Beli Sinumerik 820 bekas (1.640)

Kondisi: baru, R. & S. Keller Sinumerik 820 T operator panel, unused, 100% functional Cgodpfx Asi Ecl Isg Dst

Kondisi: siap digunakan (bekas), Complete 12" monitor unit for Siemens control 820, used, normal signs of wear, 100% functional, scope of delivery as per photos Cgodpoi Ebwdsfx Ag Djt

Kondisi: baru, R. & S. Keller Sinumerik 820 T control panel, unused, in opened original packaging, 100% fully functional Cgsdpfei Ecl Sox Ag Det

Kondisi: baru, Siemens SINUMERIK 840D/DE NCU 572.2 6FC5357-0BB21-0AE0 SN: ST-M82029648, direkondisi ulang sepenuhnya dan diuji secara profesional dengan garansi 24 bulan, 100% berfungsi, cakupan pengiriman sesuai foto Cgedpfx Agjxahtvs Djt

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2010, Fungsionalitas: tidak berfungsi, kecepatan pemakanan sumbu X: 120 m/menit, frekuensi input: 50 Hz, For sale is a mechanization set by Weinig, consisting of: Weinig 811, Weinig 820, Cgedsv Skayspfx Ag Dst Weinig 814, Weinig 811, Weinig 806

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, gaya penjepit: 4.000 kN, berat keseluruhan: 22.500 kg, Hydraulic injection molding machine from 2005. This Arburg SELECTA 820 S 4000 - 3200 features a clamping force of 4000 kN and an opening stroke of 700 mm. The machine offers a platen size of 1171 x 1171 mm and a maximum moving platen weight of 4500 kg. If you are looking for a high-quality injection molding machine, consider the Arburg SELECTA 820 S 4000 - 3200 that we have for sale. Please contact us for further details. • Available quantity: 4 • Clamping unit: • Opening force: 100 kN • Opening stroke: 700 mm • Minimum mold height: 350 mm • Maximum daylight: 1550 mm • Tie bar spacing: 820 x 820 mm • Platen size: 1171 x 1171 mm • Max. moving platen weight: 4500 kg • Ejector force: 100 kN • Ejector stroke: 250 mm • Injection unit: • Screw diameter: 70 / 80 / 90 mm • Screw L/D ratio: 23 / 20 / 18 • Max. screw stroke: 320 mm • Shot volume: 1323 / 1608 / 2036 cm³ • Max. shot weight (PS): 1215 / 1469 / 1860 g • Injection pressure: 2500 / 2000 / 1530 bar • Injection rate: 304 / 396 / 502 cm³/s • Screw speed: 350 rpm • Peripheral screw speed: 65 / 75 / 80 m/min Csdoy A Ny Eepfx Ag Degt • Screw torque: 2247 Nm • Nozzle contact force: 110 kN • Nozzle stroke: 600 mm • Drive and power: • Hydraulic pump motor: 55 kW • Installed total power: 96.2 kW • Heating: • Cylinder heating power: 6 zones (5500 + 4300 W) • Nozzle heating: 1250 W • Oil tank capacity: 590 l

Kondisi: bekas, de_001 Codpfsy Hp Auex Ag Dogt

Kondisi: bekas, stabiler-2-bock-rollcontainer-mit-kunststoff-rollboden-der-mit-g latten-nylonradern-ausgestattet-ist Cgedpfxey Hp E Ao Ag Dot

Kondisi: bekas, translation_001 Cjdpfjy Hp Azex Ag Dsgt

Kondisi: bekas, de-01 Codpfx Agey Hpz Re Dogt

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 380 mm, panjang pembubutan: 3.000 mm, diameter pembubutan: 630 mm, lubang spindel: 90 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 2 rpm, jarak pergerakan sumbu X: 355 mm, jarak gerak sumbu Z: 3.000 mm, daya motor spindle: 10 W, gerak cepat sumbu X: 8.000 m/menit, pergerakan cepat sumbu Z: 5.000 m/menit, lebar total: 1.850 mm, jarak gerak quill: 180 mm, diameter quill: 100 mm, gores kuas bulu: 180 mm, berat benda kerja (maks.): 3.000 kg, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, POREBA CNC TRP 63 Tahun pembuatan: 2002 Kondisi: bekas Mesin dalam keadaan terhubung listrik, dapat dilihat Data teknis: • Tipe: TRP 63 MN • Kontrol: SIEMENS SINUMERIK 810D • Nomor seri: 7402-09-03006-03 • Ketinggian center: 325 mm • Jarak antar center: 3000 mm • Lubang spindle: Ø 90 mm • Penggerak utama: 10 kW • Tegangan jaringan: 3 × 380 V / 50 Hz Perlengkapan: • Revolver alat MULTIFIX C (tanpa holder) • Tailstock dengan feed pinol manual • 2 handwheel elektronik Cjdpfjyhp Ekox Ag Degt • Konveyor serpihan • Sistem pendingin (pompa di konveyor serpihan) • Pelindung bagian belakang

