Beli Compactsystem Martina 350 bekas (6.506)

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total connected load: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. These units have been developed for heating large commercial spaces, such as workshops and production halls in craft and industrial operations. These hot air systems do not require long heat-up phases and can quickly warm up carpentry or joinery workshops, as well as other production facilities. Solid wood and its by-products, such as leftover solid wood panels, wood chips, sawdust, pellets, or briquettes, can be used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety requirements of Directive 89/392 CE. All hot air furnaces in the MARTINA series (15, 30, 55, 85, 120, 180, 240, 350) meet both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) emission requirements. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output in kcal: 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Loading door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2-0.3 mbar - Rated flue draft requirement: 0.18 mbar - Heated room volume: approx. 7,500 m³ - Heated floor area: approx. 1,600 m² - Required space: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (socket): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85-90% - Chimney pressure: 11.5 Pa - Exhaust gas temperature: 289°C - Hot air outlet nozzle: 2 x Ø 450 mm Todpfx Aajvz Hqyjijb - For further technical details, please refer to the attached data sheet The two pipe connectors for the outgoing hot air are located on the rear side of the furnace at the bottom. A maximum of 20 metres of duct per pipe connector is permitted for air distribution. Larger lengths are available in consultation with the manufacturer. Please contact us for this option.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0.5 kW Tsdpfx Aaovz Hqmjisb Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. They have been developed for heating larger functional spaces such as workshops and work areas in trade and industry facilities. These hot air systems require no lengthy warm-up times and can heat carpentry or joinery workshops, as well as other production facilities, in the shortest possible time. Fuel is solid wood and its by-products, e.g. offcuts from solid wood panels, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety regulation of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st BImSchV emission requirements. - Automatic and continuous air operation - Thermal output 29.8 kW - Thermal output in Kcal 25,700 - Fuel consumption 9 kg/h - Air output 2,400 m³/h - Combustion chamber depth 580 mm - Feed door 330 x 330 mm - Hot air fan 0.49 kW / 230 V - Negative pressure in combustion chamber 0.2–0.3 mbar - Flue draught at rated output 0.18 mbar - Heatable room volume approx. 600 m³ - Heatable area approx. 120 m² - Installation space: width 600 mm, depth 800 mm, height 1,900 mm - Weight 230 kg - Flue pipe diameter (spigot) 160 mm - Recommended chimney diameter 200 mm - Efficiency 85–90% - Chimney draft pressure 11 Pa - Flue gas temperature 286°C - Hot air outlet connections: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 hot air outlet pipe connections are located at the rear of the furnace in the lower section. For each outlet, a maximum of 20 meters of pipe is permissible for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal energy utilization solution for woodworking industrial and craft businesses. Todpfxsvz Hhxs Aaieb They have been designed for heating larger operational areas, such as workshop halls and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up periods and can heat the carpentry or joinery workshop, as well as other production facilities, in a very short time. Solid wood and its by-products serve as fuel material, e.g., remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree N°459 of July 24, 1996, and the safety guidelines of Directive 89/392/EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air delivery rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draft at rated output: 0.18 mbar - Heatable volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Required chimney draft: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet. The two pipe connectors for the outgoing hot air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per connector is permitted for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1300 x 1700 x 2550 mm Weight: 1200 kg Total Power Requirement: 2 kW Hot Air Furnace MARTINA 240 Tedpjvz Hqgofx Aaieb The MARTINA hot air furnaces are an ideal solution for energy recovery in woodworking industrial and craft businesses. They have been developed specifically for heating larger utility areas, such as workshops and workspaces in craft and industrial settings. These hot air systems do not require long heat-up phases and can warm up the workshop, carpentry, joinery, or other production facilities within a very short time. Suitable fuels include solid wood and its by-products, e.g., offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, and 350) comply with both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) regarding exhaust gas limits. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air flow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required installation space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connector): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 450 mm - For further technical data, please refer to the provided datasheet The 2 hot air outlet nozzles are located on the rear side of the furnace in the lower area. A maximum of 20 meters of ducting per outlet nozzle is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, en: Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating larger usable areas, such as production halls and workspaces in craft and industrial businesses. These warm air systems require no long preheating period and are able to heat up the workshop or joinery, as well as other production sites, within a very short amount of time. The fuel can consist of solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety guideline of Directive 89/392 CE. All warm air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by 1st BImSchV. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h Tedpfx Aasvz Hqteieb - Air delivery: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable space: approx. 300 m³ - Heatable area: approx. 60 m² - Required space: width 600 mm, depth 800 mm, height 1,900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90% - Chimney draft: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connection: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet The 2 pipe connections for outgoing warm air are located at the rear lower section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed for heating large utility areas such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up phases and can warm up the workshop, carpentry, or other production facility in a very short time. Suitable fuels include solid wood and its by-products, for example, remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output: 73,000 kcal - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm Todpfx Aaevz Hq Tsiob - Feed door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at nominal output: 0.18 mbar - Heatable volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Required space: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue outlet diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Flue gas temperature: 291°C - Hot air outlet nozzle: 2 x Ø 220 mm - For further data, please refer to the attached data sheet The two pipe nozzles for the outflowing hot air are located at the rear of the furnace in the lower section. A maximum of 20 metres of pipe per nozzle is permitted for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 Tjdpfx Aaovz Hq Hjisb The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger usable areas such as workshops and workspaces in artisanal and industrial operations. These hot air systems require no lengthy pre-heating phases and can heat up the joinery or carpentry workshop, as well as other production facilities, in a very short time. Suitable fuels include solid wood and its byproducts, e.g. solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE Italian Presidential Decree N°459 of 24 July 96 and safety standard 89/392 CE Annex. All hot air furnaces in the MARTINA range 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air operation - Thermal output: 49.9 kW - Thermal output (Kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow rate: 4,900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox underpressure: 0.2-0.3 mbar - Flue draught (rated output): 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Required space: Width 720 mm, Depth 1000 mm, Height 1900 mm - Weight: 300 kg - Flue pipe diameter (nozzle): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney draft: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 pipe nozzles for hot air discharge are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per air outlet is permitted for air distribution.

