Multi-gergaji

CML J350

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, ketinggian potong (maks.): 120 mm, lebar pemotongan (maks.): 350 mm, Multiblatt- und Besäumer-CML, Modell J 350 RT, CE-zertifiziert, 37 kW Hnedovlxbxjpfx Ag Roi

Kondisi: baru, Tahun pembuatan: 2025, CASADEI PFS 520 - Surface and thickness planer with 520 mm planing width and motorized thickness table adjustment Hedpfx Agobxz S He Roni Robust steel and grey cast iron construction Large, ribbed jointer tables made of grey cast iron, stress-relieved to prevent warping Smooth operation due to high self-weight Four feed speeds Motorized thickness table lift with two speeds and digital display Segmented pressure shoes at the infeed 4-knife cutter block with precision bearings Helically geared steel infeed roller for especially even and gentle wood feed Outfeed roller with rubber coating Large planing fence, tiltable 90°–45°, readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa cutter block: Cutter knives can be changed within seconds When the machine starts, the centrifugal force automatically tensions the knives – self-locking The knife projection adjusts itself automatically without any manual setting or screwing The jointer table is adjusted via a robust and precisely guided parallelogram system, ensuring the distance between the table lips and cutter block remains constant in every position The sturdy aluminum planing fence is anodized as standard, easy to move, and provides a large support area The adjustable tilt from 90° to 45° is easily visible from the workstation Standard with auxiliary fence for safe planing of narrow workpieces Image shows optional equipment The extraction port position remains the same for both surfacing and thickness planing modes Thus, no further extraction hose or cumbersome replugging and routing around the machine is necessary. Technical Data Total length of jointer tables: 2300 mm Infeed table length: 1180 mm Planing width: 520 mm Planing fence dimensions: 1200 x 190 mm Planing fence tilt range: 90–45° Min./max. planing height: 3/250 mm Cutter block diameter/number of knives: 100 mm / 4 pcs Feed speed: 5/8/12/18 m/min Cutter block speed: 5000 rpm Motor rating: 400 V / 50 Hz / S6 Extraction port diameter: 120 mm Weight: 1020 kg Top machine Location: Bitburg – immediately available

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, MESIN GERGAJI MULTI BILAH CML MOD. SCA J350RT – SESUAI STANDAR CE - 2 bilah bergerak - 37 kW Hnjdpfx Agox Run Ro Rji - Tahun 2015.

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, SCM Olimpic K 560 Automatická olepovačka hran, rok výroby 2018 na prodej! Výbava: - Rychlost řetězového posuvu: 12/18 m/min - Tloušťka hrany: 0,4/3 mm - Lepidlo: EVA - Frézovací jednotka na desky „RT-V“ - Jednotka nanášení lepidla „VC-S4.1“ - Ořezávací jednotka hrany „K-SEL“ - Frézovací jednotka hrany „R-K“ - Zaoblovací jednotka hran „ROUND X“ - Oškrabovací jednotka hran RAS-K - Leštící jednotka SP-V Technické parametry: - Rychlost posuvu (dvě rychlosti) m/min: 12 – 18 - Min. / max. tloušťka dílu: 8 – 60 mm - Tloušťka lepené dřevěné hrany: 0,4 – 6 (8 mm u HP složení) - Tloušťka lepené hrany z role: 0,4 – 3 mm - Maximální plocha lepené hrany z role: 135 mm² - Průměr cívky pro podporu „desky“: 780 mm - Maximální přesah lepené hrany vzhledem k dílu: 2+2 mm - Minimální vzdálenost mezi přepravovanými díly: 600 mm - Minimální délka dílu (při min. šířce dílu 100 mm): 140 mm - Minimální délka hrany z role: 180 mm - Minimální délka dřevěné hrany: 220 mm - Minimální šířka dílu (při min. délce dílu 210 mm): 95 mm (60 mm volitelně) - Šířka podpěry rozšíření: 560 mm - Výška pracovního stolu od podlahy: 900 mm Hodpfxjw Sw Tko Ag Reni Frézovací jednotka desky „RT-V“: - Max. plocha úběru třísek: 55 mm² - Max. tloušťka obrábění: 3 mm - Min./max. tloušťka dílu: 8 – 45 mm (60 mm volitelně) - Výkon motoru: 2 x 1,5 kW - Průměr frézy: 100 mm - Výška frézy: 49 mm (64 mm volitelně) - Otáčky nástroje: 9 000 ot./min

Kondisi: bekas, Tahun pembuatan: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood, featuring automatic identification and removal of wood defects. Technical data: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Hnodpfx Ajwtgcxeg Rei Order number: 0682-10 Supply voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Protection: 25 A Condition: used