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, gaya penjepit: 4.000 kN, diameter sekrup: 70 mm, lebar total: 2.300 mm, berat keseluruhan: 22.700 kg, panjang produk (maks.): 8.000 mm, This 3-axis hydraulic injection moulding machine Arburg 820 S 4000-2100 was manufactured in 2016. It features a clamping force of 4000 kN, a platen size of 1171 x 1171 mm, and a maximum mould installation height of 850 mm. With a screw diameter of 70 mm and an injection unit of 2100, this machine is ideally equipped for high-quality injection moulding operations. Take advantage of this opportunity to purchase the hydraulic injection moulding machine Arburg 820 S 4000-2100. Please contact us for further details. • Control system: SELOGICA direct • Tie bar spacing: 820 x 820 mm • Platen size: 1171 x 1171 mm • Max. mould installation height: 850 mm • Max. opening stroke: 700 mm • Max. daylight: 1550 mm • Ejector force: 100 kN • Ejector stroke: 250 mm • Max. weight of moving mould half: 4,500 kg • Injection unit: 2100 • Heating zones: 6 + nozzle • Drive capacity (hydraulic pump): approx. 55 kW • Installed total power: 88.9-96.2 kW • Total connected load: 124 kW • Operating voltage: 400 V 3~ 50 Hz • Machine cycles: 4,157,591 • Pump hours: 69,800 h • Automatic operating hours: 58,556 h • Machine options: 2x core pulls, AES energy-saving system Additional equipment • ARBURG Multilift Select 15 kg robot (2016, transverse) • Payload: 15 kg • Y-axis stroke extension: 1400 mm • C-axis: pneumatic 0/90°, 28 Nm torque • Vacuum equipment: 2 circuits (each 23 l/min) • Gripper interface: 8 inputs / 4 outputs (programmable) • Valve equipment: 5/3-way valve • Safety: monitored, adjustable working area Cjdpfx Aeyzrddsg Degt • Conveyor belt: 800 x 2500 mm • Blower unit

Kondisi: siap digunakan (bekas), Mesin penghancur drum Bruks 820CL, konveyor getar Bruks M-450 cutter dengan diameter rotor 800 mm bukaan makan 560 x 365 mm 2 pisau panjang serpihan 23 - 27 mm Csdjxn T Tdopfx Ag Dogt produktivitas sekitar 30 - 50 m3 serpihan/jam daya 55 kW panjang 30 m berat sekitar 4.500 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2022, aerotec-820-90-pro Codpfey A Hbyjx Ag Dsgt

