Robot pengelasan

CLOOS QIROX QRC 350-E

Kondisi: diremajakan ulang (bekas), Maximum pressing force: 180 kN (18 tons). Strokes per minute: 100 to 600. Maximum strip width: 60 mm. Maximum feed length: 60 mm. Maximum strip thickness: 2 mm. Adjustable stroke: 4 - 36 mm. In very good condition. Programmable speed and number of strokes. Three operating modes: manual, single stroke, and automatic. Pneumatic clutch and brake. Machine comes with a 6-month warranty. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx. 1.2 tons. Nedefmavxopfx Aglocl Power consumption: 2.2 kW. Required air pressure: 8 bar. More high-speed presses in stock by Bruderer (models BSTA 18, 20, 30, 200, 50), as well as Schaal and Mabu presses.

Kondisi: bekas, Pipe bending machine, mandrel bending machine, bending machine for tubes and profiles Pipe bending unit with SIEMENS servo motor and planetary gearbox Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - Last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending dies are interchangeable - Drive of the bending tool via AC servo motor and Alpha helical gear, planetary gearbox - 2-piece bending tool opens and closes by means of hydraulic lifting motion - MERKLE hydraulics - round block cylinder, type 014445, for hydraulic tool opening - Pneumatic height adjustment of the bending die via Festo pneumatic cylinder - Without electrical control unit - Without hydraulic power pack Dimensions (L/W/H): 760 x 400 x 150 mm Weight: approx. 60 kg Good condition Removed from a fully functional special-purpose machine, tested prior to removal. Drive: Brushless permanent magnet servo motor SIEMENS Type: 1FK6061-7AF71-1EG0 Rated torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 units in right-handed configuration available. 5 units in left-handed configuration available. The stated price refers to 1 bending unit with servo motor. Ncjdpfx Agjd E A I Ielol On request, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. Hydraulic power packs are also available.

Kondisi: bekas, Tahun pembuatan: 2016, jam operasional: 1.049 h,

Kondisi: baru, Airtower FT 20,000 model designation Ncodpfsgvqzcex Aglol

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 600 mm, tegangan masuk: 400 V, berat keseluruhan: 3.560 kg, tinggi benda kerja (maks.): 170 mm, The high-speed deburring machine for deburring, edge rounding, and finishing of steel parts up to 600 mm width. This deburring and finishing machine from Q-Fin is specifically designed for applying a large radius of up to 2 mm on steel sheets. With the Q-Fin SER600 Super Edge Rounder, it is possible to deburr, grind, edge-break, round, deslag, remove oxide layers, or create a line finish on sheet metal parts up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2025 model is equipped with a magnetic support, making it suitable for processing steel cut parts and other ferromagnetic materials. The machine features 5 processing stations and is conveniently operated via an HMI touchscreen on the machine's front. The first station of the SER600 consists of a grinding unit. The abrasive belt of this unit removes burrs and/or burn marks from the product surface. If no burrs are present, the abrasive belt can be omitted or removed. It is also possible to finish the product with a finer abrasive belt or with a Scotch-Brite belt. The second and third stations consist of a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations comprise 2 round brushes rotating in opposite directions (left/right). With the brushes, you can break sharp edges or—thanks to the unique combination of two brush systems—apply a radius of up to R=3 mm. By installing special brushes, the SER600 with magnet system is also highly effective for removing oxide layers from steel products or slag from plasma-cut parts. Ncsdpfxjl Dw D Eo Aglol We offer the combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set'. The WES6000 was developed by Q-Fin to safely extract grinding dust without pressure loss. This extraction system, made entirely of stainless steel, is a wet operating unit that removes grinding dust from stainless steel, steel, and aluminum, eliminating fire and explosion risks. According to Q-Fin, it is the safest, simplest, and most sustainable way to extract grinding dust. With the WES6000, there is no more grinding dust in the air and/or in the work environment. Currently, we have 2 units of the SER600 in stock: 1x new (year of manufacture 2025) 1x only a few months in use, like new (year of manufacture 2024) Both machines can be viewed by appointment in Bergeijk. Both machines have a 1-year warranty on the structure and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - Connected load for the SER600: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Kondisi: baru, Tahun pembuatan: 2024, tekanan: 8 batang, Mitre adjustment horizontal 15°-90°-15°, infinitely variable. Saw motor 5.50 kW (400 Volt). Saw blade 600 mm. Fence travel range at the rear 180 mm. Working height adjustable from 940 to 1000 mm via adjustable feet. 2 extraction ports (top of hood and bottom). Net weight 600 kg. Dimensions WxDxH 135x140x150 cm. RAL 9007 Grey Aluminium. Turntable made of ground nickel steel. Saw head with recirculating ball guides, designed for high precision, durability, and rigidity. Material can be pre-clamped with low pressure when the hood is open. Hydropneumatic blade feed. Chip flow directed toward extraction hood. Equipment: • Precision under-table circular saw • Mitre angle adjustment 0º/45º/90º/-45º/-60º, stepless • Includes 2 pneumatic clamps (vertical) Njdpegwt S Tsfx Agljcl • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Chip extraction system • Spray mist device for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure reducer included • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in delivery! Our NC pushing system ensures that your workpieces are positioned at the desired processing point on our UK 600 HA 90°. A gripper clamps the material, and the NC control automatically positions it. Afterwards, clamping and the sawing process are initiated. Positions are pre-programmed into the control system. Once the machine finishes the operation, it automatically moves to the next sawing position. Depending on the workpiece, several parts can be clamped and positioned simultaneously, either stacked or side by side. You are welcome to visit and inspect the desired system at our production or demonstration hall at any time. Please feel free to contact us. Plantec Maschinen GmbH

