Oven udara panasCompactsystem
MARTINA 350
Oven udara panas
Compactsystem
MARTINA 350
harga tetap ditambah PPN
€16.000
tahun pembuatan
2025
Kondisi
Baru
Lokasi
Leipzig 

Gambar menunjukkan
Tampilkan peta
Data mesin
- Nama mesin:
- Oven udara panas
- pabrikan:
- Compactsystem
- Model:
- MARTINA 350
- tahun pembuatan:
- 2025
- Kondisi:
- baru
Harga & Lokasi
harga tetap ditambah PPN
€16.000
- Lokasi:
- Leipzig
Hubungi
Penjualan mesin

Apakah Anda sudah mengiklankan mesin bekas Anda?
Jual melalui Machineseeker tanpa komisi.
Lebih lanjut tentang penjualan mesin
Lebih lanjut tentang penjualan mesin
Rincian penawaran
- ID iklan:
- A18539956
- Nomor referensi:
- 1327-10326
- pembaruan:
- terakhir pada 31.03.2025
Deskripsi
Dimensions (L x W x H): 1700 x 2000 x 2550 mm
Weight: 1,400 kg
Fjdpsvz Hqyefx Adqsgh
Total power requirement: 4.5 kW
Hot Air Furnace MARTINA 350
The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industrial and craft enterprises. They have been developed for heating large areas, such as workshops and workspaces in craft and industrial businesses. These hot air systems require no long preheating phases and can quickly heat up the workshop, carpentry, joiner's shop, or other production facilities.
Solid wood and its by-products—e.g., solid wood board remnants, chips, sawdust, pellets, or briquettes—are used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 1996, and safety guideline 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st BImSchV mandatory emission limits.
- Automatic and continuous air operation
- Thermal output: 390 kW
- Thermal output (Kcal): 335,000
- Fuel consumption: 85 kg/h
- Air output: 20,000 m³/h
- Combustion chamber depth: 1,400 mm
- Feed door: 500 x 700 mm
- Hot air blower: 4.48 kW
- Combustion chamber negative pressure: 0.2–0.3 mbar
- Flue draft at nominal output: 0.18 mbar
- Heatable space: approx. 7,500 m³
- Heatable area: approx. 1,600 m²
- Space requirement: width 1,700 mm, depth 2,000 mm, height 2,550 mm
- Weight: 1,400 kg
- Flue pipe diameter (connector): 300 mm
- Recommended chimney diameter: 350 mm
- Efficiency: 85–90%
- Required chimney draft: 11.5 Pa
- Flue gas temperature: 289°C
- Hot air outlet connectors: 2 x Ø 450 mm
- For further technical data, please refer to the enclosed data sheet
The two pipe connectors for the outgoing hot air are located at the rear of the furnace, in the lower section. A maximum of 20 meters of ducting per pipe connector is allowed for air distribution. Longer runs are optionally possible after consulting the manufacturer. Please contact us for further details.
Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.
Weight: 1,400 kg
Fjdpsvz Hqyefx Adqsgh
Total power requirement: 4.5 kW
Hot Air Furnace MARTINA 350
The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industrial and craft enterprises. They have been developed for heating large areas, such as workshops and workspaces in craft and industrial businesses. These hot air systems require no long preheating phases and can quickly heat up the workshop, carpentry, joiner's shop, or other production facilities.
Solid wood and its by-products—e.g., solid wood board remnants, chips, sawdust, pellets, or briquettes—are used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 1996, and safety guideline 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st BImSchV mandatory emission limits.
- Automatic and continuous air operation
- Thermal output: 390 kW
- Thermal output (Kcal): 335,000
- Fuel consumption: 85 kg/h
- Air output: 20,000 m³/h
- Combustion chamber depth: 1,400 mm
- Feed door: 500 x 700 mm
- Hot air blower: 4.48 kW
- Combustion chamber negative pressure: 0.2–0.3 mbar
- Flue draft at nominal output: 0.18 mbar
- Heatable space: approx. 7,500 m³
- Heatable area: approx. 1,600 m²
- Space requirement: width 1,700 mm, depth 2,000 mm, height 2,550 mm
- Weight: 1,400 kg
- Flue pipe diameter (connector): 300 mm
- Recommended chimney diameter: 350 mm
- Efficiency: 85–90%
- Required chimney draft: 11.5 Pa
- Flue gas temperature: 289°C
- Hot air outlet connectors: 2 x Ø 450 mm
- For further technical data, please refer to the enclosed data sheet
The two pipe connectors for the outgoing hot air are located at the rear of the furnace, in the lower section. A maximum of 20 meters of ducting per pipe connector is allowed for air distribution. Longer runs are optionally possible after consulting the manufacturer. Please contact us for further details.
Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.
Penyedia
Catatan: Daftar gratis atau masuk, untuk mengakses semua informasi.
Terdaftar sejak: 2003
Kirim permintaan
Telepon & Faks
+49 341 9... iklan
Iklan Anda telah berhasil dihapus
Terjadi kesalahan