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin VK820 dua-rotor dilengkapi dengan rotor berdiameter 620 mm dan sudah termasuk konveyor pengumpan VK600 serta unit tenaga hidrolik. Mesin pengupas kayu ini telah sepenuhnya direkondisi di bengkel kami dan dalam kondisi kerja yang sangat baik. Codpfx Agsx Dip Hs Djgt Sebagai alternatif, sesuai kebutuhan pelanggan, rotor dapat diganti dengan rotor berdiameter 480 mm.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, jam operasional: 395 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 980-416, lebar total: 2.098 mm, tinggi total: 1.405 mm, panjang total: 2.316 mm, diameter briket: 80 mm, berat keseluruhan: 1.800 kg, jenis arus masuk: tiga fasa, arus masuk: 28 A, frekuensi input: 50 Hz, tegangan masuk: 400 V, kapasitas tangki oli: 250 l, Perlengkapan: henti darurat, unit pendingin, WEIMA TH 814 briquetting press! Excellent condition! Like new! Immediately available! Private sale (no VAT reclaimable)! Operating hours: only approx. 400 hours The WEIMA TH 814 is a robust hydraulic briquetting press for industrial applications. It processes wood and biomass waste into highly compressed cylindrical briquettes with a diameter of 80 mm. The machine is designed for reliable continuous operation, offering high energy efficiency and a compact design for easy integration into existing systems. Model: WEIMA TH 814 Briquette diameter: 80 mm Application: wood, biomass, paper, plastic residues Year of manufacture: 2020 Throughput: up to approx. 180 kg/h Hydraulic motor: 11 kW Hydraulic system: automatic operation, suitable for continuous use Weight: approx. 1,800 kg Cgodpjy Af T Iofx Ag Dst Dimensions (L × W × H): approx. 2,098 × 2,316 × 1,405 mm Hydraulic oil capacity: approx. 250 liters Feed hopper: approx. 1,400 × 1,400 mm The briquette length is adjustable and can be regulated via the feed screw speed. Depending on the material feed into the press chamber, the briquette length varies. The control is managed via a time relay in the control cabinet, which determines the operating time of the feed screw motor. The machine has been used very little and is in excellent, well-maintained condition. Sale due to underutilization. Test run on site possible. Loading on site possible. Original operating manual (Hungarian) available. A German version can be provided by the supplier if required. The integrated hydraulic system features automatic oil preheating as well as an oil cooling function. This ensures an optimal hydraulic oil temperature range, even at low ambient temperatures and during continuous operation. This enables reliable 24/7 operation of the machine. The price is fair, considering the condition and the very low operating hours. Inspection is possible at short notice by appointment. If interested, I look forward to your message.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, BFT 90/5-2 CNC SINUMERIK 840D/840DE Technical Main Data Spindle diameter: 102 mm Tool holder: ISO 50 Operating manual (see photo) Machine type: Table-type boring mill Brand: UNION KARL MARX STADT Model: BFT 90/5-2 Year of manufacture: 1989 Control system: CNC Country of origin: Germany Freight terms: ex location Rostock, loaded onto truck, unpacked Storage location: Rostock Delivery time: immediately Price: On request Technical Details Spindle diameter: 102 mm Travel (X-axis): 1600 mm Codpfx Agey Aiare Dogt Travel (Y-axis): 1210 mm Travel (Z-axis): 980 mm B-axis (table): 360° Drilling depth: 710 mm (W-axis) W-axis (spindle longitudinal travel): 710 mm Table load capacity: 2.5 / 3.0 t Control for programming: Numerical CNC Table size: 1000 x 1120 mm Feed rates X/Y/Z/W: 1 - 3180 mm/min Tool holder: ISO 50 Rapid traverse X/Y/Z: 4000 mm/min Rapid traverse W: 3150 mm/min Max. spindle speed: 4-1600 rpm Total power requirement: 27 kW Approximate machine weight: 9700 kg Electrical cabinet dimensions (LxWxH): 2500 x 650 x 2200 mm Machine dimensions (LxWxH): 5.2 x 3.3 x 2.8 m Additional information Further features: - Thread cutting via Z-axis possible - Coolant system with pump - Hydraulic unit

Kondisi: baik (bekas), de-to-hu-1 Codpfxoyv Apte Ag Dogt

Kondisi: bekas, Tahun pembuatan: 2023, Travel in X-axis: 3000 mm Travel in Y-axis: 820 mm Travel in Z-axis: 720 mm CNC control: Mazatrol Smooth G Spindle taper: SK 40 Spindle speed range: 35 - 12,000 rpm Spindle drive: 15 kW Distance nose of spindle to table surface: 140 - 860 mm Table load capacity: 2,500 kg Rapid traverse (X/Y/Z): 50 m/min Table width: 3,500 mm Table length: 820 mm Table height above floor: 870 mm Number of T-slots: 7 T-slot width: 18 mm T-slot spacing: 100 mm Automatic tool changer: 48 positions Tool change time: 4.7 sec Max. tool diameter with 2 free spaces: 130 mm Max. tool diameter when fully loaded: 80 mm Max. tool weight: 8 kg Max. tool length: 350 mm Required air pressure: 5 - 9 bar Air consumption: 260 l/min Codpfeyvvlujx Ag Degt Electrical specifications (voltage/frequency): 400 V / 50 Hz Coolant tank: 500 l Total power consumption: 46.7 kW Machine weight approx.: 15.4 t Installation space required approx.: 5.3 x 3.6 x 3.3 m Standard machine incl. the following special equipment: - Preparation for dual oil mist extraction - Air cooling through the rotating milling spindle - 48-tool magazine - Electronic handwheel - Three-color LED signal light - Additional interior workspace lighting - Air blast device at milling spindle - High-pressure coolant supply through spindle (15 bar) - Preparation for MAZAK Monitoring - Chip conveyor, discharge left (Crowther) - Manual grease gun - Grease cartridge - Mazak API - Drilling cycle with controlled chip breaking - Synchronous tapping - Rapid traverse constant inclination angle STANDARD EQUIPMENT - Transformer for European market - USB port (1 port) - Mazak standard paint - Workspace lighting SAFETY FEATURES - Operator door with interlock switch - Workspace enclosure - Splash guard covers workspace from the side - Fully enclosed working area - Protection against chips, coolant, and access to the workspace during automatic machining - Safety devices according to global standards COOLANT SUPPLY - Coolant supply through spindle (pump pressure = 5 bar) - Complete coolant system, including pumps, valves, piping, and nozzles for efficient production of high-quality components FACTORY AUTOMATION - Automatic ON/OFF and warm-up function - Automatic warm-up activation via digital timer MEASURING SYSTEM - Tool length measurement and tool breakage detection NUMERICAL CONTROL - Horizontally adjustable NC operator panel - Relocation Detector - Mazatrol SmoothG control - 19" LCD color screen (touch screen) - Mazak tapping/drilling cycle Tornado (Mazatrol) - EIA/ISO input function - Tool path simulation in the background - 3D coordinate transformation - Form compensation for rotating axes - Mazacc-2D software (contour compensation) - Mazacc-3D software package - Additional required: MAZACC-3D high-speed software package (NO456) - High-smoothing control - LAN interface - SD memory card interface - Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece form compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Form compensation for rotating axes - NO497 D) High-precision control for finishing - Seamless corner control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse path rounding function - Absolute positioning system - All dimensions, weight, and performance specifications are non-binding - - Used ma...