Tahun pembuatan: 2021, Kondisi: baru, - 4 rolls - Capacity 1570 x 9 Nedpfxsgg N R Hj Aglscl - Hardened rollers - Top roller diameter: 200 mm - Bottom roller diameter: 200 mm - Side roller diameter: 180 mm - Hydraulic system - Digital display for left roller movement - Digital display for central lower roller movement - Digital display for right roller movement - Top roller hydraulically foldable - Steel construction ST-52 - Hydraulic drop-end for easy roller positioning - Hydraulic up and down movement system with central and side rollers - Hydraulic balancing system - Overvoltage protection - Documentation - 400V

Kondisi: baru, Tahun pembuatan: 2024, EX DEMONSTRATION MACHINE ALZMETALL Pillar Drilling Machine ALZSTAR 40 SV with Coolant Device B (Option 25) (consisting of separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine light Standard features: Mushroom emergency stop button, reversing switch (for clockwise and counterclockwise rotation), motor protection switch Stepless speed adjustment, digital speed display, feed overload protection, protection class IP54, plug connector Spindle guard with electrical interlock Technical data: Drilling capacity in steel E335 (St 60): 40 mm Thread cutting: Steel E335 (St 60): M24 Cast iron EN-GJL-200 (GG20): M30 Ncoded Hy Elepfx Agljl Short spindle taper: MK 3 Spindle stroke: 120 mm Throat depth: 293 mm Column diameter: 115 mm Machine table, usable area: 514 x 360 mm T-slots, number x width x distance: 2 x 14 x 224 mm Distance spindle-table min./max.: 117 / 701 mm Feed: 0.10 + 0.20 mm/rev Machine height without options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Tahun pembuatan: 1972, Kondisi: bekas, nomor mesin/kendaraan: 51512/72, Pressing force: 75 t Throat depth: 300 mm Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram area: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Strokes per minute: 90 /min Drive motor: 380 V, 3 kW Space requirement: 1700 x 1200 x 2500 mm Weight: 3.3 t Ncodsb Tdquepfx Aglsl

Kondisi: baru, Capaciteit, Ø mm ----- 57 x 2 Radius, min/max ----- 20/250 Radiusverschil ----- 50/230 Buigsnelheid/herhaalbaarheid ----- 230º/s. ±0,05° Dorne-lengte ----- 1 000–∞ Gewicht ----- 5000 kg Machinedimensies ----- 3,0 x 1,6 x 1,5 m Buisrotatie ----- 0–360°/sec Lengte-invoer ----- 0–1800 mm/sec Tolerantiegraad ----- 0,05°/mm Standaardcomponenten volgens VDMA-, ISO- en DIN-normen OPTIES * Online verbinding met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasnaadherkenning en buispositionering, Nodpfega T E Asx Aglocl elektromagnetisch of optisch * Vrije radiusbuiging * Simulatie/Botsingscontrole * Verlenging van de bedlengte