PUSAT PROFIL SUDUT - TAS

SAC P4 & F5

Kondisi: baru, de_Bester Preis 4499 EUR (EXW Jonava, Litauen) Abmessung des Schiebetisches: 2200 x 375 mm Njdsdnxydspfx Am Aowf Max. Schnittkapazität: 1500 mm Schnittbreite zwischen Sägeblatt und Parallelanschlag: 1140 mm Sägeblattdurchmesser: 400 mm Schnitthöhe (90°): 115 mm Schnitthöhe (45°): 105 mm Drehzahl der Hauptsäge: 4500/6000 U/min Durchmesser der Hauptspindel: 30 mm Sägeblatt schwenkbar: 0-45° Elektrisch gesteuerte Sägeblatthebung/-senkung Hauptmotor: 5,5 kW Vorritzsägeblatt-Durchmesser: 120 mm Drehzahl der Vorritzsäge: 7000-8000 U/min Vorritzsägendurchmesser (Achse): 20 mm Vorritzmotor: 1,1 kW Gewicht: 700 kg * Bei Verwendung des 400-mm-Sägeblatts muss das kleinere entfernt werden. Ein reduziertes Sägeblatt darf nur mit einer maximalen Hauptschutzabdeckung von 350 mm verwendet werden.

Kondisi: bekas, Tahun pembuatan: 1997, - Edge banding unit - Cross-cutting unit Nwedpfed Inktsx Am Aof - Milling unit - Fine milling unit - Scraper - Buffing unit

Kondisi: sangat baik (bekas), Four-sided planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor: 4 kW Fully adjustable heads Electrically adjustable planing height and width Spindle diameter: 40 mm Feed via cardan shaft rollers, stepless adjustment Robust planer by WEINIG Machine length: 415 cm Nwsdpjrigxyjfx Am Asf The machine has been inspected and is in original condition

Kondisi: baru, Glass beading nailer "2 P Jumbo Automatic E.C." – New – Your advantages: - Corner joints are closed - No open glazing bead joints - No color differences when painting - Glazing bead frames can be easily assigned Staple Corner Joining Machine 2P Jumbo Automatic E.C. for stapling glazing bead frames. Choice between automatic and manual operation; With angle stop, clamping device from above and in front Pressure adjustable separately. Insertion of parallel and stacked staples possible via electronic programming control. Stapler can be mounted on a suitable worktable, Operation via foot pedal. ----- Price for this configuration on request! Plus statutory VAT as well as packaging/shipping ----- Images show the Staple Corner Joining Machine 2P with the optional Nwsdpfx Aevnh T Njm Aef mobile worktable (see details under surcharges) Surcharges: ----- Mobile worktable Height adjustable from 700 - 1000 mm, 2 removable support rails 1000 mm long, 2 swiveling and adjustable support rails 1000 mm, support rails covered with felt, 4 swivel castors, 2 with brakes. ----- Surcharge: 1,321.00 EUR net Staples: Packs 15 mm staples (pack of 2,000 pcs.): Price 22.00 EUR 12 mm staples (pack of 3,000 pcs.): Price 32.00 EUR 10 mm staples (pack of 3,000 pcs.): Price 32.00 EUR Dimensions and Weights ----- Jumbo Automatic E.C. 470 x 370 x 300 mm, 35 kg Worktable 32 kg All prices net. Plus statutory VAT. Ex works, plus packaging and shipping (Technical data as per manufacturer – no guarantee!)

Kondisi: bekas, Tahun pembuatan: 2018, en: Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMISABLE PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTELY PRECISE MACHINING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: EASY AND INTUITIVE TECHNICAL SPECIFICATIONS Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y, one shared) Horizontal spindles (along Y axis) Number 2 (1+1) Horizontal spindles (along X axis) Number 1 Fixed groove saw (direction) X Groove saw diameter mm 100 Max. groove saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Air consumption Nl/cycle 90 Extraction requirement m3/h 1200 Extraction air speed m/sec 20 Extraction nozzle diameter mm 120 GENERAL FEATURESUniversal CNC drilling machine with fixed gantry work table and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Grooving with integrated groove saw in "X" direction Self-supporting frame Machine base in steel tube construction to provide a large base for the work table. The structure is positioned on 3 self-levelling feet. The electrical cabinet is integrated into the machine base. Central Bakelite support table "Easy Motion": - an MDF sector for through drilling, automatically swivelling away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller track to facilitate panel sliding - left and right stops - a manually adjustable central alignerIt is necessary to use the left and right stops to drill the two opposite panel sides horizontally in the "X" direction. Panel positioning along the X-axis by vacuum suction cups. Unit carriage This is a gantry structure in steel tube construction. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles- chuck D10 mm- spindle spacing 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 chuck D10 mm) - speed 3350 rpm- 1 integrated saw unit in X (max. diameter 100 mm) - saw blade speed 4300 rpm- motor power 1.5 kW - vertical pneumatic stroke per spindle 70 mm - horizontal pneumatic stroke of the drilling unit Positioning of the workpiece and drive of the working unit A CNC-controlled vacuum cup clamps the workpiece and positions it sequentially under the working unit during machining. X and Y axis movement on THK linear guides with reinforced toothed belt transmission; Z axis movement is pneumatic on ball-bushing guides with position stop adjustable via the working unit position. Positioning of the work units via state-of-the-art control and drive technology -CONTROL The control system was specially developed for industrial use. Nedpfx Aovwbp Aom Aswf