Kondisi: bekas, Technical data: Pressing force: 178 kN Drive power: 4 kW Cycle time: 23 s Loading height: 928 mm Loading aperture width x height: 1195 x 558 mm Bale length x width x height: 1200 x 780 x 1000 mm Cgjdpfev Akmzsx Ag Dot Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Machine weight: 1300 kg 4-fold strapping with polyester tape Year of manufacture: 2010-2013

Kondisi: bekas, Tahun pembuatan: 2019, x-axis travel 2,000 mm y-axis travel 820 mm z-axis travel 720 mm Control Mazatrol Smooth G Spindle interface SK 40 Spindle speeds 35 - 12,000 rpm Spindle drive 22 kW Distance spindle nose to table top 140 - 860 mm Table load capacity 1,700 kg Rapid traverse x/y/z 50 m/min Table width 820 mm Table length 2,500 mm Table height above floor 870 mm T-slots 7 T-slot width 18 mm T-slot spacing 100 mm Tool changer 48 positions Tool change time 4.7 sec Tool diameter (with 2 free positions) 130 mm Tool diameter (fully loaded) 80 mm Max. tool weight 8 kg Max. tool length 350 mm Required air pressure 5 - 9 bar Air consumption 260 l/min Electrical specification - voltage/frequency 400 V / 50 Hz Coolant tank 450 l High-performance coolant system 25 bar Total power requirement 46.7 kW Machine weight approx. 14.8 t Space requirements approx. 4.3 x 3.6 x 3.1 m STANDARD EQUIPMENT - Transformation for the European market - USB port (1 port) - Mazak standard color - Spindle speed 12,000 rpm (SK 40 steep taper) - Work area lighting SAFETY EQUIPMENT - Operator door with interlock switch - Work area enclosure - Splash guard covers surround the work area from the sides - Fully enclosed work area - Protection against chips, coolant, and access to the work area during automatic operations - Safety features in compliance with international standards COOLANT SUPPLY - Coolant supply through the spindle (pump pressure = 5 bar) - Complete coolant system includes pumps, valves, piping, and nozzles for efficient production of quality components FACTORY AUTOMATION - Automatic on/off and warm-up function - Automatic warm-up activation via digital timer MEASURING SYSTEM - Tool length measurement and tool breakage detection CHIP DISPOSAL - Factory preparation for chip conveyor (left side) NUMERICAL CONTROL - Fixed control/operating unit - Relocation Detector - Mazatrol SmoothG CNC - 19" LCD color display (touch screen) - Mazak thread drilling / drilling cycle Tornado (Mazatrol) - Boring and threading mode for helical machining allows various diameters to be machined at high speed with a single tool. This function minimizes programming and machining times. - EIA/ISO input function - Background tool path simulation - The tool path of a program can be checked while another program number is being executed in automatic mode. - 3D coordinate transformation - Form compensation for rotary axes - Mazacc-2D software (profile compensation) - Accuracy is maintained at high feed rates. - Mazacc-3D software package for high-speed machining - High-speed, high-accuracy machining for contours defined in very fine program increments. - MAZACC-3D High-Speed Software Package (NO456) is additionally required. - High smoothing control - LAN interface - SD memory card interface Cgedpfxjtuggco Ag Dst - Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece profile compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Profile compensation for rotary axes - NO497 D) High precision control for finishing operations - Seamless corner control - ...

