Mesin penggilingan multi-spindel yang presisi

Costa K24/S

Kondisi: bekas, Tahun pembuatan: 2018, en: Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMISABLE PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTELY PRECISE MACHINING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: EASY AND INTUITIVE TECHNICAL SPECIFICATIONS Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y, one shared) Horizontal spindles (along Y axis) Number 2 (1+1) Horizontal spindles (along X axis) Number 1 Fixed groove saw (direction) X Groove saw diameter mm 100 Max. groove saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Air consumption Nl/cycle 90 Extraction requirement m3/h 1200 Extraction air speed m/sec 20 Extraction nozzle diameter mm 120 GENERAL FEATURESUniversal CNC drilling machine with fixed gantry work table and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Grooving with integrated groove saw in "X" direction Self-supporting frame Machine base in steel tube construction to provide a large base for the work table. The structure is positioned on 3 self-levelling feet. The electrical cabinet is integrated into the machine base. Central Bakelite support table "Easy Motion": - an MDF sector for through drilling, automatically swivelling away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller track to facilitate panel sliding - left and right stops - a manually adjustable central alignerIt is necessary to use the left and right stops to drill the two opposite panel sides horizontally in the "X" direction. Panel positioning along the X-axis by vacuum suction cups. Unit carriage This is a gantry structure in steel tube construction. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles- chuck D10 mm- spindle spacing 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 chuck D10 mm) - speed 3350 rpm- 1 integrated saw unit in X (max. diameter 100 mm) - saw blade speed 4300 rpm- motor power 1.5 kW - vertical pneumatic stroke per spindle 70 mm - horizontal pneumatic stroke of the drilling unit Positioning of the workpiece and drive of the working unit A CNC-controlled vacuum cup clamps the workpiece and positions it sequentially under the working unit during machining. X and Y axis movement on THK linear guides with reinforced toothed belt transmission; Z axis movement is pneumatic on ball-bushing guides with position stop adjustable via the working unit position. Positioning of the work units via state-of-the-art control and drive technology -CONTROL The control system was specially developed for industrial use. Hsdpfx Ajvwbp Asdqsu

Kondisi: bekas, - Working width (mm): 140 - Shafts: 7 1st shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5th shaft: top Hjdpfsrg Exrsx Adqsu 6th shaft: bottom 7th shaft: universal shaft

Kondisi: baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: belum diuji, lebar kerja: 220 mm, tinggi penyerutan: 120 mm, diameter spindel: 50 mm, lebar perataan: 220 mm, tinggi kerja: 120 mm, berat keseluruhan: 7.500 kg, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 6.000 rpm, jenis penyesuaian ketinggian: listrik, jenis arus masuk: tiga fasa, jumlah spindel: 10, daya: 105 kW (142,76 hp), frekuensi input: 50 Hz, Perlengkapan: kabin, rem mesin, Weinig Hydromat 22 B With grooved bed 10 spindles, Working width: 220 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 8–40 m/min, Spindle arrangement: 1 – Bottom (7.5 kW) – with hydraulic clamping 2 – Right (7.5 kW) 3 – Left (11 kW) 4 – Right (7.5 kW) – with jointer 5 – Left (7.5 kW) 6 – Top (15 kW) – with hydraulic clamping 7 – Bottom (7.5 kW) – with hydraulic clamping 8 – Top (7.5 kW) – with hydraulic clamping and jointer Hsdju Udd Sopfx Adqou 9 – Bottom (7.5 kW) – with hydraulic clamping and jointer 10 – Universal (7.5 kW) 6 powered feed rollers in the table

Tahun pembuatan: 1996, Kondisi: bekas, COSTA 60 CC/2 1150 CALIBRATING AND SANDING MACHINE - CE COMPLIANT - USED Hjdpfx Adeimtbljqsu - Working width: 1150 mm - Roller/roller configuration - Variable feed belt speed - Voltage: 380V/50Hz - Serial no.: 951121/DR3 - Year: 1996

