Pabrik pengecatan lengkap

CM Macchine TIN-EVO 300/10 + RMS 40×800

Kondisi: diremajakan ulang (bekas), VERSCHIEDENE MOTORENTYPEN UND SCHLITTEN FÜR CELASCHI DET GEBRAUCHT, KOMPLETT GENERALÜBERHOLT Dededvlcyepfx Ahaouw

Kondisi: bekas, 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal treatment system / thermal chamber for wood modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler plant that uses thermal oil as a heat transfer medium. Technical Data: Capacity: 5,950 – 9,900 m³ of wood per year (at 330 operating days) Usable volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Electrical connection: 3 x 400 V, 50 Hz + Neutral + Earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating capacity: 2 MW (230°C – 250°C thermal oil) Heat consumption: 120 kWh/m³ of wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm Duplex stainless steel EN 4462 Hydraulically operated door with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Operating temperature: 0°C to 220°C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main Components: 1. Autoclave for the heat treatment process 2. Vacuum system for evacuating the autoclave before heat is applied 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (sea water resistant) Total area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Display: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature probes 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Duedpfjv Si Szjx Ahasw Sale on behalf of the customer, ex location near 5020 Salzburg (Austria), without dismantling, transport or assembly Dismantling, loading, and transport by us optionally available Subject to error in description and price To avoid misunderstandings, an on-site inspection is possible and recommended by appointment Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; sold as inspected Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to pickup or shipment Delivery terms: ex location

Tahun pembuatan: 2001, Kondisi: hampir baru (bekas), Dual-aggregate sander, two lower aggregates, each with 2 x 7.5 kW main power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished; the conveyor belt is in very good condition. Fitted with a new graphite pad. The machine features two bottom-mounted aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width: 630 mm. Two feed speeds: slow and fast. Sanding belt length: 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt feed speed: 9/20 m/min. Number of sanding pads: 1. CE conformity declaration. Rated total power: 21 kW. Max working height: 160 mm. The machine is equipped with two lower working rollers. Conveyor belt with upper feed system. Dodpsfxpbmjfx Ahaouw

Kondisi: bekas, Tahun pembuatan: 1997, Lini 3 mesin Stenner MHS9 dari tahun 1997 Djdpfxjw Nrhks Ahajuw

Kondisi: bekas, nomor mesin/kendaraan: 008116, de-001 Dodpsw Iddzsfx Ahaeuw

Kondisi: bekas, Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: AN2018080, panjang total: 12.860 mm, lebar total: 4.806 mm, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, panjang pemakanan sumbu X: 3.000 mm, lebar kerja: 350 mm, daya: 25 kW (33,99 hp), pply/reTRC 1500 – Houtreparatie- en Cosmetische Machine Technische Beschrijving • Systeemoverzicht • Procesworkflow Systeemoverzicht De Wintersteiger TRC 1500 is een volledig geautomatiseerd industriële installatie voor het detecteren en repareren van defecten in houten panelen. Deze machine combineert geavanceerde 3D-scantechnologie met hogedrukthermoplastinjectie en levert zo consistente, hoogwaardige reparaties aan productiesnelheid. Defecten worden gerepareerd met thermoplastisch vulmateriaal via een injectie- en aanbrengunit. Dankzij nauwkeurige berekening van het vulvolume en gerichte injectie wordt geen vulmateriaal verspild. Ook de randen kunnen worden gevuld. Belangrijkste Kenmerken • Geautomatiseerde 3D-lasertriangulatie voor defectdetectie • Hogedruk thermoplastinjectie voor duurzame reparaties • Precisie-afwerkingsunit voor cosmetisch perfect resultaat • Onafhankelijke smelttemperatuurzones met 8 kg tank • Gesloten glycol-water koelsysteem voor gecontroleerde uitharding • Ethernet-gestuurd regelsysteem met remote onderhoud • Onbeperkt aantal productprofielen en intuïtieve scannerinterface Productbereik (Werkstuk-specificaties) Lengte 500–3000 mm Breedte 100–350 mm Dikte 3–30 mm Productiesnelheid tot 10 m/min – afhankelijk van aantal en grootte van defecten Vulsysteem – Injectie- en Aanbrengunits • Injectie-unit: • 3-assige positionering (X/Y servogestuurd, Z pneumatisch) Duedpox Dmdhsfx Ahasw • Drukgereguleerde toevoer van het smeltmateriaal • Hogedrukinjectie • Aanbrengunit: • 3-assige besturing • Fijnafwerking van gerepareerde zones Defectenscanner • 3D-lasertriangulatie en hogesnelheidscamerasysteem • Detecteert defecten vanaf circa 1 mm diepte • Automatische hoogteverstelling • 2D + 3D meting • Instelbare parameters voor houtsoorten Smeltunit • 8 kg tank • Onafhankelijke temperatuurzones • Geïntegreerde zuigerpomp voor constante druk Koelunit • Gesloten glycol-water circuit • Stabiele temperatuurregeling Besturingssysteem • Ethernet-communicatie met remote onderhoud • Toegang tot PLC, scanner, servoaandrijvingen • Energie-efficiënte regeneratieve aandrijftechniek Scannersoftware • Verwerkt 3D-lichtsectieprofielen • Bepaalt defectvolume en positie • Onbeperkt aantal productprogramma's • Intuïtieve bedieningsinterface Hogedrukinjectieproces 1. Smelten van het thermoplastische materiaal 2. Druk- en temperatuurregeling 3. Gerichte injectie in het defect 4. Directe koeling 5. Minimale oppervlaktesporen • Voordelen: • Laag materiaalverbruik • Uitstekende hechting • Geen verandering van omliggende houtstructuur Systeemarchitectuur • Smeltunit • Verwarmde slangen • Injectiekop • Koelplaat • Koelunit met retourstroom