Kondisi: baru, Tahun pembuatan: 2025, jam operasional: 1.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SCR 44 2SF, de Cgodpfx Agjg Uwmqe Dst

Tahun pembuatan: 2019, jam operasional: 17.716 h, Kondisi: siap digunakan (bekas), Data Umum Lebar pengukuran: 1920 cm Kedalaman pengukuran: 7750 cm Berat mesin: 26210 kg Tinggi pengukuran: 2410 mm SUMITOMO SHI DEMAG El-Exis SP 350/820-920 diproduksi pada tahun 2019. Mesin injection moulding listrik yang kokoh dengan diameter sekrup 40 mm dan gaya penahan 3.500 kN. Mesin ini telah beroperasi selama 17.716 jam dengan 12.440.761 siklus, memastikan kapasitas produksi yang tinggi. Jangan lewatkan kesempatan untuk membeli mesin injection moulding listrik SUMITOMO SHI DEMAG El-Exis SP 350/820-920 ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Injection Moulding Cjdpfxex D Nx Ij Ag Dsgt

Kondisi: diremajakan ulang (bekas), Panel Depan Operator Pengganti 6FC5203-0AF02-0AA0 0.60000499 00076 SIEMENS Cedpfxsyryggo Ag Dogt Pabrikan: Siemens Seri: SINUMERIK Tipe: Panel Depan Operator Nomor Suku Cadang: 6FC5203-0AF02-0AA0 Nomor Artikel: 204558 Nomor Gambar: 90210001109

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 37.049 h, gaya penjepit: 4.000 kN, berat keseluruhan: 21.000 kg, This Arburg 820 S 4000 - 2100 injection moulding machine was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter ranging from 60 to 100 mm, and a maximum shot weight of up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and offers a hydraulic pump drive power of 55 kW. Ideally suited for high-precision plastic injection moulding applications. Please contact us for more information about this machine. Clamping unit • Max. locking force: 150 kN • Max. opening force: 100 kN / increased: 800 kN • Max. opening stroke: 700 mm • Min. mould height: 350 mm • Max. platen distance: 1050-1550 mm • Tie bar spacing (clear): 820 × 820 mm • Mould mounting platens (W × H): 1171 × 1171 mm • Max. mould half weight: 4500 kg • Max. ejector force: 100 kN • Max. ejector stroke: 250 mm Hydraulics / Drive / Miscellaneous • Hydraulic pump drive power: 55 kW • Total installed power: • 4000-2100: 88.9 kW • 4000-3200: 96.2 kW • Colour: Plastic-coated structure (light grey / mint green / rapeseed yellow) • Control cabinets: Safety standard DIN EN 60204 • Combined power sockets: 1 Schuko + 1 Cekon • Injection unit power supply: 1 × 16 A Injection unit • Effective screw length (L/D): 23/20/17.5 | 70/80/90 | 23/20/18 • Screw diameter (mm): 60/65/70 | 80/90/100 | 60/65/70 • Max. theoretical shot volume (cm³): 792/1078/1407 | 2513/3462/4240 | 1132/1608/2036 • Max. shot weight (g PS): 293/384/1826 | 1255/1469/1860 | 820/1167/1477 • Max. injection pressure (bar): 2500/2000/1530 | 2500/1500/1200 | 2500/2000/1530 • Max. injection rate (cm³/s): 294/362/400 | 812/1030/1250 | 312/396/440 • Max. injection rate with accumulator (cm³/s): 354/450/502 | 1188/1552/1964 | 375/475/528 • Back pressure positive/negative (max., bar): 350/50 | 350/50 | 350/50 • Max. screw surface speed (m/s): 0.38 | 0.28 | 0.28 • Max. screw torque (Nm): 2057/2247/2247 | 6757/80 | 2057/2247/2247 • Max. nozzle contact force: 110 kN • Max. nozzle stroke: 600 mm Csdpfsydpvbjx Ag Degt • Heating zones / heating power: 6 × 4500 + 3300 | 6 × 5500 + 4300 • Installed nozzle heater: 1000 W | 1250 W Dimensions and weights (basic machine) • Clear length: 490 mm • Electrical connection (fusing) motor + heating: 250 A • Electrical connection (fusing) motor: 125 A • Electrical connection (fusing) heating: 50 / 63 A Additional equipment • SEPRO SR AXESS 30 S3 robot (2008)