Kondisi: sangat baik (bekas), 6913 Todpfezu R H Ijx Aaisb

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, tinggi rak: 3.500 mm, Rangka Nedcon – sekitar 350 atau 400 x 110 cm | diperiksa & bekas Rangka Nedcon dengan ukuran sekitar 350 atau 400 x 110 cm berasal dari stok barang bekas yang telah diperiksa dan tersedia langsung dari gudang. Rangka ini ideal untuk memperluas rak palet Nedcon dan rak beban berat yang sudah ada. Berkat konstruksinya yang kokoh, rangka ini dapat digunakan secara andal dalam kegiatan penyimpanan sehari-hari. Kami juga dapat menawarkan balok penyangga yang sesuai sesuai permintaan. Data: Tinggi: 350 cm atau 400 cm Kedalaman: 110 cm Warna: Biru Sistem rak: Nedcon Tedpfx Ajzxgaljaijb Barang bekas, tersedia di gudang, siap dikirim -- TERSEDIA DALAM JUMLAH BANYAK – SIAP KIRIM -- Harga: Nego Anda akan menerima faktur dengan Pajak Pertambahan Nilai (PPN) yang tertera. BELUM MENEMUKAN YANG COCOK? Kunjungi situs web kami, di sini Anda akan mendapatkan gambaran umum yang cepat tentang banyak penawaran & variasi produk! Pengiriman: Pengiriman dapat dilakukan oleh perusahaan ekspedisi mitra kami sesuai permintaan, dan biayanya tergantung pada kode pos. Pemasangan: Staf terlatih kami akan dengan senang hati membantu Anda dalam pemasangan dan pembongkaran peralatan bisnis Anda jika diperlukan. Rekomendasi kami: Sampaikan kebutuhan Anda kepada kami... Kami akan dengan senang hati membantu Anda dalam mewujudkan proyek Anda, mulai dari perencanaan hingga pemesanan dan pemasangan. APAKAH ANDA BERMINAT ATAU PUNYA PERTANYAAN? Hubungi kami melalui pesan atau panggilan. Nomor telepon kami dapat ditemukan di halaman perusahaan kami. ☎️ Anda dapat menghubungi kami melalui telepon dari Senin hingga Jumat, pukul 08:00 - 15:00. Sebagai alternatif, Anda dapat mengirim pesan kepada kami dengan nama dan nomor Anda, dan kami akan segera menghubungi Anda.

Kondisi: baik (bekas), Included in delivery: 01x U-shaped collision protection corner, used Material color: orange Total height: approx. 350 mm Total width: approx. 200 mm Internal width: approx. 160 mm Total depth: approx. 360 mm Internal depth: approx. 240 mm Bracket dimensions: approx. 140 x 140 mm Base plate dimensions: approx. 340 x 200 x 8 mm Material thickness: approx. 6.00 mm Borehole diameter: approx. 16 mm Number of boreholes: 04 pcs Weight per unit: approx. 14.85 kg General information about the item: This item is offered for collection only. Any further required transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the place of delivery and scope of delivery. Tedpfxjk T Au Ee Aaijb

Kondisi: baik (bekas), The scope of delivery includes: 01x Rack Connector, used Mounting method: lateral attachment to rack upright Finish: sendzimir galvanized Total length: 450 mm Todpfx Aaji Euzdjiob For rack spacing: approx. 350 mm Profile dimensions: U 62 x 30 mm Weight: 0.84 kg | each