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, as-new condition (only 5,000 m² of parquet processed), compact oil application line comprising: Roller Application Unit: For application of oils, etc. Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm Membrane pump with max. capacity of 18 l/min Frequency inverter for variable speed of application roller Frequency inverter for variable speed of counter roller Transport belt speed variable: 3 to 14 m/min Stainless steel recovery trays Pad + Brush Unit: For spreading and removing excess oils Touch screen control Manual height adjustment Transport belt speed variable: 3 to 14 m/min Max. working width: 300 mm Max. workpiece height: 50 mm Pad diameter: 300 mm Quick-change system for pads Brush dimensions (L x D): 300 x 160 mm Quick-change system for brushes UV / LED Unit: Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm UV-LED output = 12 Watt/cm² Incl. ventilation fan Kevlar fabric transport belt Transport belt speed variable: 3 to 14 m/min Outfeed Conveyor Dusdpfx Ahjx Ah A Aeaew Length approx. 2,500 mm Max. working width: 300 mm Transport belt speed variable: 3 to 14 m/min Used Machinery Notice: • Technical details and intermediate sale subject to change. • Listed prices are ex-site, loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines on-site. • Special agreements are valid only if provided in written form. (We only respond to inquiries containing your address and telephone number!)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, Wir bieten diese gebrauchte IWT Moldrup-SPP Hydro-Thermal-Behandlungsanlage an. Industrielle MOLDRUP-SPP-Anlage zur hydro-thermischen Modifikation von Holz mit einem Durchmesser bis Ø 2.600 mm und einer Länge bis 12.000 mm. Die Anlage ist aus robustem Edelstahl gefertigt und für den kontinuierlichen industriellen Betrieb mit vollautomatischer SPS-Steuerung ausgelegt. Industrielle Hydro-Thermal-Holzmodifikationsanlage – Ø2.600 x 12.000 mm Industrielle hydro-thermische Behandlungsanlage, konstruiert für eine effiziente und gleichmäßige thermische Modifikation von Holz in einer kontrollierten, sauerstofffreien Umgebung. Die Anlage basiert auf einem schweren Edelstahlautoklaven mit den Maßen Ø2.600 mm × 12.000 mm, der pro Charge etwa 15–22 m³ Holz aufnehmen kann und für einen Betriebsdruck bis zu 12 bar (absolut) ausgelegt ist. Die vollautomatische SPS-Steuerung ermöglicht eine präzise Kontrolle von Vakuum, Druck, Temperatur und mehrstufigen Prozesszyklen. Das integrierte Vakuumsystem gewährleistet eine sichere Sauerstoffentfernung, während das Thermoöl-Heizsystem für eine exakte Temperaturführung während des gesamten Behandlungsprozesses sorgt. Die komplette Installation umfasst den Druckbehälter, das Heizsystem, die Vakuumpumpe, den Umluftventilator, die Kondensatbehandlung, das Beschickungssystem mit Fahrwagen sowie sämtliche Sicherheitseinrichtungen. Ein Thermoöl-Kesselaggregat sowie eine Emissionskontrolleinrichtung sind enthalten. Technische Dokumentation auf Anfrage verfügbar. Die gesamte hydro-thermische Holzbehandlungsanlage wird wie gesehen / wie sie steht und liegt verkauft. Dusdpfeymxqajx Ahasw Bei Fragen oder für weitere Informationen senden Sie uns gerne eine Nachricht oder rufen Sie uns an.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2021, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 000247, Gluestream PU-300 1C Single-Component Polyurethane Adhesive Application Machine Used machine, in near-new condition • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm wide, individually controlled by solenoid valve • Glue bead spacing: 10 mm • Tray with anti-adhesive liquid that automatically closes the combs when the machine is not dispensing • Glue application rate: 100 to 200 g/m², adjustable as required • Gear-type metering pump • Glue viscosity range: 10,000 to 30,000 mPas • Feed speed: 7 to 15 m/min • Support rack for 200 l drum • PLC control with touchscreen, KINCO brand • Machine by GLUESTREAM, Slovakia, manufactured in Ukraine • CE certified • Year of manufacture: 2021. Installed in May 2022. Like new, less than 200 hours of operation WE ALSO HAVE THE HYDRAULIC PRESS FOR GLULAM BEAM PRODUCTION Dusdpfxjt Nfars Ahaew

Kondisi: bekas, vierseitiger-hobel-klassische-spindel Dedpfx Ahsxxkt Aoaouw