MESIN PRESS HIDROLIK 300/100 TON

CRONOSSTECH CHSP 300/100

Kondisi: siap digunakan (bekas), Peralatan terdiri dari: 1 - Menara decoiler dengan 4 decoiler (AG 3000 a) kapasitas per decoiler: 3 ton panjang lengan: 1350 mm kecepatan maksimum: 25 m/menit, dikendalikan frekuensi 2 - Selektor gulungan (MT-4 1250) min: 150 mm kecepatan maksimum: 25 m/menit, dikendalikan frekuensi 3 - Unit perata (RM-4 1250) min: 150 mm kecepatan maksimum: 25 m/menit, dikendalikan frekuensi 4 - Unit pemotongan (TS 1250 + KST-2) min: 150 mm kecepatan maksimum: 25 m/menit, dikendalikan frekuensi Ljdpsxqh Saofx Aaheak 5 - Gunting Schechtl untuk pemotongan presisi dengan kontrol CNC Siemens Touch 1250 x 2 mm

Kondisi: siap digunakan (bekas), Perlengkapan terdiri dari: - 3 decoiler Elba kapasitas 5 ton - 1500 mm - Unit pelurus RAS 26.45 - Unit pemotongan sudut Ras - Unit hidrolik Ras untuk penggilingan tulangan pada plat - Gunting RAS untuk pemotongan panjang RAS 82.16 - Mesin folding RAS Kecepatan: 15 m/menit Daya: 16 kW Laedpfxjwwbf Nj Aahjk

Kondisi: bekas, Tahun pembuatan: 2007, Druck 315 t Ständerweite 1750 mm Hub 700 mm Entfernung Tisch/Stößel, gr. Hub oben, Verst. oben 1200 mm Tischfläche 1600 x 1500 mm Ziehkissendruck im Tisch 125 t Ziehkissenhub im Tisch 200 mm Ziehkissenfläche 1200 x 1400 mm Tischhöhe über Flur 750 mm Stößelfläche 1640 x 1500 mm Antriebsleistung 55,0 + 11,0 kW Gewicht 29,5 t Raumbedarf (BxTxH) 3,2 x 4,5 x 5,8 m Höhe über Flur 5,1 m Baujahr 1983 2007 Steuerungsmodernisierung Siemens S 7 Für Handeinlegearbeiten zugelassen gemäß CE-Norm Lajdpfx Aasvuukbohek mit ölhydraulischem Antrieb, hydraulischem Ziehkissen im Tisch, hydraulischer Schnittschlagdämpfung kann ohne in Betrieb nehmen, mit in Betrieb nehmen in gegebenem Zustand oder alternativ mit neuer Steuerung Siemens S 7-1500 F angeboten werden

Kondisi: bekas, Tahun pembuatan: 1991, Press force 500 t Upright width 1910 mm Stroke 500 mm Distance table/ram, max. stroke upper position, adj. upper position 700 mm Table area without shear impact damper 1910 x 1360 mm Table area with shear impact damper 1600 x 1360 mm Lajdpsvuuiqofx Aahsk Table height above floor 800 mm Ram area 1600 x 1270 mm Side frame opening 600 mm Downward speed 400 mm/s Upward speed 330 mm/s Working speed 10 - 28 mm/s Oil capacity 1200 l Drive power 60.0 kW Weight 40.0 t Space requirement (LxWxH) 3.6 x 2.5 x 5.0 m Total height above floor 4.5 m Approved for manual loading operations according to German accident prevention regulations (UVV) with hydraulic drive system, shear impact damping, ram locking, two-hand control Table size depending on shear impact damper: - Without: approx. 1910 x 1360 mm - With: approx. 1600 x 1360 mm Can be offered as-is, ready for operation as currently equipped, or alternatively with new Siemens S7-1500 F control system

Tahun pembuatan: 2020, Kondisi: seperti baru (mesin pameran), Hydraulic press for die testing and adjustment Brand: MHG Model: ER.2S.DM-300/2100 Serial number: 927 Lsdpfxsk Sgvyo Aahjak Year: 2020 Required power: 40 kW Hydraulic oil: 1000 L tank + 200 L circuit fill Total cycles: 403 (LIKE NEW MACHINE, HARDLY USED) Maximum force: 300 t Number of cylinders: 3 Maximum tool dimensions: 1400 x 1400 mm Maximum tool mass: 16,000 kg Maximum opening between worktable and moving table: 1690 mm Minimum opening between worktable and moving table: 960 mm Maximum stroke of moving table: 730 mm Approach speed: 92 mm/s Return speed: 93 mm/s Stop time: 0.2 s Safety distance: 500 mm Weight (empty tank): 35,000 kg

Kondisi: baru, Tahun pembuatan: 2025, de Lajdouzv Tzspfx Aahok

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Profila PIEMME mod. PM90 Decoiler Mesin Bending Mesin Las Gunting Kepala No.24 Lebar 500mm Ketebalan 2,5 Lajdpjxa H Eqjfx Aahjk