Kondisi: bekas, Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, We offer this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year of manufacture: 2017 Condition: used If you have any questions or need further information, please feel free to send us a message or give us a call. Upon request, the order confirmation with all technical details can be sent. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece feed Feed speed adjustable from 5 to 25 m/min, frequency controlled, working height fixed at 880 mm, incl. integrated control cabinets; including adjustable fence with digital display and including counter fence with central width adjustment with centrally height-adjustable and laterally adjustable top pressure beam with digital display, which presses plate-shaped workpieces using ball-bearing-mounted rubber rollers (axle spacing 38 mm), including support rollers for extending the support surface for large workpieces, extendable sideways by approx. 1,500 mm. 4 lateral guide rollers between the sanding units for safe transport of strips 1 Industrial PC 3.0/4" LCD-TFT color display, 800 x 600 pixel resolution CF card 1GB Operating system: Windows Embedded Standard Touch screen version with display for production and downtime. Ethernet connection possible. Hsdpfoy A D Ecsx Adqeu 2 belt sanding units "M 4" – Pos. 1 and 2 for sanding straight edges, intermittent belt cleaning system, belt breakage switch, tool holder with quick-change system, baseplate for sanding tool, designed for electronic traverse control for automatic positioning and lifting of the sanding tool, operates in both directions. Belt dimensions: 2,300 x 80 mm Sanding belt speed: 0/7–12 m/s Motor power: 3.0 kW electronically frequency-controlled stepless speed adjustment of the sanding belt. Electronic sanding pressure control via terminal. 2 oscillation devices for M4 (Positions 1 & 2) For full utilization of sanding belt 2 belt sanding units "K 4" – Pos. 3 and 4 incl. stand, for sanding small profile sections, also for deburring edges; tiltable 90° upwards and 45° downwards, belt breakage switch, tool holder with quick-change system, baseplate for sanding tool, intermittent belt cleaning system, designed for electronic traverse control for the automatic positioning and lifting of the pressure tool, including dual direction operation; set-up for manual adjustment and digital readouts for adjustment axes. Belt dimensions: 2,000 x 50 mm Sanding belt speed: 0.5–8 m/s Motor power: 1.1 kW electronically frequency-controlled stepless speed adjustment of the sanding belt. Electronic sanding pressure control via terminal. 4 electronic traverse controls for fully automatic and timed positioning and lifting of the sanding tools depending on the set drive speed, sanding pressure, and aggregate angle setting. 2 steel tools for straight edge, suited for air-cushion sanding, including baseplate, for one M4 unit, Item No. 9000191310 2 steel profile tools suited for air-cushion sanding, including baseplate, for one K4 unit, Item No. 20000025684

Kondisi: bekas, Tahun pembuatan: 2005, USED DMC TECHNOSAND TC 1100M3 CALIBRATING AND SANDING MACHINE, CE COMPLIANT - Roller: 18.5 kW - 90 Sh - Ø 250 mm - Roller: 15.0 kW - 70 Sh - Ø 250 mm - Roller: 11.0 kW - 40 Sh - Ø 330 mm - 3 independent motors - Working width: 1100 mm Hjdpfx Aemxggyedqou - With pads (short piece device) - Year: 2005

