Hangat: +50°C / +200°C Dingin: -80°C / +100°C

CTS Temperaturschock-Prüfschrank TSS-70/130 130 Liter

CTS
Type: TSS-70/130
Water-cooled chiller unit
For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130.
This unit is designed for conducting thermal shock tests and is typically used in industry, research, and quality assurance.
Application areas:
- Material testing
- Aging tests
- Electronics and component testing
- Thermal shock and cyclical temperature testing

Technical data:

- Type: TSS-70/130
- Test volume: 130 liters
- Temperature range:
- Hot chamber: +50°C to +200°C
- Cold chamber: -80°C to +100°C
- Heating rate: approx. 6 K/min from ambient to +180°C
- Cooling rate: approx. 4 K/min from ambient to -60°C
- Temperature deviation:
±1 K over time
±2 K spatially
- Rate of temperature change:
max. 100 K/min on average for thermal shock testing
without radiant heat
- Transfer time between chambers:
≤ 15 min in the range from -65°C to +200°C with 10 kg ICs
- Switching time:
< 10 seconds

Electrical data:
- Connection: 400 V, 3/N, 50 Hz
- Rated power: approx. 16.7 kW
- Rated current: approx. 26.8 A
- Site-side fuse: 32 A (slow blow)
- Connector: Cekon 32

Refrigeration system:
- Refrigerants: R404A / R23
Giedpfx Aoy Hkfdelkot
- Water-cooled, low-noise, fully hermetic

Features / Equipment:
- CTS control panel
- Microprocessor controlled regulation and monitoring system
- Programmable operation
- Up to 100 test programs possible
- Digital setpoint and actual value display
- RS232 interface
- 2 free switching channels for external test specimen control
- Failure warning via potential-free contact
- Load up to 30 V-DC, 2 A
- EMC tested

Technical design:
- Hot and cold chambers
- Trolley with spindle drive
- Test compartment / trolley made of stainless steel, material no. 1.4301
- Removable basket made of stainless steel wire
- Pipe sleeve NW 50 with closure plug
- Compressed air connection 1/4" male thread
- Condensate drain (non-pressurized) R 1/2" internal thread
- Safety door lock
- Lockable door with window

Dimensions as per installation drawing:
- External dimensions approx.: 2335 x 940 x 1820 mm
- Delivery opening approx.: 1990 x 940 x 1652 mm
- Test space dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm
- Window: 300 x 300 mm

Additional data:
- Protection class: IP 22
- Noise level: < 60 dB(A)
- Weight: approx. 950 kg
- Average consumption per test cycle: approx. 8 kWh

For your safety as a buyer, please note:
The following points are carried out in advance for all chambers we offer:
1. Function check and replacement of necessary components
2. Refilling with legally compliant refrigerants if required
3. Leak test with certificate
4. After successful inspection, chambers undergo a documented test run.

Condition: used
Scope of delivery: see photos
(Specifications subject to change or errors!)
Further questions can be answered by phone.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.