Kondisi: bekas, Tahun pembuatan: 2020, Fungsionalitas: belum diuji, tinggi total: 6.400 mm, lebar total: 4.500 mm, panjang total: 3.800 mm, kecepatan operasi: 110 mm/dtk, kecepatan mundur: 180 mm/dtk, tabel jarak ke piston: 1.500 mm, We are offering a newly built machine of the type shown here. The machine was commissioned in 2020 and can be inspected at the customer’s site. Technical Data: - Pressing force: 800 tons - Opening force: 80 tons - Motor power: 55/75 + 55/75 kW - Ram stroke: 1,000 mm - Fast advance speed: 110 mm/s - Working speed: 6 mm/s - Return speed: 180 mm/s - Guide column diameter: 250 mm - Maximum pressure: 250 bar - Usable table area: 3,500 x 2,000 mm - Lower table travel: 2,000 mm - Distance between columns: 2,000 mm - Daylight opening: 1,500 mm - Total front width: 3,800 mm Laedpfx Aajwlrv Uehok - Total side length: 4,500 mm - Overall height: 6,400 mm - Weight: 134,600 kg The MV-800E/NC-SINCRO press was specifically developed for the setting and testing of molds, dies, and stamps. The four columns, each with a diameter of 250 mm and made from C45E steel, are manufactured for heavy-duty applications. It features an optimized hydraulic system operating at up to 250 bar, ensuring long service life and reliability. The machine complies with all relevant safety and health requirements according to CE regulations. STRUCTURE AND TABLE • Frame designed to withstand 600 tons of concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. • Usable table area: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC SYSTEM • Two double-acting hydraulic cylinders, each with 400 tons force. • Single-stage hydraulic power unit with automatic shut-off of advance speed and independent operation, equipped with a decompression system and proportional pressure pre-fill valves. Digital potentiometers on the upper table for displacement control and an electronic synchronizing system for compensation of off-center or unbalanced loads. • The press is equipped with a lateral pressure switch for optimal pressure adjustment for each job. • Glycerin pressure gauge with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electrical system allowing operation with one or two main cylinder advance speeds. • The press offers both manual and automatic cycle modes (activated via a test selector switch): - Manual cycle allows step-by-step execution of all press movements at low speed. - Automatic cycle allows the press to run a complete production cycle. • Electrical safety system for upper table fall protection. • Lower table with hydraulic extraction and mechanical stops. • The machine is equipped with an operator panel featuring a touchscreen display for input of operating and calibration data. • 2 safety light curtains (category IV, 1,000 mm) installed at the front and rear. • Electrical components by Siemens, manufactured to IP55 protection class in accordance with applicable CE regulations and standards. • Electrical and hydraulic functions are redundant and self-monitored. Includes an additional safety block and self-check devices for operation and safety. Includes verification and certification of proper function and safety distance for light curtains. • Safety is ensured by a laser and area protection system with category IV light curtains.

Kondisi: bekas, Tahun pembuatan: 1997, Pressing force: 1000 t Clearance between uprights: 1260 mm Stroke: 315 mm Ledpevuukusfx Aahsak Stroke rate: 10, 21 - 42 /min Distance table/ram, large stroke at top, adjustment at top: 1295 mm Table surface: 1250 x 800 mm Table height above floor: 670 mm Lateral clearance between uprights: 830 mm Ejector force in table: 63 t Ejector stroke in table: 75 mm Ejector force in ram: 16 t Ejector stroke in ram: 23 mm Ram surface: 1250 x 800 mm Ram adjustment: 20 mm Transfer feed length: 0 - 250 mm Programmable slide travel per guide: 0 - 140 mm Transfer device stroke rate: 42 /min Drive power: 135.0 kW Weight: 120.0 t Space requirements (W x D x H): 5.9 x 4.8 x 7.95 m Height above floor: 6.95 m Height below floor: 1.0 m with DC drive, pneumatic clutch, motorized ram wedge adjustment, pneumatic ram weight compensation, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram locking, tool clamping system for table and ram, motorized central lubrication, oil impulse lubrication, grease lubrication Press control: Siemens S5 - CNC 2-axis transfer (manufacturer Dreher, type STV-D model 350/100-SO, year 2008), control Siemens S7 - Cleaning system (manufacturer Beyss, year 1989) as is and lies, WITHOUT commissioning, disassembled and stored The press was installed in a soundproof cabin by the previous owner, which is not included in the scope of delivery Video of the machine prior to disassembly available

Kondisi: bekas, Tahun pembuatan: 1993, Pressing force: 100 t Upright clearance: 1900 mm Stroke: 500 mm Distance table/ram, stroke up: 800 mm Table surface: 1850 x 1000 mm Pass-through opening in table: 160 mm Table height above floor: 850 mm Ram surface: 1850 x 800 mm Lateral upright passage: 540 mm Speed down: 400 mm/s Speed up: 400 mm/s Working speed: 20 - 70 m/min Laodpfjvuui Dsx Aahsk Oil capacity: 900 l Drive power: 34.0 kW Weight: 13.0 t Space requirements (WxDxH): 2.7 x 2.2 x 4.0 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV) With oil-hydraulic drive, hydraulic shock absorption, hydraulic ram locking No foundation pit required Can be offered without commissioning, with commissioning in as-is condition, or alternatively with new Siemens S7-1500 F control system