Kondisi: baik (bekas), Tahun pembuatan: 2020, de_Maschine Masterwood Project 351 L – 3-Achs CNC-Bearbeitungszentrum Beschreibung - Luftgekühlter 3-Achs-Fräsmotor, 17,5 PS (HSK-63F) - Statischer Frequenzumrichter zur programmierbaren Drehzahleinstellung 1.500–24.000 U/min - Werkzeugwechsler mit 22 Positionen - 6 pneumatische, absenkbare Anschläge für das Beladen/Ausrichten schwerer Werkstücke - Vorbereitung zur Montage von Spannsystemen - 2 horizontale Klemmzangen für Brettschichtholz - 6 Nullpunktabfragen entlang der X-Achse (Positionierung der Platten auf der Rückseite der Auflagen) - 8 Nullpunktabfragen entlang der X-Achse (Positionierung der Platten mittig der Auflagen) - Komplette Referenzierung auf der rechten Seite entlang der Y-Achse - Komplette Referenzierung auf der linken Seite entlang der Y-Achse - 2 Arbeitsfelder - 1 x 100 m³ Vakuumpumpe - 24 Vakuumsauger - Fernbedienung mit Digitalanzeige - Automatisches Werkzeugvermessungssystem - Transportband für Späne/Abfall - Bohraggregat mit 19 Spindeln (32 mm-Achsabstand), 2,2 kW - 7 vertikale Bohrspindeln in X-Richtung - 6 vertikale Bohrspindeln in Y-Richtung - 4 horizontale Bohrspindeln in Y-Richtung - 2 horizontale Bohrspindeln in X-Richtung (Alle Bohrspindeln einzeln programmierbar) - Steuerungseinheit inkl. PC - SINCRO CAD/CAM-Software MASTERWORK Njdpjvu U Itsfx Am Aowf Technische Daten Arbeitsbereich X: 5.130 mm Arbeitsbereich Y: 1.550 mm Verfahrgeschwindigkeit X/Y: 80 m/min Verfahrgeschwindigkeit Z: 25 m/min Max. Werkstückhöhe: 200 mm Fräsmotorleistung: 17,5 PS (S1) Drehzahl Fräsmotor: 1.500–24.000 U/min Bohraggregat: 3 PS Werkzeugsystem: HSK63-F Werkzeugplätze: 22 Vakuumpumpe: 100 m³ Absaugstutzen: 250 mm Luftförderleistung: 4.500 m³/h Luftgeschwindigkeit: 30 m/s Druckluft: 7 bar Druckluftverbrauch: 300–500 l/min Absicherung: 40 A Gewicht: 7.000 kg (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tested equipment, functional, used BIESSE Polymac LATO 38 edge bander - Glue pot - Guillotine - Pre-cutting / end trimming - 1 tiltable top/bottom trimming unit - 2 tiltable top/bottom trimming units - Outfeed brushes. Njdpfx Aouhm Adem Aowf Possibility to test on site Machine available for inspection in our Cosne workshop Price includes loading onto truck

Tahun pembuatan: 2014, Kondisi: bekas, ProLogic window construction software FenOffice 14 Nwjdpfxjrci S So Am Aof Conturex

Kondisi: bekas, Technical data: Max. planing width: 230 mm Max. planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle configuration: bottom 5.5 kW right + left 11 kW top 7.5 kW universal 5.5 kW Each spindle driven by a separate motor Number of steel feed top rollers: 5 Number of rubber feed top rollers: 3 1 rubber roller on the table Extraction port diameter: 150 mm Infinitely variable feed speed: 4-24 m/min Nsdpfx Ajmiik Tsm Aswf Cardan shaft feed drive Table lubrication pump Operating pressure: 6 bar Electric height adjustment of the machine body Power supply: 400 V Overall dimensions: Length: 4,240 mm Width: 1,550 mm Height: 1,560 mm

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), I am selling a complete window manufacturing set: Nedpfx Aefzzhyem Aewf - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profiling and overlay centre Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI - Available immediately - Total price: 17,000 EUR - Condition: very good