Perangkat las

Craftweld Craft-Laser 800

Kondisi: baru, Tahun pembuatan: 2025, tinggi total: 4.000 mm, panjang total: 7.000 mm, lebar total: 3.000 mm, masa garansi: 24 bulan, suhu: 80 °C, kebutuhan udara: 36.000 m³/jam, tegangan masuk: 380 V, kapasitas pemanasan: 345 kW (469,07 hp), daya: 40 kW (54,38 hp), bahan bakar: gas petroleum cair (LPG), konsumsi energi: 40 kWh, bahan isolasi: Mineralwolle, ketebalan isolasi: 50 mm, daya nominal: 345 kW (469,07 hp), Perlengkapan: pencahayaan, MAIN STANDARD Our paint booths are designed to meet all essential requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. The processes within the booth are managed by a PLC system, ensuring consistent maintenance of the desired values. OPERATING PRINCIPLES OF THE BOOTH The processes in the booth are controlled via a control panel, which manages the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through intake filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) capture paint particles, and the air passes through final exhaust filters prior to being released. FLASH-OFF PROCESS After painting, the booth continues operation for approximately 15 minutes to remove residual solvents and thinners. During this phase, fresh air from outside circulates inside the booth. DRYING PROCESS In this phase, 80% of the air passing through the booth is heated to 60°C and distributed into the booth. Since 20% of the solvents are released during drying, these are expelled with the exhaust air. Industrial paints are typically dried at 60°C, though the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying process, the heating coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the booth, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels manage the functions and operation of the machinery and devices within the booth. The panel is constructed from durable galvanized sheet metal and steel profiles, and is fully enclosed for protection against dust and moisture. Electrical Devices and Control Panel: • The control panel features essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to allow for booth relocation if necessary. • Operating devices use 380 V 50 Hz, while control units operate at 220 V. • The booth’s operating time can be monitored on the electronic control panel for easy maintenance tracking. • Temperature and time values for paint flash-off, intermediate drying, and final drying can be easily set to the required values on the digital display of the electronic control panel. Cjdswzmcbspfx Am Isgt • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1989, nomor mesin/kendaraan: SI73, Technical Data: 1x Demag KBK 1 pillar-mounted slewing crane, rated load 250 kg Maximum capacity at full outreach: 250 kg / 0.25 t Codewv N Ezspfx Am Iogt Height: approx. 2.83 m Underside of jib: approx. 2.3 m Outreach: 3 m Hook height: approx. 1.85 m Total weight: approx. 400 kg, including base plate 71x71 cm Equipped with Demag PK chain hoist, 250 kg lifting capacity Including pin, cable trolley, trolley, end cap, etc. Slewing range: 300°, connection: 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Additional cranes available, load capacities 80-5000 kg; please enquire See pictures Shipment by freight forwarding or collection only by prior arrangement

Kondisi: baru, wisniowski-schiebetor-6x2m Cgedpfx Aeh I Nvbsm Ist

Kondisi: bekas, 2,000 running meters of structural profiles, U-shape Used material, in good condition, see photos Galvanized Length per piece: approx. 467 cm Profile: 7.5/8 cm Material thickness: approx. 3 mm Weight per piece: approx. 43 kg Negotiable price: €4.90 net per running meter ex stock Codpsulwiqsfx Am Ijgt Available individually or as a package One package consists of 20 units – approx. 93.4 running meters Goods are in stock. Transport available upon request. Inspection possible at any time by appointment. Further information on request. Constantly over 5,000 running meters of pallet racks from various manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices ex VAT ex stock.)

Tahun pembuatan: 2012, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Rösler RSKI 1400-SAT – Satellite Indexing Blast Cabinet, Automatic, 2 Nozzles For sale is a near-new Rösler injector blasting cabinet, model RSKI 1400-SAT. This system is designed for the automatic blasting of small and medium batches and is ideally suited for workpieces with a maximum diameter of approximately 280 mm. Workpieces are evenly blasted via a rotating satellite indexing table – ideal for cleaning, deburring, descaling, derusting, or roughening precision parts. After loading the raw parts, the blasting time per satellite can be set on the control panel. Once the presence of raw parts is confirmed using the button located next to the cabin door, each satellite is approached and processed in turn. After the blasting time has elapsed and all parts have been treated, a completion notification appears and the system can be loaded and unloaded again. Thanks to the generously sized filtration system, the blasting unit is suitable for almost all blasting media, including fine mineral abrasives without issue. Originally, the system was used in medical engineering, and therefore, the interior is rubber-lined. For other industries or users, this offers the benefit of additional wear protection for both the blasting medium and the machine and also dampens noise, making the unit more efficient and quieter than an unlined cabinet. By removing the front handhole cover, manual blasting is also possible at any time with minimal conversion effort. Additional nozzles can also be retrofitted on request. Key technical data (excerpt): - Manufacturer: Rösler Oberflächentechnik GmbH - Model: RSKI 1400-SAT Satellite Blasting Cabinet - Year of manufacture: 2012 - Blasting system: Injector blasting with 2 boron carbide blasting nozzles SPI 38 - Satellite rotary table with six workpiece fixtures - Power supply: 400 V, 3Ph/N/PE, 50 Hz - Connected load: 4.0 kW - Main drive: 0.75 kW - Control voltage: 24 V DC - Separate control cabinet, operation via push button/switch and foot switch Your benefits at a glance: - Automatic satellite blasting cabinet for batch and precision parts - Originally configured for medical engineering Csdpfx Amsyudhao Iogt - Uniform all-round processing of workpieces without part contact - Two blasting nozzles for excellent coverage and reduced processing times, optionally expandable - Large front door and viewing window for convenient loading and effective process monitoring - Compact, robust construction – easy to integrate into existing production environments

