32X3MM - Mesin Bending Pipa Hidrolik dengan Mandrel

CRONOSSTECH MBB 32 H-PLC

Tahun pembuatan: 2012, Kondisi: baik (bekas), nomor mesin/kendaraan: ENOG, Demag KBK overhead crane rail system, approx. 8x4m Load capacity / lifting capacity: 250 kg - 0.25 t Technical data of the system: - Crane runway made of Demag KBK1+2 rails System is delivered complete: - KBK rails, rail connectors, trolleys, end plates, cable carrier, brackets/hangers, etc. Incl. Demag DC-COM 250kg electric chain hoist Crane has been dismantled and is immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Ihedpfx Aemqf Nfsg Row Other KBK systems also available. Load capacities from 125kg to 1,600kg Please inquire about your crane rail with desired load capacity and dimensions.

Kondisi: baru, Konstruksi baja dengan ukuran 7 m x 16 m (dapat diperpanjang), tinggi tiang: 4,176 m (lebih tinggi) dan 3,338 m (lebih rendah). Di penawaran lain, kami menyediakan konstruksi dengan tiang yang lebih tinggi: 5 m (lebih tinggi) dan 4,17 m (lebih rendah), serta dengan berbagai panjang dan varian dengan atau tanpa dudukan gording dinding. Semua material tersedia secara langsung, sehingga pelanggan dapat melihatnya sebelum membeli dan memulai pembangunan tanpa risiko pembayaran uang muka. Iodpfx Ajychl Ejg Rshw Konstruksi kami telah digalvanisasi, memberikan perlindungan antikorosi terbaik.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Mandrel Bending Machine S4501 ----- For the production of pipe geometries with bending radii from 1.5 x D → Maximum bending capacity for pipes: 42.4 x 3.25 mm (steel, max. Re 240 N/mm²) → Maximum bending capacity for pipes: 30 x 30 x 3 mm → Maximum bending capacity for pipes: 42.4 x 2 mm (stainless steel, max. Rp0.2 260 N/mm²) → Total connected load: 3 kW → Pipe feed length: approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display enables easy and intuitive programming and operation of the machine. After the pipe is fed in, it is clamped in the carriage by the chuck, allowing for precise positioning of the pipe and, thus, the creation of dimensionally accurate geometries. The standard configuration also includes pipe geometry verification before the bending process: if the bending process is started at an incorrect position, the machine will not allow operation. This eliminates operator errors. Optional additional features provide increased convenience and boost the output and efficiency of the system. Data exchange with the optional TBS-3D pipe calculation program (PC version) is handled via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → Servo drive for the bending axis 1.5 kW → Adjustable speed → Left-hand bending direction → Bending angle resolution: 0.1° → Maximum bending radius: 120 mm → Bending shaft diameter: 50 mm → Servo-driven feed → Servo-driven rotation → Three-jaw chuck for securing the pipe in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic pipe clamping with adjustable clamping pressure → Programmable mandrel pre-retraction PLC control: → 10" color touchscreen Ihodpfx Agotr U Hlj Rsw → ETH 10/100, X2X Link, 2xUSB → Foot pedal operation → Data transfer via LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control system calculates feed values and bending angles immediately upon input of length and angle. Power supply: 400V 16A Dimensions: L:2.3m x W:1m x H:1.4m Weight: approx. 1200 kg

Kondisi: baru, Cutting diameter 225 mm Saw band length 2480 mm Cutting width 250 mm Cutting speed 45 / 90 m/min Saw band dimensions 2480 x 27 x 0.9 mm Cutting capacity at 45 degrees: flat 135 x 185 - 145 x 150 mm Cutting capacity at 45 degrees: round 150 mm Cutting capacity at 45 degrees: square 145 mm Cutting capacity at 60 degrees: flat 63 x 107 - 69 x 90 mm Cutting capacity at 60 degrees: round 70 mm Cutting capacity at 60 degrees: square 70 mm Cutting capacity at 90 degrees: flat 240 x 160 - 250 x 110 mm Cutting capacity at 90 degrees: round 225 mm Cutting capacity at 90 degrees: square 185 mm Total power requirement 0.75 / 1.1 kW Machine weight approx. 200 kg Space requirement approx. 1385 x 580 x 890 mm Technical features: - Hydraulic system for controlling the saw head descent - End switch at the end of the cut - Powerful three-phase induction motor with 2 speeds and oil-bath gearbox Ihsdpfx Agslb I Daj Rsw - Saw bow, vise and pivoting assembly made of cast steel - Steel saw band guide with ball bearings - Quick-release vise - Front integrated lever for locking the miter adjustment - Coolant pump with aluminum body - Large handwheel for easy saw band tensioning - Pressure gauge for displaying band tension (600-1000 kg/cm3) - Emergency stop safety switch - Chip brush for cleaning the saw band STANDARD EQUIPMENT: - Mountable base cabinet - Coolant tank - Electric coolant pump - Length stop for serial cuts - Tools for band replacement and adjustments - Chip removal brush - Hydraulic cylinder with feed adjustment

