Gergaji menggorok

Centauro SLG 8000

Kondisi: bekas, Tahun pembuatan: 1984, Used machine Year of manufacture: 1984 Condition: fully checked and serviced Features and technical specifications: - Including combination unit with contact roller and sanding shoe - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device Ksdpfxjw R Hh Us Aafodl - With a rotating structuring brush on the machine's outfeed side - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Workpiece pass-through height: 150 mm - Main motor: 15 kW - Infinitely variable feed speed: 2.5 - 12.5 m/min - With roller table at infeed - With separate additional structuring brush - With roller table at outfeed - With digital display device for the electric motor-driven workpiece thickness adjustment - With automatic workpiece thickness adjustment - Extraction ports: 2 x 200 mm - Feed belt is functional; defective in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Photos show the machine in uninspected condition! Availability: short-term Location: Röllbach

Kondisi: baru, Tahun pembuatan: 2024, en Kdodpfx Aow Naanoafjl

Kondisi: hampir baru (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 1.100 h, Still a very nice longitudinal saw with only 1,100 operating hours, almost like new. Make: Irion Model: HFS 170 Year of manufacture: 1993 Maximum cutting length: 6,200 mm Maximum cutting width: 600 mm Maximum cutting height: 170 mm Equipped with digital width display Kedpfx Aev T Rc Djafodl Equipped with laser

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jam operasional: 3.551 h, lebar total: 1.790 mm, tinggi total: 2.150 mm, berat keseluruhan: 2.300 kg, panjang produk (maks.): 1.690 mm, This Kundig Premium-2 1350-RG wide belt sander was manufactured in 2018. It is equipped with a steel roller and a rubber roller, complemented by a belt discharge system. Accessories include two 3-meter roller conveyors, remaining sanding belts, V-belts, and various small parts. Take advantage of this opportunity to purchase the Kundig Premium-2 1350-RG wide belt sander. Contact us for further information regarding this machine. Additional Equipment • Steel roller • Rubber roller with a device for a pin roller (unused) • Belt discharge system Benefits of the Machine Technical Advantages of the Machine • Control system: Omron SYSMAC CP1H • Two roller conveyors, each 3 meters long • Sanding belts (remaining quantity not specified) • V-belts • Various small parts • Premium 2 1350 RP/RE and RE-L • Sanding belt motor RP/RE: 15 kW • Frequency-controlled feed motor RP/RE: 1.5 kW • Height adjustment motor RP/RE: 0.75 kW • Frequency-controlled vacuum motor RE-L: 2.2 kW • Total connected load RP/RE: 17 kW • Total connected load RE-L: 30 kW • Operating voltage RP/RE: 400 V • Maximum current draw RP/RE: 36 A • Maximum current draw RE-L: 56 A • Required minimum slow-blow fuse RP/RE: 40 A • Required minimum slow-blow fuse RE-L: 63 A • Cable cross-section reduced load RP/RE: 5x6 mm² • Cable cross-section reduced load RE-L: 5x10 mm² • Cable cross-section proper sizing RP/RE: 5x6 mm² • Cable cross-section proper sizing RE-L: 5x10 mm² • Extraction port diameter for 1st unit RP/RE: 180 mm • Extraction port diameter for 1st unit RE-L: 180 mm • Extraction port diameter for 2nd unit RE-L: 180 mm • Extraction port diameter for belt blow-off RE-L: 150 mm • Required total extraction port diameter RP/RE: 200 mm • Required total extraction port diameter RE-L: 300 mm • Air velocity at extraction openings RP/RE: 22 m/s • Total air volume for dust extraction RP/RE: 2000 m³/h • Total air volume for extraction RE-L: 5400 m³/h • Vacuum RP/RE: 880 Pa • Compressed air for belt tensioning and oscillation RP/RE: 2.5 Nm³/h • Compressed air for belt or workpiece blow-off per unit RE-L: 130 Nm³/h • Operating pressure RP/RE: 7 bar • Sanding belt length (all units) RP/RE: 2000 mm • Sanding belt width (all units) RP/RE: 1350 mm • Maximum workpiece width RP/RE: 1350 mm • Minimum workpiece thickness RP/RE: 4 mm • Maximum workpiece passage height RP/RE: 200 mm • Working height including machine base RP/RE: 910 mm • Feed speed range RP/RE: 3-15 m/min Kdjdpfx Aox D E I Eeafol • Overall machine length RP/RE: 1690 mm • Overall machine length RE-L: 1850 mm • Overall machine width RP/RE: 1790 mm • Machine height including base and extraction nozzle RP/RE: 1950 mm • Maximum machine height with base and extraction nozzle RP/RE: 2150 mm • Net weight approx. RP/RE: 2300 kg