mm Square 45°: 95 x 120 mm Working height: 870 mm Cutting speeds: 40 / 80 m/min Saw blade: 2080 x 20 x 0.9 mm Coolant pump: 100 W Saw motor: 0.75 kW Connection: 400 V Dimensions (L x W x H), approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow pivotable up to 45° - Two band speeds for optimal adjustment to the workpiece - Ideal for cutting pipes, profile material and solid materials made of stainless steel, iron, etc. Kdodpfxeilk H Tj Aaysw - Generously sized saw arm for low-vibration operation - Saw arm lowering by hydraulic cylinder - Low noise due to robust construction - Automatic shut-off after cutting cycle via micro switch - Quick-release vice for easy and fast clamping of workpieces - Precise, adjustable blade guides for optimal cutting results - Coolant system with pump - Includes base frame - CE/IEC certified, German documentation and German service Scope of delivery: - Bi-metal saw band 2080 x 20 x 0.9 mm, 6/10 TPI - Band tension adjustable via pressure gauge - Quick-release vice - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic cut-off after cutting cycle - Base frame

Kondisi: bekas, Tahun pembuatan: 2010, Chalet construction machine Used, good condition, lightly used Manufacturer: Krüsi Kjdpfx Ajvwfqqoayedw Model: CMI 40 Year of manufacture: 2010 CE type-approved up to 140 mm round log corner joints Sawing: 1x Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition as inspected, sold as seen, without guarantee or warranty

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: kabin, for-sale-complete-log-sawing-line Kdodpsxdc H Esfx Aayow

Kondisi: bekas, Diameter rol: 800 mm Maks. tinggi potong: 440 mm Maks. lebar potong: 785 mm Tinggi meja: 970 mm Ukuran meja: 1170 x 800 mm Lebar mata pisau: 40 x 7/10 mm Panjang mata pisau: 5630 mm Diameter hisap: 120 mm Dimensi: 1625 x 940 x 2516 mm Berat: 770 kg Lokasi stok: Nattheim Kedswayzbjpfx Aaysdw

Kondisi: bekas, Presssystem: kontinuierlich / Kalander Hauptlieferanten: Bison / Berstorff Auslegungsleistung: 160 m³/Tag Erreichte Kapazität ca.: 200 m³/Tag Effektive Betriebszeit: 23 Std./Tag Referenzdicke: 3,2 mm Max. Bruttobrettbreite: 2500 mm Max. Netto-Brettlänge: 2440 mm Max. Netto-Brettbreite: unbegrenzt Min. Netto-Brettbreite: 1220 mm (durch Trennen) Min. Brettdicke: 2,0 mm Max. Brettdicke: 10 mm Kdjdpsul H Nmsfx Aayjw Elektrisches System: 380 V, 50 Hz Baujahr: 1985 Wesentliche Modernisierungen: 2007-2009, 2016 Betrieb bis: Mai 2018

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), Fully Automatic Finger Jointing Line: Model Double-Pack Machine is dismantled Machine will be inspected with functional guarantee Specification: Wood input length: min. 150 mm max. 1000 mm average approx. 400 mm Wood cross section: min. 20 x 40 mm max. 80 x 180 mm Wood output length: 6030 mm Max. wood cross section with 10 mm finger size: Hardwood: 120 cm² Softwood: 150 cm² Finger joint profile: vertical and horizontal Type of glue: PVAC white glue, double-sided glue application Electrics: Connection voltage: 400 V Control voltage: 24 V 50 Hz System prewired completely up to the control cabinet. Finger length / wood cross section and glue type can still be adjusted upon request. Capacity: 6 milling tables/min Working height: 960 mm Table width: 600 mm Glue application: double-sided application With endless bundling package Technical parameters: Kdsdpfoncd Utox Aaysw Input material: Input length (min. - max.): 150–1000 mm Part width (min. - max.): 40–155 mm Part thickness (min. - max.):20–80 mm Working height: 960 mm Bundle width: 600 mm Glue application: double-sided application (on both sides of the

Kondisi: baru, Table diameter: 330 mm Kedpfxeh D Svgo Aayedw Table load capacity: 350 kg Swivel range: 135 degrees Tilt adjustment: manual/motorized manual Max. rotation speed: 5 rpm, stepless Table load capacity (vertical): 120 kg Total power requirement: 0.125 kW Machine weight: approx. 52 kg Space requirement: approx. 640 x 490 x 630 mm Welding positioner with: - Foot switch - Manual tilt and swivel adjustment - Stepless speed adjustment - 250 Amp welding current transmission - 40 mm bore in faceplate.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en1 Kodpfsmhhypjx Aayodw