Kondisi: bekas, Tahun pembuatan: 2017, Diameter pipa (maks.): 80 mm, panjang mandrel: 4.500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5xD → Maximum bending capacity tube 76 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity tube 76 x 2.9 mm (stainless steel) → Total connected load 7 kW → Tube feed length 4.5 m Robust and durable steel construction in a rigid connection – no torsion-prone design caused by, for example, a split construction of bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The control’s touch display allows for easy and intuitive programming and operation of the system. Once the tube is fed in, it is clamped in place in the carriage by the chuck, ensuring exact tube positioning and enabling the production of dimensionally accurate geometries. Also standard is a tube geometry check before the bending process: If the bending process is started at the wrong position, the machine does not grant approval, thus preventing operator errors. Optional additional features provide greater comfort and increase output, thereby improving system efficiency. Data exchange from the optional tube calculation software TBS-3D (PC version) is performed via USB stick or by FTP access of the computer to the machine control. USB or LAN (RJ45) ports are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard features: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec) → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic rotation measurement ±0.1° → Manual stop system (longitudinal overrun stops) Ihsdpfottah Rjx Ag Rsw → Manual indexing system (15° rotational increments) → Three-jaw chuck for securing the tube in the carriage → External control panel PLC control system: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot pedal operation → Data transmission via network (W)LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. After entering length and angle, the control automatically calculates the feed values and bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable premature mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (with rollers) → Radius extension Photos show new machine.

Tahun pembuatan: 2004, Kondisi: baik (bekas), nomor mesin/kendaraan: 0441057, Offer 23300 Technical Specifications: - Abrasive belt dimensions: 75 x 2000 mm - Surface grinding opening: 75 x 300 mm Ihodspug D Ejpfx Ag Rew - Adjustable-angle support vise: 90° to 30° - Belt speed: 15 + 30 m/sec - Possible contact wheel diameters: 20 - 76 mm - Contact wheel length: 75 mm - Drive: 400 V / 2.2 / 3 kW - Drive speeds: 1440 / 2880 rpm - 1 piece contact wheel: 48 mm - Required floor space (approx.): W 800 x H 1000 x D 1300 mm - Weight (approx.): 250 kg

Kondisi: baru, Tahun pembuatan: 2019, gaya penekanan: 275 t, Pressure: 275 t Distance between uprights: 3,000 mm Total power requirement: 30 kW Approx. machine weight: 40 t Retracting force: 27 t Max. pump capacity: Axial pump with proportional valve Ihedpfefxyigex Ag Row Bridge travel: 6,000 mm Lateral cylinder travel range: max. 3,000 mm Table size: 6,000 x 3,000 mm Table height above floor approx.: 700 mm Max. distance from table to ram: 1,100 mm Oil tank: 450 l Bridge traverse speed (X and Y): 30-33 mm/sec Cylinder lowering speed: 2-10 mm/sec Cylinder stroke speed: 2-50 mm/sec Cylinder stroke: 900 mm Cylinder diameter: 440 mm Ram extension: 200 / 200 mm / Ø Cylinder traversed by servomotor via rack and pinion: 40 mm Control system: Siemens S7 1200 Monitor: Siemens 9", Touch Panel Control console: portable

Kondisi: siap digunakan (bekas), Mesin Elgo CNC, sangat mudah dan ramah pengguna Kapasitas pipa maks: diameter 76 mm x 4 mm tebal Pipa kotak maks: 70 x 70 mm Radius maks: 600 mm Sudut tekuk: 180° Ihodpfx Agsxpghqo Row Mata alat standar 3D Mata alat khusus sesuai permintaan Panjang: 1200 mm Lebar: 800 mm Tinggi: 1300 mm

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2021, gaya penekanan: 400 t, Portal-type straightening press with 400 T capacity Oil-hydraulic double-column press a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 60 mm/sec Iedpshyc Nwjfx Ag Rehw c) Table size 6000 x 3000 mm d) Daylight (open height) 1500 mm e) Overall dimensions approx. L x W x H 6000 x 5000 x 4500 mm f) Oil temperature display on reservoir g) Lubrication via grease nipples h) Table in grid (raster) construction i) Controls mounted on swing arm attached to the bridge j) Pressure adjustment from 60 T to 400 T via MONITOR k) Bridge traverses via two gear motors, operated by rack and pinion l) Cylinder moves left and right via rack and pinion m) Machine frame powder-coated and/or double-painted n) T-slots as per customer specification o) Cylinder induction-hardened GANTRY PRESS Thermally neutral 80 – 120 °C Number of operator sides: 3 sides Forces Maximum pressing force: 4000 kN Maximum stripping force: 600 kN Pressure build-up time (closed die, steel-on-steel): max. 3 sec Dimensions Maximum opening width: 1500 mm Stroke and minimum opening: 1500 mm / 0 mm Table height above floor: approx. 900 mm Total height above floor (installation height): approx. 4500 mm Minimum hall height: 5500 mm Deflection Measured at max. closing force with 70% load:

Tahun pembuatan: 1990, Kondisi: baik (bekas), 20191 Year of manufacture: approx. 1990, overhauled in 2002 Technical Data: - Bending capacity at 45 kg / mm² up to approx. Ø 25 x 3 mm Isdpfx Agshrdmbe Rjhw - Bending angle selectable left and right - Hydraulic double-sided bending function - Hydraulic adjustment - Drive: 400 V / 11 kW - Space requirement: approx. W 1750 x H 2200 x D 2300 mm - Weight: approx. 1600 kg - with bending angle adjustment - Hydraulic clamping - Bending tools