Mesin EDM kawat / EDM

Charmilles ROBOFIL 240 CC

Kondisi: bekas, Tahun pembuatan: 2005, jarak pergerakan sumbu X: 1.020 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 600 mm, model controller: Heidenhain iTNC 530, tinggi total: 2.770 mm, panjang total: 3.300 mm, lebar total: 2.687 mm, Micron VCE 1000 Pro adalah pusat pemesinan CNC yang kuat dan presisi untuk kebutuhan milling yang menuntut. Dengan perjalanan sumbu 1020 x 560 x 600 mm, mesin ini menawarkan fleksibilitas dalam mengerjakan benda kerja berukuran sedang. Mesin ini dilengkapi kontrol Heidenhain iTNC 530, koneksi alat ISO-40, dan kecepatan spindle hingga 10.000 rpm, sangat cocok untuk proses pemesinan berkecepatan tinggi yang presisi. Nwodpfxoxyig Re Aaaof Meja kokoh berukuran 1000 x 560 mm dengan permukaan T-slot mampu menahan benda kerja hingga 1.350 kg. Dilengkapi conveyor chip, pompa pendingin, dan daya motor 18,5 kW, VCE 1000 Pro menawarkan kombinasi daya dan presisi yang andal.

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000 rpm, spindle power: 8.5 kW, tool holder: SK40, tool stations: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control system: Heidenhain TNC 426. An on-site inspection is possible. Njdsv Uqb Nspfx Aaaewf

Tahun pembuatan: 1993, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: RH 241-1-50-30v, 217ef9a0 Nwodopy Eygjpfx Aaaef

Kondisi: baik (bekas), Tahun pembuatan: 2012, Suku cadang yang ditunjukkan dengan tangan tidak termasuk. X1020mm Y610mm Z610mm. 12.000 rpm, 25 kW, 160 Nm. Unit kontrol: HEIDENHAIN iTNC 530. Sumbu keempat akan dikirim tanpa suku cadang yang ditunjukkan dengan tangan. Nedpjx Awzbefx Aaaswf

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivel range: ±10° Table longitudinal travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Nodsuxft Eepfx Aaaswf Max. workpiece weight (supported): 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Refurbished as per Kellenberger guidelines, including new, modern, and future-proof control system. Photo shows already delivered machine with 1000 mm centre distance. - Operation via touch panel is extremely user-friendly. - The symbols on the control panel are practically identical to those of the original controller, so no retraining is required. - Diagnostic function showing PLC messages and digital I/Os. - Dressing function can be expanded or modified as per customer requirements. - Workpiece spindle orientated stop available on request. - New max. infeed amount 40 mm, can be further increased on request. - 2-axis digital readout. x-axis resolution 0.5 µm. Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) - New, stable internal grinding attachment, diameter 80 mm or 100 mm - Increasing centre height to max. 225 mm - Variable speed control for grinding spindle Included: - Operator tools - Drawbar for chuck Further accessories on request. The machine features an electronically controlled infeed system on the x-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup for individual parts. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control Please note: This machine tool does not currently comply with the essential safety and protection requirements as specified in BetrSichV 2015. An increase in the required minimum safety objective must be determined via a risk assessment in accordance with BetrSichV.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 350 mm, jarak lintasan sumbu Y: 250 mm, jarak gerak sumbu Z: 250 mm, berat benda kerja (maks.): 200 kg, tinggi total: 2.372 mm, lebar total: 1.731 mm, panjang total: 1.000 mm, lebar meja: 630 mm, gores kuas bulu: 250 mm, panjang meja: 400 mm, panjang benda kerja (maks.): 800 mm, lebar benda kerja (maks.): 500 mm, tinggi benda kerja (maks.): 265 mm, GF AgieCharmilles FORM 20 Tahun pembuatan: 2017 Kontrol AC-FORM HMI Perjalanan sumbu: X=350 mm, Y=250 mm, Z=250 mm Ukuran benda kerja maks: X=800 mm, Y=500 mm, Z=265 mm Berat benda kerja maks: 200 kg Berat elektroda maks: 50 kg Jarak meja - chuck: 230 - 480 mm Generator ISPG – arus kerja 80 ampere Kualitas permukaan terbaik yang dapat dicapai Ra 0,1 µm Nodpfsxf Dvqsx Aaaowf Penggaris kaca linier dengan resolusi pengukuran 0,05 µm Termasuk chuck pneumatik Erowa ITS 50 Termasuk changer elektroda 4-posisi dalam majalah Berat mesin (netto): 2.000 kg Dimensi mesin (P x L x T): 1.000 x 1.731 x 2.372 mm Mesin akan dibersihkan, diservis, dan diuji setelah menerima pesanan. Kami juga dengan senang hati melakukan instalasi dan commissioning mesin untuk Anda.

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), Single-screw extruder WEBER NE5 1-30:D with 2 WEBER ZE30 co-extruders Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: Suitable for PE, PP, or three-layer pipe production, or for sheathing pipes with strip application Njdpfxjhy Tp Dj Aaaewf The line was used for manufacturing heating pipes Condition: Very good 2 units WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe line is my property Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn/Grabstede, Germany

Tahun pembuatan: 2024, Kondisi: baru, oris- Extruder MINI ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 min⁻¹ Screw axial pressure [bar]: 300 (continuous operation), 350 (maximum) Drive: Three-phase motor with frequency converter Drive output [kW]: max. 2.5 Reduction gearbox with integrated thrust bearing Weight [kg]: approx. 160 Dimensions [L x W x H] [mm]: approx. 1050 x 600 x 1590* Electrical connection values: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control: electric resistance heating bands with mica insulation Max. processing temperature [°C]: 300 Control cabinet and control panel Nsdpohx Elfefx Aaaswf The electrical installation of the extruder is housed in the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the buyer, and a chiller unit for water cooling is not included in the offer. Extruder tooling is not included in the offer.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, trans-001 Nwedpfx Ajxqn Ubsaaef

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SL154SY, panjang pembubutan: 750 mm, diameter putar di atas sled silang: 510 mm, diameter pembubutan: 680 mm, daya motor spindle: 7.500 W, kecepatan spindel (min.): 50 rpm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 56 mm, jarak pergerakan sumbu X: 215 mm, jarak lintasan sumbu Y: 70 mm, jarak gerak sumbu Z: 550 mm, diameter pemasangan: 20 mm, gerak cepat sumbu X: 18.000 m/menit, pergeseran cepat sumbu Y: 6.000 m/menit, pergerakan cepat sumbu Z: 24.000 m/menit, kecepatan rotasi (maks.): 3.000 rpm, kecepatan rotasi (min.): 20 rpm, jenis arus masuk: tiga fasa, panjang pemakanan sumbu X: 215 mm, panjang umpan sumbu Y: 70 mm, panjang umpan sumbu Z: 550 mm, torsi: 70 Nm, saluran batang: 56 mm, tinggi total: 2.015 mm, panjang total: 3.336 mm, lebar total: 1.873 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, MESIN BUBUT MORI SEIKI SL154SY DENGAN LNS BAR FEEDER Njdpsxddfvjfx Aaaewf LASER RENISHAW TERUJI KOTAK PERKAKAS. MESIN TELAH DICEK DAN SIAP DIGUNAKAN DALAM KONDISI OPTIMAL.