H tipe 400/150 ton hidrolik deep drawing press

CRONOSSTECH CHSP 400/150

CRONOSSTECH CHSP 400/150

H-Type Hydraulic Deep Drawing (Flanging) Press – 8 Guide Rails

General Description
Predpfjx N Uhhox Aahsf

The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow for sheet forming, deep drawing, and flanging applications. Thanks to its 8-slider H-frame design, maximum rigidity is ensured during the pressing operation; parallelism and perpendicularity tolerances are consistently maintained throughout the long stroke.

The CHSP 400/150 model, with a 400-ton main ram and a 150-ton cushion ram (blankholder), is designed for deep drawing and flanging applications requiring high tonnage. The frame construction is stress-relieved by vibration to ensure long-lasting and reliable operation.

⚙️ Standard Equipment

- Steel construction, 8-guide H-frame press body
- Stress-relieved frame by vibration
- Bronze Zr14 slide bearings
- Fully certified welding applications with TÜRK-AK accredited WPQR and WPS approvals (EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing in compliance with CE standards
- PLC-controlled hydraulic system
- 7” DELTA touchscreen panel
- Adjustable stroke control for ram and cushion
- Adjustable ram and cushion tonnage (pressure) control
- Automatic lubrication system
- Electronic filter contamination warning system
- Display of hydraulic unit oil temperature and system status on screen
- Cooling system
- Off-line filtration
- Safety systems to ensure operator protection
- SIEMENS – SCHNEIDER electrical components

📐 Technical Specifications – CHSP 400/150

- Type: Steel construction, 8-guide H-frame press body
- Frame Material: St52 – ERDEMİR
- Slide Bearings: Bronze Zr14
- Capacity (Ram): 400 Ton
- Capacity (Cushion/Blankholder): 150 Ton
- Moving Table Size: 1200 × 1500 mm
- Fixed Table Size: 1200 × 1500 mm
- Parallelism Tolerance: 120 micron/m
- Perpendicularity Tolerance: 60 micron/m
- Stroke (Ram): 1000 mm
- Stroke (Cushion): 350 mm
- Min. daylight: 100 mm
- Max. daylight: 1100 mm
- Stress relief: Vibratory stress relieving
- Welding application: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1:2017

(Welding procedures are supervised by ‘welding coordination engineers’ certified as per EN ISO 14731)

- Max. Working Pressure: 250 Bar
- Total Motor Power: 37 kW – IE3
- Main Pump: 45 cm³ – REXROTH or PARKER
- Moving Table Fast Down Speed: 150 mm/sec
- Moving Table Drawing Speed: 12 mm/sec
- Moving Table Return Speed: 170 mm/sec
- Cushion Table Forward Speed: 30 mm/sec
- Main Cylinder Bore: Ø450 mm – Ck45
- Cushion Cylinder Bore: Ø280 mm – Ck45
- Auxiliary Acceleration Cylinders: 2 units
- Approximate Press Height: 5600 mm
- Approximate Press Width: 3250 mm
- Approximate Press Depth: 2200 mm
- Die Height from Floor: 1400 mm
- Pre-fill Valve: NG 150
- Hydraulic Unit: REXROTH or PARKER
- Cooling System: EMMEGI – CIESSE – PARKER
- Off-line Filtration: REXROTH or PARKER
- Linear Measurement Scale: NOVATECHNIK or TURCK
- PLC: DELTA
- Touchscreen Panel: DELTA 7”
- Electrical Components: SIEMENS – SCHNEIDER
- Approximate Weight: 24 Tons

Production Note

This machine is manufactured by CRONOSSTECH in Turkey.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.