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 9420358 IMA, ElmaTech MIDISpot Vision QSVM 9000/12000T + ELMA Vision VM – Medium Frequency Spot Welding System Cgjdpjx Dch Aofx Am Iet Manufacturer: ElmaTech GmbH Location: Morsbach, Germany System comprises: MF Inverter: MIDISpot Vision QSVM 9000/12000T Serial number: 9420358 IMA Weight: 95 kg MF Transformer Hand Gun: ELMA Vision VM Serial number: 9420356 IMA Weight: 35 kg Standard: EN500063 Description This welding system from ElmaTech consists of a high-performance medium frequency inverter (QSVM 9000/12000T) and an MF transformer hand-held welding gun (ELMA Vision VM). It is specifically designed for professional resistance spot welding and is ideal for: - Automotive manufacturing and bodywork - Metalworking - Robotic welding cells - Manual and semi-automatic spot welding workstations Medium frequency technology (10 kHz) ensures: - High energy efficiency - Stable welding results - Reduced electrode wear - Optimum process control Technical Data – MIDISpot Vision QSVM 9000/12000T (MF Inverter) Output U₀: 560 V Frequency: 10 kHz Current range: 0 – 200 A Duty cycle: 5% Input Voltage: 3~ 400 V Frequency: 50/60 Hz Power: 75 kVA Protection class: IP 21 Other data Insulation class: F Cooling: WF (water cooling) Weight: 95 kg Technical Data – ELMA Vision VM (MF Transformer Hand Gun) Output U₂₀: 12.5 V Current range: 0 – 15 kA Welding energy: 15 kAs Input Uₙ: 560 V Frequency: 10 kHz Power: 30 kVA Duty cycle: 50% Protection class: IP 21 Other data Insulation class: F Cooling: WF (water cooling) Weight: 35 kg Typical Applications - Spot welding of steel and stainless steel - Body shop / vehicle production - High-cycle industrial manufacturing - Robotic welding operations - Repair and rework stations

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 380850, Double grinding machine dijual Cgodpfxox Aruvj Am Iet

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, ElmaTech MIDISpot Vision QSVM 9000/12000T + ELMA Vision CM – MF Spot Welding System Manufacturer: ElmaTech GmbH System consists of: MF Inverter: MIDISpot Vision QSVM 9000/12000T MF Transformer Hand Welding Gun: ELMA Vision CM Serial Numbers: 9420357 IMA / 9420363 IMA Standard: EN500063 Condition: Used, technically perfect Description For sale is a complete ElmaTech MF spot welding system, comprising a high-performance medium-frequency inverter (QSVM 9000/12000T) and the corresponding MF transformer hand welding gun ELMA Vision CM. This system is designed for industrial resistance spot welding applications. Typical areas of use include: - Vehicle manufacturing - Automotive suppliers - Metal processing - Robotic welding cells (e.g. KUKA, ABB, FANUC) - Manual spot welding workstations Thanks to medium frequency technology (10 kHz), the system offers high energy efficiency, fast controllability, and superior weld quality. Technical Data – MF Inverter QSVM 9000/12000T Output U₀: 560 V Frequency: 10 kHz Current range: 0 – 200 A Duty cycle: 5 % Input Voltage: 3~ / 400 V Frequency: 50/60 Hz Power: 75 kVA Protection class: IP 21 Additional information Insulation class: F Cooling method: WF (water cooling) Weight: 95 kg Cgedex Au Tnspfx Am Iet Technical Data – ELMA Vision CM (MF Transformer Hand Welding Gun) Output U₂₀: 12.5 V Current range: 0 – 15 kA Energy / I₂max: 15 kAs Input Uₙ: 560 V Frequency: 10 kHz Duty cycle: 50 % Power: 30 kVA Protection class: IP 21 Additional information Weight: 35 kg Insulation class: F Cooling method: WF (water cooling)

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: BO844, DEMAG KBK overhead crane system with runway, approx. dimensions 8x5.5m (5.5m bridge) Multiple units of this crane are available! Load capacity / lifting capacity: 500 KG - 0.5t Technical specifications of the system: Runway made from Demag KBK2 rails System is delivered complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers, etc. Crane is equipped with internal power supply Cjdpfx Ameupvyce Iogt Including 500KG Demag chain hoist – lifting height approx. 4m Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems also available. Load capacities from 125KG to 1600KG Please inquire about your runway with the required load capacity and dimensions without obligation.

Kondisi: baru, werkbank-2024-translation-1 Csdpov Tm Icjfx Am Iegt