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, SCHEER BS 5102-V Dowel Hole Drilling and Insertion Machine The BS 5102-V is a high-performance, electronically controlled machine for precise and efficient end-grain drilling as well as the exact insertion of wooden dowels. It is ideally suited for industrial woodworking—particularly in furniture and cabinet manufacturing. Condition & Service: Condition: As new (completely overhauled and newly painted) Functionality: Fully operational Warranty: 12 months CE compliant / Dust tested Technical Data & Features: Workpiece width: min. 60 mm / max. 1200 mm (pendulum operation: max. 600 mm) Workpiece thickness: 15–60 mm Drilling depth: max. 45 mm Vertical stroke of carriage: 7.5–50 mm Min. lateral drilling distance: 10 mm Drilling unit: 9,000–18,000 rpm (adjustable), 1.5 kW Drilling system: M10 external (Scheer system) Servo motor: 0.54 kW, max. 60 m/min feed rate Dowel size: 8 x 30 / 8 x 50 mm, DIN 68150 Form A Hodpfx Adeunvg Teqeu Glue system: 1:1 diaphragm pump, max. 7 bar Glue reservoir: spiral feeder, 3.5-liter capacity Extraction connection: Ø 80 mm | Airflow: 540 m³/h at 30 m/s Clamping cylinders: 4 short-stroke cylinders (Ø 63 mm), angled clamping Power supply: 400 V, 50 Hz Machine Construction & Operator Comfort: Controlled X-axis with machine base as workpiece support X-carriage with linear guide and rack-and-pinion drive Servo drive for feed system Clamping portal with 4 adjustable clamping cylinders—controllable in 2 groups Stop rulers: left, right and center on the table Drilling depth and dowel projection adjustable directly on the carriage Cut-off device & Safety Systems: Protective hood interlock Lamella safety curtain Integrated extraction ducts Control & Operation: PC with Siemens PLC control User interface: WP-Studio—dialog-oriented programming Operating system: Windows 10 Display: 17" color monitor Separate workpiece programs for left & right control panels (mirroring possible) Glue quantity individually adjustable per program Network capable (LAN/WLAN), compatible with Windows, Linux, Mac, Novell Remote maintenance & software updates possible Optional Equipment: Y-axis: automatic adjustment of drilling and glue application modules Electronic glue monitoring: ensures controlled glue flow Additional drilling unit for surface drilling: Drill motor: 1.5 kW at 18,000 rpm Drill feed: pneumatic Drill stroke: max. 25 mm Depth stop: spindle & SIKO display Drill distance to reference edge: 5–35 mm Mount: M10 external, max. Ø 35 mm Workpiece length: min. 70 / 90 mm Guarantee & Reliability: We are confident in the stability and manufacturing quality of our machines—that's why you receive a 7-year warranty on the machine frame, especially the supporting structure and guide mechanism. Electrical supply parts and standard wear parts are excluded. Additionally, we provide a 1-year warranty on the complete machine (incl. control system, hydraulics, pneumatics, etc.). Conclusion: This machine combines modern control technology, high build quality, and user-friendly operation. Ideal for precise dowel hole drilling and automated dowel insertion—reliable and efficient in continuous operation. 📞 Contact us for an individual offer or to schedule a demonstration. Machine available from stock. Delivery, commissioning, and training optionally available.

Tahun pembuatan: 2007, Kondisi: sangat baik (bekas), I am selling a double-end tenoning and milling machine FRIULMAC IDRAMAT, year of manufacture 2007. Hjdpfx Asib A E Asdqsu Working width up to 2500 mm Configuration left side / fixed: 1 + 1 unit sawing aggregates top + bottom / 3.0 + 3.0 kW 1 + 1 unit grooving saw aggregates front + rear with pneumatic lift Configuration right side / movable: 1 + 1 unit sawing aggregates top + bottom / 3.0 + 3.0 kW 1 unit special milling aggregate top / 5.5 kW Upper material pressure belt with feed. Special design, also suitable for edge sizing. Through-feed machine. Siemens Simatic control panel. Condition: Very good. Available immediately.

Kondisi: bekas, Tahun pembuatan: 2002, WEINIG PROFIMAT 23 FORTEC 5+1 SPINDLE MOULDER - CE COMPLIANT - USED Hodjwrx Nbopfx Adqeu - Equipped with ATS device - 1st bottom horizontal spindle - 2nd right vertical spindle - 3rd left vertical spindle - 4th top horizontal spindle - 5th bottom horizontal spindle - 6th universal spindle - Working width: 230 mm - Cardan shaft feed - Year: 2002

Kondisi: bekas, Tahun pembuatan: 1993, ANGULAR PROFILING MACHINING CENTER Brand: SAC Model: P4 Hjdpfx Aderx Tcgoqou Serial No.: 9304 Year: 1993 Model: F5 Serial No.: 93030 Year: 1993 Machines available for inspection in our workshops SPECIFICATIONS: - Cutter spindle speed: 6,000 rpm