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10006565, Weinig Powermat 1500 Working width: 30 - 310 mm (with tool flying circle 93-125 mm) Working height: 100 - 200 mm (with tool flying circle 93-125 mm) Hnodpfx Asrq Ebfjg Rei Number of spindles: 6 Bottom spindles: 2 Right spindles: 1 Left spindles: 1 Top spindles: 2 Spindle arrangement: bottom-right-left-top-top-bottom Maximum spindle speed: 8,000 rpm Spindle diameter: 40 mm Powerlock tool holder Including beveling unit Separate motor for each spindle Electronic feed including brake, steplessly adjustable 5-40 m/min Durofer pointed-tooth feed rollers Short infeed table, 1.2 m long, with 2 powered rollers above the table Machine table surface with hard coating Manual lubricant pump WEINIG Comfort Set Control system: WEINIG MEMORY PLUS-SYSTEM CE marking Declaration of conformity

Kondisi: baik (bekas), Tahun pembuatan: 1994, 2-sided planer, top and bottom Constant table height (always consistent feed height) Hsdpfxshuthys Ag Reni Max. planing width: 600 mm Max. planing height: 280 mm Cutterheads with strip knives Immediately ready for operation

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, jam operasional: 2.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1630, berat keseluruhan: 7.800 kg, masa garansi: 6 bulan, daya: 85 kW (115,57 hp), Complete production line for sale based on Di Più BRIK MB100 briquetting press (complete production line). General overhauled machine DI PIU BRIK MB100 (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. The unit was recently overhauled at the Di Piu factory, where all vital parts, cables, wiring, and necessary electrical components were replaced. As a result, the machine is as good as new and comes with a 6-month factory warranty from Di Piu. Hjdpswrp Emjfx Ag Rjni The machine can produce briquettes with or without a hole, 90mm to 110mm in diameter, from softwood or hardwood, round or square. Inspection is possible at the Di Più factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compressing wood, sawdust, and other waste materials into wood briquettes. Ideal input material moisture content: 8% – 12%, particle size: 1 mm – 12 mm. Technical data: -Production capacity: 1,300 – 2,300 kg/h (with sawdust density of 160–200 kg/m³) -Briquette diameter: 90 – 110 mm -Main motor power: 75 kW -Total installed power: 98 kW -Piston compression pressure: 2,000 – 2,500 kg/cm² -Vertical auger with gear unit: 5.5 kW -Oil pump: 1.5 kW -Oil pump for closing extrusion head: 1.5 kW -Feeder with auger and adjustable speed: 1.5 kW -Oil lubrication system for bronze bearings: 100 liters -Briquette output monitoring sensor (automatic shutdown if the material runs out) -Safety covers for moving parts -Oil pressure sensor -Control cabinet -Buffer hopper for input material (accumulator) -Level sensor for feed system monitoring -Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for full operation and integration into a briquetting line: ADDITIONAL EQUIPMENT – MB100: - Dosing silo: Heavy-duty steel construction. Diameter: 1,500 mm, height: 1,000 mm. Equipped with rotary cutter with 2.2 kW geared motor, mounted on robust steel frame. Material feeding controlled by level sensor. - Post-extrusion briquette cooling line, total length 20 meters - Automatic briquette saw - The saw automatically cuts the briquettes to lengths preset by the operator. - Device for producing briquettes with a hole - Head-cooling system with ice water - The system produces 50 liters/minute of ice water for efficient briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and large energy storage tank holding the immersed water-coolant heat exchanger. - The heat exchanger is a high-efficiency “fin-pack” type, made from copper pipes and aluminum fins. - Water tank capacity: 800 liters - Water supply pump (50 l/min – 20 mWc – 0.55 kW) with three-way DN25 valves for adjusting coolant temperature in the briquetting head. - Digital electronic temperature controller with NTC sensor (probe d.6 × 52 mm, IP68, AISI 316). ADDITIONAL: NOVAPAC Wrapper Option to purchase a NOVAPAC wrapper, fully compatible with Di Più BRIK MB100 and other machines, an ideal solution for automatic packaging immediately after compression. Year: 2013 Price for Novapac: €19,000 Equipment shown in the last 6 images.

Kondisi: bekas, Tahun pembuatan: 2017, Number of spindles: 5 pcs Working width: 240 mm Planing height: 120 mm Surfacing table length: 2,500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Weight: approx. 3,500 kg Control system: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully inspected. Short summary: ----- - 5 spindles - Powerful motors - Left and top spindles motorized for width and height adjustment - With workpiece return to the operator 1st Spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd Spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system 3rd Spindle ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic horizontal positioning / motorized width adjustment 4th Spindle ----- First top horizontal spindle Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Hnsdjwwl Nljpfx Ag Rei Electronic radial positioning / motorized height adjustment 5th Spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Including workpiece return Including available used cutterheads (Technical specifications according to manufacturer – no guarantee!)

Kondisi: baru, Tahun pembuatan: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle shaft (milling spindle) Non-interchangeable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with fixed, one-sided tilting spindle for tilt range from -5° to +45.5° Positioning control for height and tilt adjustment with height zeroing and offset travel Electronic position and speed indicators 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push buttons for spindle start and stop Forward and reverse rotation Quick-clamping system for cutter arbor Finely planed cast iron table with rigid frame support Control panel mounted below on rigid frame support Cutter fence 216 with total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum chip deflector lips Machine socket outlet Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Spindle shaft 30 mm, non-interchangeable Hnedpfefpb Nmsx Ag Rsi CE compliant GS tested