Tekan tangan

CORMAK AP3

Kondisi: siap digunakan (bekas), Pressing force: 1600 kN, throat depth: 450 mm, installation height: 560 mm, ram stroke: 8–160 mm, control system: SCHMERSAL SEPG 05.3.2.0.22/95, weight: 16.2 t, including documentation. Hedpfehz Ua Ssx Ahnsfh

Kondisi: baru, Tahun pembuatan: 2025, Laser power: 6000 watts Round tube: 20 - 350 mm Hfedpfx Ahexgc Arsnoh Square tube: 20 x 20 - 350 x 350 mm Rectangular tube: 20 x 20 - 350 x 350 mm Max. positioning accuracy X, Y axis: 0.05/1000 mm Max. positioning accuracy U axis: 0.05/1000 mm Max. mild steel thickness: 14 mm Max. stainless steel thickness: 10 mm Max. aluminium thickness: 10 mm Max. pipe weight: 1200 kg Length: 17,296 mm Width: 4,271 mm Height: 2,933 mm Standard Equipment Working area for tube diameter: - Round tube: 20 mm - 350 mm - Square tube: 20 - 350 mm - Rectangular tube: 20 x 20 mm - 350 x 350 mm Minimum clamping tube thickness: ≥1 mm Y-axis travel: 9,100 mm Z-axis travel: 4,000 mm X-axis travel: 400 mm Maximum loading length: 9,200 mm Maximum unloading length: 6,000 mm X, Y axis positioning accuracy: +/-0.05 mm/1000 mm X, Y axis repeatability: +/-0.05 mm/1000 mm Maximum positioning speed of rotary U axis: 100 RPM Maximum acceleration X/Y axis: 1.0 G Idle speed X-axis: ≤50 m/min Maximum loading capacity per tube: ≤133 kg/m Operating temperature of the machine tool: 20°C-40°C

Kondisi: baru, Tahun pembuatan: 2024, Pressing force: 20 t Outreach: 155 mm Hedpfovfhp Sox Ahnofh Stroke: 6-60 mm Stroke rate: 84-210 strokes/min Ram adjustment: 50 mm Installation height, top, ram adjustment at top: 300 mm Table surface: 300x450 mm Table height: 840 mm Pass-through opening in table: Ø 90 mm Ram area: 190x278 mm Pin hole in ram: Ø 25 mm Total connected load: 1.5 kW Machine weight approx.: 1.0 t Required space approx. (WxDxH): 1100x1100x1900 mm Machine number: 16146 LED machine lamp Frequency-controlled stroke rate Sick light curtain for safety and cycle operation 4x freely programmable electronic cams 4x freely programmable tool safeguarding modules Machine feet Two-hand operation Foot operation Central lubrication Pneumatic clutch-brake combination Approved for manual loading operations

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1970, nomor mesin/kendaraan: 5058870, Pressing force: 25 t Throat depth: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Ram adjustment: 70 mm Stroke adjustment: 4 - 80 mm Stroke rate: 150 /min Drive motor: 380 V, 1.1 kW Space requirement: 1600 x 850 x 2000 mm Hfedsm Uxzujpfx Ahnjh Weight: approx. 1450 kg

Kondisi: baik (bekas), Tahun pembuatan: 1974, Hand spindle press, mandrel press, spindle press, manual spindle press, pressure press, balance pressure press - Manufacturer: Kalisz, manual spindle press type YB-1 with solid base frame - Pressing force: max. 10,000 kg - Stroke: 200 mm - Clear width: 320 mm Hodpfoigwdwox Ahnjfh - Spindle bore: Ø 20 mm - Table size: 290 x 250 mm, slot width 14 mm - Dimensions: 1160/860/H1750 mm - Total weight: 350 kg

Tahun pembuatan: 2012, Kondisi: siap digunakan (bekas), A Sahinler workshop press is available. Pressing force: 150 t, max. pressure: 244 bar, working width: 1520 mm, piston stroke: 300 mm, ram dimensions X/Y: 200 mm / 1520 mm, pass-through hole: 100 mm, table dimensions X/Y: 600 mm / 1520 mm, max. installation height: 610 mm. Forward speed: 9 mm/s, retraction speed: 10 mm/s, working speed: 5 mm/s, drive power: 11 kW. Machine dimensions X/Y/Z: approx. 2500 mm / 1000 mm / 2400 mm, weight: approx. 3000 kg. Documentation available. Inspection on site is possible. Hsdpfxsv N I Ago Ahnjfh