Kondisi: bekas, Steady a 3 punti Ø 350 mm per tornio SCULFORT Altezza del centro: 550 mm Diametro massimo: Ø 350 mm Distanza tra i fissaggi a V: 350 mm Larghezza: 1200 mm Spessore: 300 mm Altezza totale: 1300 mm Tedozwxhxspfx Aaisb Peso: circa 250 kg

Kondisi: sangat baik (bekas), Saya menawarkan untuk dijual osiloskop digital Tektronix DPO 4032 Digital Phosphor Oscilloscope. Perangkat ini berfungsi dengan baik, menyala tanpa masalah, dan beroperasi dengan benar. Menampilkan layar awal dan layar pengukuran, seperti yang ditunjukkan pada foto terlampir. Kondisi visualnya baik – memiliki tanda-tanda penggunaan normal akibat penggunaan. Spesifikasi teknis: • Produsen: Tektronix • Model: DPO 4032 • Jenis: Digital Phosphor Oscilloscope • Bandwidth: 350 MHz • Frekuensi pengambilan sampel: hingga 2,5 GS/s • 2 saluran analog • Layar LCD berwarna • Antarmuka: LAN, USB Host, USB Device, VGA, CompactFlash • Catu daya: 100–240 V AC, 50–60 Hz Kondisi: • Berfungsi penuh. • Perangkat menyala dan beroperasi dengan benar. Todpfxezru Hms Aaiob • Dijual tanpa probe pengukuran dan aksesori lainnya. • Set hanya mencakup osiloskop yang terlihat pada foto.

Kondisi: baik (bekas), Tunnel passage width: 540 mm Tjdpehinmfsfx Aaisb Tunnel passage height: 40 mm Quantity: 3 units Price per unit

Kondisi: bekas, Tahun pembuatan: 2017, Processing of light logs Tsdponqzkpsfx Aaijb - Length of cuts: from 1,300 to 4,500 mm - Log diameter: from 130 to 350 mm - Output: 100 m³ per shift - Total installed power: 230 kW.

Tahun pembuatan: 2017, Kondisi: bekas, weak wood material processing - cutting length from 1,300 to 4,500 mm - log diameter from 130 to 350 mm Todpfsnwm R Nox Aaiob - 100 m³ / shift production capacity - total power input 230 kW

Kondisi: baru, Dijual: kontrol daya profesional (SCR) Advanced Energy seri Thyro-A. Perangkat BARU – belum pernah digunakan (stok penyimpanan gudang). Peralatan industri kelas atas untuk instalasi produksi tingkat lanjut. 🔧 Spesifikasi Teknis: Produsen: Advanced Energy Model: Thyro-A 3A 400-350 HF RL3 Tegangan: 400 V Arus: 350 A Keluaran: Relay Out 4A / 250V Tipe: pengendali SCR (thyristor) ⚙️ Aplikasi: - tungku industri - sistem pemanas - otomasi industri - pengaturan daya pada lini produksi 📦 Paket terdiri dari: Todpfx Aaoyw T Ipoieb - 3x modul Thyro-A - housing/radiator industri - kipas pendingin - paket lengkap sesuai foto ✅ Kondisi: BARU – belum pernah digunakan Kemungkinan ada sedikit tanda penyimpanan. Fungsi 100% normal.

Kondisi: sangat baik (bekas), pl-hu-001 Tedpfsyxr Dxox Aaieb

Kondisi: sangat baik (bekas), Bosch U-HD 350 kg/h. Year of manufacture: 2015. Weishaupt burner, suitable for gas or oil. Tjdpfx Aasm Rhdyjisb

Tahun pembuatan: 2000, Kondisi: bekas, Punching machine Edel HM 35/350 BKE 200/5 Maximum pressure: 35 t Sheet thickness: 5 mm at 40 kp/mm² Todpfxog Dgyxj Aaisb

Kondisi: bekas, Technical data: Track width: 350 mm Maximum cutting height: 200 mm Maximum saw blade diameter: 300 mm Infinitely variable feed adjustment Automatic lubrication system Anti-kickback protection Extraction port: 2x220 mm Emergency stop switch Todpfxjichkco Aaieb Upper shaft motor power: 55 kW Lower shaft motor power: 55 kW Power supply: 380 V Motor speed: 2800 rpm Manufacturer: A.Costa Overall dimensions: Length: 2700 mm Width: 2220 mm Height: 1650 mm