Kondisi: baik (bekas), Pressing force: approx. 10 t Table size: 500 x 300 mm (W x D) Ram size: 110 x 105 mm (W x D) Installation height: approx. 150 mm (max. stroke, up) Stroke: 5...29 mm Ram adjustment: 25 mm Other features: • Rotary wedge clutch • Foot release • Control system and safety guard as new, very little used Hfjdpfx Asvnrhwshneh • Without table

Tahun pembuatan: 2021, Kondisi: bekas, Technical details: Pressure: 5 t Column clearance: - mm Installation height: 60 mm Rated power: 8 kVA Table height adjustment: 60 mm Compressed air: 6 bar Connection voltage: 400 V Electrical configuration - Voltage/Frequency: 400/50 V/Hz Total power: 4 kW Approx. machine weight: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! DESCRIPTION OF THE MACHINE 2 machines available MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. A movable press table is located on the horizontal arm and can be manually positioned on linear guides. Hsdpfx Aoyzzh Eehnefh In the forward position, the table can be locked manually using a spring-loaded pin. In the working position (under the press head), the table is locked automatically by a pneumatic cylinder. The press head may only be lowered in this position using two-hand control. The control panel is equipped with two-hand switches, emergency stop switch, table lowering button, and force selectors 1, 2. Force can be adjusted via potentiometers in the control cabinet. Two force levels and the corresponding press speed can be set there. The press head travels along the vertical arm of the press. It also moves on linear guides. The head is driven by a leadscrew, which is powered by an electric motor with gearbox via pulleys and a toothed belt. The entire machine is mounted on a table made of aluminum profiles.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2012, nomor mesin/kendaraan: AA1/016854, Fungsionalitas: berfungsi sepenuhnya, 3-AXIS DRILLING & MILLING CENTER Brand: SCM Model: TECH Z2 Ref. R0410.01 Serial No.: AA1/016854 Year: 2012 (Photos taken prior to overhaul, functional tests & cleaning) MACHINING CAPACITIES: - Max workpiece height (thickness): 160 mm - Max workpiece length: 2700 mm In pendulum mode: 1210 mm - Max workpiece width: 1300 mm Axes Movements: - X-axis stroke: 3060 mm, Y-axis: 1735 mm, Z-axis: 250 mm - Max traverse speed (vector): 60 m/min MACHINE COMPOSITION: - 6 beams with pneumatic clamping for suction pods, e.g. 120x120 or 55x120 mm - Automatic lubrication unit - Aggregate units on swan-neck, composed as follows: (Axis X moves by rack and pinion, axis Y by ball screw and linear bushings; high precision linear guides with automatic lubrication) • Milling/routing spindle unit 11 kW (15 HP): - Rotation speed: 1,500 – 24,000 rpm, variable, CW/CCW - Tool holder interface: HSK63F, collet ER32 - On-board magazine for 8 tools - Perimeter dust extraction hood • 18-spindle drilling unit: - 12 independent vertical spindles (8 in X, 5 in Y) - 6 horizontal spindles (4 in X, 2 in Y) - Spindle spacing: 32 mm for bits M10 / Ø11 mm - Rotation speed: 4,000 rpm - Pneumatic vertical stroke: 60 mm - Perimeter dust extraction hood • Integrated scoring saw-milling unit: - Blade Ø120 mm, thickness 6 mm - Speed 6,000 rpm - Pneumatic vertical stroke: 60 mm • Mobile operator console on boom with PC: – Operating system: Windows XP – 17" LCD display – Ethernet connection – Machine interface software: Xilog and Maestro OTHER FEATURES: - Total power supply: 400V, 3-phase+N+PE, 50Hz, IN37A - Electrospindle motor: 12 kW - Drilling/grooving motor: 2.2 kW - 1 vacuum pump 2.4 kW: 90-108 m3/h - Pneumatic supply: >=7 Bar - Dust extraction: Hsdsv Tzrvopfx Ahnefh Extraction outlets: 2x Ø150 mm (1 outlet Ø200 mm via fitted adaptor) Recommendation: 30 m/s – 3400 m3/h - CE compliant, safety area with photoelectric barrier Dimensions in operation with safety area: see documentation extracts Transport dimensions: specified upon material preparation Estimated total weight: 2,200 kg Supplied with instruction manual and software, spare parts list, electrical and pneumatic diagrams. Please consult us for supply of consumables, accessories and/or extraction systems. Machine overhauled, CE compliance upgraded, with quality control and dynamic functional testing. Includes 3-month warranty & CE conformity certificate. In stock, subject to prior sale. Ex-works price. Delivery and additional services on request.

Kondisi: sangat baik (bekas), Mesin frais horizontal Diameter spindel: 40 mm Hodpfxsw N Ryro Ahnjfh Panjang spindel: 220 mm Diameter spindel maksimum: 250 mm