Kondisi: baru, TECHNICAL DATA: - Base area: 10,000 x 24,000 mm [other configurations available] - Grid spacing: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm chipboard, P6 raw/white - Load capacity: 350 kg/m² - Colour: RAL of your choice - Condition: new The platforms are standardly expandable according to the specified grid. Other dimensions and heights available upon request. Our team will be happy to advise you! Tedpfx Aaexpizajijb Scope of supply: - Columns - Main and secondary beams - Cross braces - Floor covering - Fastening material Sample prices: 30 m² | Area: 5,000 x 6,000 mm | €2,685.00 net, plus shipping and VAT 60 m² | Area: 5,000 x 12,000 mm | €4,785.00 net, plus shipping and VAT 90 m² | Area: 5,000 x 18,000 mm | €6,855.00 net, plus shipping and VAT 120 m² | Area: 5,000 x 24,000 mm | €8,955.00 net, plus shipping and VAT 60 m² | Area: 10,000 x 6,000 mm | €4,785.00 net, plus shipping and VAT 120 m² | Area: 10,000 x 12,000 mm | €8,645.00 net, plus shipping and VAT 180 m² | Area: 10,000 x 18,000 mm | €12,495.00 net, plus shipping and VAT 240 m² | Area: 10,000 x 24,000 mm | €16,335.00 net, plus shipping and VAT Further configurations available. Please contact us for more information. Optional accessories: - Guardrails - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal braces instead of cross braces available at extra charge YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURING This platform system is an example from our standard range. Of course, we develop and manufacture your custom storage platform according to your specific requirements – tailored to area, load capacity, installation height, and intended field of application. Based on your specifications, our planning department will provide you with an individual, non-binding offer. Whether new construction, extension, or modernisation of existing systems – we support you with solid technical expertise and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation. This item is available for collection. Delivery or shipping is available at an additional cost. Shipping costs are based on the delivery location and consignment volume and can be quoted individually upon request. TERMS OF PAYMENT Payment terms will be agreed upon when placing an order. Prices are per unit/net prices or as specified in the description (plus VAT). Naturally, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage solutions, as well as machines for trade, industry, and the crafts sector. We constantly offer interesting used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please feel free to contact us. ✅ Four-in-a-row – The four success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Kondisi: baru, TECHNICAL SPECIFICATIONS: - Footprint: 15,000 x 20,000 mm [other variants available] - Grid spacing: 5,000 x 5,000 mm - Top of floor covering: 3,340 mm - Clear height: 3,000 mm [adjustable] - Floor covering: 38 mm particle board P6 raw/white - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The platforms are modularly expandable according to the specified grid. Other sizes and heights available upon request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Cross braces Tjdexpic Rspfx Aaieb - Floor covering - Fastening material PRICES: 25 m² | Area: 5,000 x 5,000 mm | €2,345.00 net, plus shipping costs and VAT 50 m² | Area: 5,000 x 10,000 mm | €4,135.00 net, plus shipping costs and VAT 75 m² | Area: 5,000 x 15,000 mm | €5,835.00 net, plus shipping costs and VAT 100 m² | Area: 5,000 x 20,000 mm | €7,645.00 net, plus shipping costs and VAT 100 m² | Area: 10,000 x 10,000 mm | €7,555.00 net, plus shipping costs and VAT 150 m² | Area: 10,000 x 15,000 mm | €10,985.00 net, plus shipping costs and VAT 200 m² | Area: 10,000 x 20,000 mm | €14,175.00 net, plus shipping costs and VAT 300 m² | Area: 15,000 x 15,000 mm | €20,515.00 net, plus shipping costs and VAT 400 m² | Area: 20,000 x 20,000 mm | €26,675.00 net, plus shipping costs and VAT 500 m² | Area: 20,000 x 25,000 mm | €30,035.00 net, plus shipping costs and VAT Further variants available. Optional accessories: - Guardrail - Flush wall connection - Staircase - Goods transfer station - Impact protection - Diagonal braces instead of cross braces (at extra cost) YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist with transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible at extra cost. The additional costs depend on the delivery location and the scope of the shipment – we will provide individual quotations upon request. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is understood as unit price/net price or as indicated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK in Nordhorn specializes in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for commercial, industrial and craft applications. We continuously offer interesting used stock from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us. Four-in-one – The DLK success modules: Warehouse Technology | Levelmaker® | Logistics | Solutions

Kondisi: baru, daya: 75 kW (101,97 hp), Tahun pembuatan: 2025, de Tedpfeq I N Atox Aaisb

Kondisi: bekas, jarak tempuh: 26.958 km, daya: 96 kW (130,52 hp), pendaftaran pertama: 05/2025, jenis bahan bakar: diesel, berat keseluruhan: 3.500 kg, warna: abu-abu, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, jumlah tempat duduk: 6, panjang total: 5.981 mm, lebar total: 2.059 mm, tinggi total: 2.536 mm, panjang ruang muatan: 2.488 mm, Tahun pembuatan: 2025, Perlengkapan: ABS, filter jelaga, kunci sentral, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP),